用940 nm通道遥感水汽总量的可行性试验   总被引：7，自引：2，他引：7       下载免费PDF全文

黄意玢  董超华 《应用气象学报》2002,13(2):184-192

在940 nm水汽弱吸收带和其附近窗区选取若干探测通道, 采取不同通道组合, 模拟计算通道反射率比值, 并建立了该比值与水汽含量之间的统计关系。用探空观测独立样本检验水汽含量模拟计算结果, 相对误差小于6%。  相似文献   

DGSC—203型液动射流冲击器在地热井的试验   总被引：4，自引：0，他引：4  

菅志军  桑路等 《地质与勘探》2002,38(5):92-93

介绍了新研制的DGSC－203石油钻井液动射液冲击器的性能参数及结构设计上的创新点，测试所获得的排量与压降之间的关系曲线可指导冲击器的使用。生产性试验证明该冲击器工作稳定，可大幅度提高硬地层钻井效率，克服钻柱振动，延长钻柱的使用寿命，具有良好应用前景。  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Pseudodynamic tests on rubber base isolators with numerical substructuring of the superstructure and strain‐rate effect compensation     

F. J. Molina  G. Verzeletti  G. Magonette  Ph. Buchet  V. Renda  M. Geradin  A. Parducci  M. Mezzi  A. Pacchiarotti  L. Federici  S. Mascelloni 《地震工程与结构动力学》2002,31(8):1563-1582

A pseudodynamic testing procedure has been applied by which the seismic response of a base‐isolated building is obtained by using as specimen the isolators, while the superstructure is numerically simulated. The procedure also takes advantage of the continuous pseudodynamic testing capabilities of the ELSA laboratory, which increase the accuracy of the results and reduce the strain‐rate effect of the rubber bearings. A simple proportional correction of the measured forces compensates the remaining strain‐rate effect due to the unrealistic speed of the test. The correction factor is obtained by means of a characterizing test on the specific rubber isolators. The developed method has been successfully applied to the prediction of the seismic response of a base‐isolated four‐storey building submitted to several specified accelerograms. The results for those earthquakes as well as the effects of some changes of the parameters of the system are discussed. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response     

Norio Hori  Norio Inoue 《地震工程与结构动力学》2002,31(9):1657-1679

Dynamic damaging potential of ground motions must be evaluated by the response behaviour of structures, and it is necessary to indicate what properties of ground motions are most appropriate for evaluation. For that purpose, the behaviour of energy input process and hysteretic energy dissipation are investigated in this study. It is found that the momentary input energy that is an index for the intensity of input energy is related to the characteristics of earthquakes such as cyclic or impulsive, and to the response displacement of structures immediately. On the basis of these results, a procedure is proposed to predict inelastic response displacement of structures by corresponding earthquake input energy to structural dissipated damping and hysteretic energy. In this procedure the earthquake response of structures is recognized as an input and dissipation process of energy, and therefore structural properties and damaging properties of ground motions can be taken into account more generally. Lastly, the studies of the pseudodynamic loading test of reinforced concrete structure specimens subjected to ground motions with different time duration are shown. The purpose of this test is to estimate the damaging properties of ground motions and the accuracy of the proposed prediction procedure. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure     

Bong Yoo  Yang‐Hann Kim 《地震工程与结构动力学》2002,31(10):1777-1792

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

成矿流体演化与成矿物理化学   总被引：7，自引：0，他引：7  

费红彩  肖荣阁 《矿物岩石地球化学通报》2002,21(2):139-144

成矿流体是富含挥发分 (CO2 、CH4等 )是具有较高含盐度的特殊地质流体。本文讨论了在流体演化过程中挥发分的来源 ,指出主要来自水岩作用、有机质分解及地幔去气和岩浆 ;碱金属及卤素同样具有多来源的性质 ,以海水、含盐系淋滤、建造水为主要来源 ,含盐系重熔可以形成富含碱金属的成矿流体。流体演化过程中氢氧同位素、硫同位素的分馏主要与温度、水岩比值或硫源丰度有关。一个重要的结论是 ,成矿流体的形成主要与地质作用有关 ,而流体来源是次要的。海底热水流体的地球化学特征以高δ3 4 S值、中稀土富集及正铕异常为特征。本文总结了热水流体成矿物理化学条件 ,指出水热流体物相点 :1) 10 80℃ ,7.5× 10 8Pa水溶液与硅酸岩熔浆分熔点 ;2 )水溶液的第二个临界点是气水溶液的超临界点 (374.15℃ ,2 .2 1× 10 7Pa) ;3)水溶液的沸点 (≥ 10 0℃ ,≥ 1× 10 5Pa) ;4)水溶液的冰点 (≤ 0℃ ,1× 10 5Pa) ;5 )H2 O CO2 体系的不混溶温度点 (2 6 6℃ ,2 .15×10 8Pa[1 3 ] 等是重要的成矿相变点。  相似文献   

水晶包裹体的类型及成因综述     

赵淑霞  张良钜  林杰 《矿产与地质》2002,16(6):349-352

水晶中的包裹体是在水晶生长过程中被包裹在晶体内的由一相或多相物质组成的封闭系统。水晶中包裹体的形成与生长时的物化条件密切相关 ,而生长过程中的物化环境又直接影响了水晶的结晶习性。  相似文献   

X射线衍射峰五基本要素的物理学意义与应用   总被引：6，自引：0，他引：6  

周健  王河锦 《矿物学报》2002,22(2):95-100

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。  相似文献   

Interpretation of single-well tracer tests using fractional-flow dimensions. Part 1: Theory and mathematical models     

Gerrit van Tonder  Kornelius Riemann  Ingrid Dennis 《Hydrogeology Journal》2002,10(3):351-356

Generalized equations using fractional-flow dimensions were derived to estimate the Darcy and seepage velocities obtained from the point-dilution and the single-well injection-withdrawal field tests conducted in fractured-rock aquifers. Seepage velocities can only be estimated from single-well tests if the hydraulic conductivity and the hydraulic gradient are known a priori. However, if a radial-convergent test is also performed between two boreholes, the kinematic porosity can be estimated and be used to estimate the seepage velocity from the single-well test results. To apply the generalized equations, the flow dimension and the extent of the flow region must be known. Therefore, the generalized radial flow (GRF) model of Barker (1988; a generalized radial flow model for hydraulic tests in fractured rock. Water Resour Res 24(10):1796–1804) is used to estimate the flow dimension because of its wide range of applications. A pumping test performed on the boreholes will yield an estimate of the fractional-flow dimension by applying the GRF model. Electronic Publication  相似文献