排序方式： 共有73条查询结果，搜索用时 15 毫秒
31.
三叠纪华南俯冲陆壳已经延伸到华北克拉通东南缘的蚌埠地区, 而该地区的俯冲陆壳是否经历超高压变质仍存在诸多争议。对华北克拉通东南缘蚌埠地区的侏罗纪花岗岩——荆山岩体中的暗色残留体、主体花岗岩以及细晶岩脉中的白云母进行岩相学观察、电子探针和拉曼光谱分析,结果表明荆山残留体和主体花岗岩中白云母颗粒较大且相对于一般花岗岩中原生的、次生的白云母具有较高的Si、Fe+Mg原子数和较低的Al原子数。拉曼光谱分析结果显示残留体和主体花岗岩中大颗粒白云母也具有相似的铝原子桥氧键(Al,O(br))的拉曼位移(421 cm-1),低于经历超高压的黄镇榴辉岩中多硅白云母的原子数和铝原子桥氧键的拉曼位移,而高于本研究中未经历超高压变质作用的奥地利Spail片岩中的白云母。残留体和花岗岩中大颗粒白云母的主量元素和拉曼位移特征指示其为变质成因的多硅白云母。因此,可以利用多硅白云母地质压力计来指示花岗岩形成的压力,并且确定荆山花岗岩发生部分熔融的压力为1.0~1.3 GPa。荆山花岗岩的源岩为华南深俯冲的陆壳碎片,华南板块俯冲到华北克拉通东南缘的深度为33~45 km,相当于华北克拉通中下地壳深度。 相似文献
32.
A Low-Variance Mineral Assemblage with Talc and Phengite in an Eclogite from the Saxonian Erzgebirge, Central Europe, and its P-T Evolution 总被引：1，自引：0，他引：1
A light-coloured, fine-grained eclogite sample from near thevillage of Hammerunterwiesenthal in the Erzgebirge (NW BohemianMassif) preserves the low-variance mineral assemblage of garnet,omphacite, phengite, talc, amphibole, clinozoisite, quartz,rutile, and accessory phases. Porphyroblasts of amphibole, clinozoisite,and phengite formed during a late stage (III) of metamorphism.Paragonite joined the assemblage late in this stage (IIIb).The chemical zonation of the minerals was carefully studied.Various geothermobarometric methods were applied, especiallyinvolving phengite and talc. The constrained P–T pathfor the eclogite starts at about 480°C and 25 kbar (stageIb), followed by a significant temperature rise (stage II) atslightly increasing pressure. At the peak P–T conditionsof 720°C and 27 kbar, blastesis of amphibole, clinozoisite,and phengite was caused by infiltrating hydrous fluids. Theresulting density reduction may have allowed buoyant upliftof the eclogite. Subsequently, significant cooling occurredat high pressures. Stage IIIb is characterized by P–Tconditions around 520°C and 18 kbar at reduced water activities.This unusual late P–T evolution might explain the freshnessof the eclogite, including the preservation of chemical zonationon the micrometre scale. KEY WORDS: eclogite; Saxonian Erzgebirge; P–T evolution; talc; phengite 相似文献
33.
郯庐高压走滑韧性剪切带特征及其^40Ar／^39Ar定年 总被引：14，自引：2，他引：14
本文首次报导苏鲁造山带西缘新发现的北东向郯庐高压左旋走滑韧性剪切带。剪切带糜棱岩中长石与石英皆广泛发生了动态重结晶,其重结晶型式指示变形温度高达600～700℃。糜棱岩基质中新结晶的白云母,经电子探针分析指示为多硅白云母,所计算的形成压力为1.03～1.45 GPa,表明形成于地壳底部的高压榴辉岩相环境。工作中对剪切带糜棱岩中6个多硅白云母样品进行了~(40)Ar/~(39)Ar测年,其中2个超糜棱岩基质中新结晶多硅白云母分别给出了209.9±1.5Ma 和214.3±1.4Ma(皆晚三叠世)的~(40)Ar/~(39)Ar 坪年龄,指示了左旋走滑的冷却年龄。这些年龄值与苏鲁超高压变质带内已有的多硅白云母~(40)Ar/~(39)Ar 年龄基本一致,表明郯庐断裂带形成于华北与华南板块的碰撞造山期。结合其它地质现象,笔者认为在这两个板块碰撞中郯庐断裂带是以陆内左旋变换断层的型式出现的,从而将大别与苏鲁造山带大规模左行错开。 相似文献
34.
35.
高压下多硅白云母的拉曼光谱学研究 总被引：1，自引：0，他引：1
在金刚石压腔中，通过原位拉曼光谱研究了多硅白云母在常温高压下的稳定性。实验获得了多硅白云母从常压到20GPa的拉曼光谱数据，研究了多硅白云母的266、708和3618cm^-1叫谱峰与压力的相关性。研究发现，多硅白云母的708cm^-1叫谱峰随压力增加有规律地向高频方向偏移，与压力的增加呈明显的正相关性，即y（拉曼位移，cm^-1）=0．5238x（压力，GPa）＋712．31，相关系数R^2=0．9656，并且该谱峰在压力4．7GPa时消失，这可能与多硅白云母中的Si、Al替代有关。羟基3618cm^-1谱峰则随压力增加向低频方向移动，谱峰的降低与压力的增加呈明显的线性关系变化（y=-0．3402X＋3617．8，R^2=0．9662），并且强度随着压力的增加也在逐渐减弱，在压力达18GPa时开始消失，推测该压力可能为多硅白云母在常温下脱羟基的极限压力。 相似文献
36.
Eclogites from the Chinese continental scientific drilling borehole, their petrology and different P-T evolutions 总被引：1，自引：0，他引：1
Abstract Four phengite‐bearing eclogites, taken from different depths of the Chinese continental scientific drilling (CCSD) borehole in the Sulu ultrahigh pressure terrane, eastern China, were studied with the electron microprobe. The compositional zonations of garnet and omphacite are moderate, whereas phengite compositions generally vary significantly in a single sample from core to rim by decrease of the Si content. Various geothermobarometric methods were applied to constrain the P‐T conditions of these eclogites on the basis of the compositional variability of the above minerals. The constrained P‐T path for sample B218 is characterized by pressure decrease from ca 3.0 GPa (ca 600°C) to 1.3 GPa (ca 550°C). Eclogite B310 yielded P‐T conditions of 3.0 GPa and 750°C. The path for eclogite B1008 starts at about 650°C and 3.6–3.9 GPa (stage I) followed by a pressure decrease to 2.8–3.0 GPa and a significant temperature rise (stages II and IIIa, 750–810°C). Afterwards, this rock cooled down to 620–660°C at still high pressures (2.5–2.7 GPa, stage IIIb). Retrograde conditions were about 670°C and 1.3 GPa (stage IV). Eclogite B1039 yielded a P‐T path starting at ca 600°C and 3.3–3.9 GPa (stage I). A pressure decrease to about 3.0 GPa (stage II, 590–610°C) and then a moderate isobaric temperature increase to ca 630°C (stage III) followed. Stage IV is characterized by temperatures of 650°C at pressures close to 1.3 GPa. During and after this stage (hydrous) fluids partially rich in potassium penetrated the rocks causing minor changes. Relatively high oxygen fugacities led to andradite and magnetite among the newly formed minerals. We think that the above findings can be best explained by mass flow in a subduction channel. Thus, we conclude that the assembly of UHP rocks of the CCSD site, eclogites, quartzofeldspathic rocks, and peridotites, cannot represent a crustal section that was already coherent at UHP conditions as it is the common belief currently. The coherency was attained after significant exhumation of these UHP rocks. 相似文献
37.
烃类包裹体气液比的精度对PVT模拟结果可靠性有重要影响,而气液相边界的判断对气液比测定准确性至关重要。本文开发了一种精确测量烃类包裹体体积的方法,即利用高分辨率激光共聚焦显微扫描技术获取烃类包裹体3D图,在透射及荧光模式下用三维坐标标定液相的边界,利用3Dfor LSM软件计算烃类包裹体液相的体积;同时利用激光共聚焦显微荧光技术对横穿气液两相的直线进行线扫描,根据扫描线上荧光强度的突变判断气相边界,多次扫描求平均值作为气相直径。本方法避免了人为判断包裹体气相边界的不可靠性,对气液边界的确定精度可达0.02μm,提高了气液比测试精度,使得利用包裹体恢复古压力结果更加可靠。 相似文献
38.
Conglomerates of the Kuma Group, central Shikoku, southwest Japan contain Sanbagawa schist clasts with a variety of metamorphic grades and lithologies. K–Ar and 40 Ar/39 Ar dating of phengite show all the pelitic schist clasts from low- to high-grade zones have similar phengite ages (82–84 Ma) that are significantly older than those from the in situ Sanbagawa sequence of central Shikoku. This is because the Kuma–Sanbagawa sequence was exhumed earlier than the in situ Asemi sequence with an exhumation process intermediate between those for the Kanto Mountains and the in situ Asemi sequences. 40 A/39 Ar plateau ages (103 and 117 Ma) of phengite in amphibolites indicate the timing of the early stage of the exhumation of the metamorphic pile, probably close to the peak metamorphic age. 相似文献
39.
LIU Fulai ZHANG Zeming XU Zhiqin YANG Jingsui XU HuifenInstitute of Geology Chinese Academy of Geological Sciences Beijing China 《《地质学报》英文版》2000,74(2):183-189
Study of micro-area chemical compositions indicates that phengite in albite gneiss from hole ZK2304 of the Donghai region has evident compositional zoning. SiO2 and tetrahedrally coordinated Si contents decrease, and Al2O3, AlIV and AlVI contents increase gradually from core to rim. However, K2O, MgO and FeO contents basically remain unchanged from core to rim. According to P-T estimates obtained from geothermometers and barometers, combined with previous experimental data, the core belt (micro-area I) of phengite was formed at T=637-672℃ and P=1.55-1.73 GPa, and the transitional belt (micro-area II) of the phengite were formed at r=594-654℃ and P=1.35-1.45 GPa. Towards the rim belt (micro-area III), the temperature decreased slightly, but the pressure decreased rapidly with r=542-630℃ and P=1.12-1.19 GPa. The P-T evolution path recorded by the compositional zoning of phengite is characterized by significant near-isothermal decompression, revealing that the gneiss has. undergone high-pressure-ultrahi 相似文献
40.
大别山东缘郯庐两期走滑剪切带形成的温压条件与造山带折返的关系 总被引：16，自引：8，他引：8
郯庐断裂带与大别造山带在大别山东缘相复合 ,并将大别—苏鲁造山带左行错开达 5 0 0km。本文以大别山东缘为研究背景 ,通过对郯庐断裂带两期左旋走滑韧性剪切带温压条件的估算及热年代学信息的分析 ,来探讨大别造山带在早侏罗—早白垩世之间的折返历史与隆升量。通过矿物组合、矿物变形特征以及白云母—绿泥石地质温度计得到郯庐早、晚两期剪切带的形成温度均为 4 0 0～ 4 5 0℃。通过多硅白云母Si原子数地质压力计计算得到早、晚两期剪切带的形成压力分别为 0 .2 5～ 0 .36GPa和 0 .2 4～ 0 .39GPa。考虑到剪切摩擦加热和构造超压的影响 ,笔者推断郯庐两期走滑剪切带形成的最大深度均不超过 12km ,且两期走滑剪切带的形成深度至多相差 1～2km。郯庐断裂带在约 190Ma和 12 8Ma经历了两期走滑冷却事件 ,而在此期间 ,大别造山带东缘经历了一个构造平静期 ,基本没有发生隆升。根据郯庐断裂带的信息 ,造山带在早白垩世的热隆事件中的隆升幅度小于 12km。 相似文献