A probabilistic approach for computing water retention of particulate systems from statistics of grain size and tessellated pore network     

Richard Wan  Mehdi Pouragha  Mahdad Eghbalian  Jérôme Duriez  Tai Wong 《国际地质力学数值与分析法杂志》2019,43(5):956-973

The paper offers an analytical determination of the hydraulic properties of an unsaturated soil with reference to its retention curve, which describes the relationship between the volumetric water content and capillarity through matric suction. The analysis combines a particulate approach focused on the physics at the pore scale, including microstructural aspects, with a probabilistic approach where the void space and grain size are considered as random variables. In the end, the soil water characteristic curve of an unsaturated granular medium along a drying path can be derived analytically based on the sole information of particle size distribution. The analysis hinges on the tessellation of a wet granular system into an assemblage of tetrahedral unit cells revealing a pore network upon which capillary physics are computed with respect to pore throat invasion by a non-wetting fluid with evolving pendular capillary bridges. The crux of the paper is to pass from particle size probability distribution to a matching void space distribution to eventually reveal key information such as void cell and solid volume statistics. Making reasonable statistically based assumptions to render calculations tractable, the water retention curve can be readily constructed. Model predictions compare quite favourably with experimental data available for actual soils, especially in the high saturation range. Having a sound scientific basis, the model can be made amenable to address a variety of soils with a wider range of particle sizes.  相似文献   

A bounding surface elasto‐viscoplastic constitutive model for non‐isothermal cyclic analysis of asphaltic materials          下载免费PDF全文

B. Shahbodagh  M.A. Habte  A. Khoshghalb  N. Khalili 《国际地质力学数值与分析法杂志》2017,41(5):721-739

An elasto‐viscoplastic constitutive model for asphaltic materials is presented within the context of bounding surface plasticity theory, taking into account the effects of the stress state, void binder degree of saturation, temperature and strain rate on the material behaviour. A stress state dependent non‐linear elasticity model is introduced to represent time‐independent recoverable portion of the deformation. The consistent visco‐plasticity framework is utilised to capture the rate‐dependent, non‐recoverable strain components. The material parameters introduced in the model are identified, and their determination from conventional laboratory tests is discussed. The capability of the model to reproduce experimentally observed response of asphaltic materials is demonstrated through numerical simulations of several laboratory test data from the literature. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Analytical solutions for advective–dispersive solute transport in double‐layered finite porous media     

Peter John Cleall 《国际地质力学数值与分析法杂志》2011,35(4):438-460

Analytical solutions for advection and dispersion of a conservative solute in a one‐dimensional double‐layered finite porous media are presented. The solutions are applicable to five scenarios that have various combinations of fixed concentration, fixed flux and zero concentration gradient conditions at the inlet and outlet boundaries that provide a wide number of options. Arbitrary initial solute concentration distributions throughout the media can be considered via explicit formulations or numerical integration. The analytical solutions presented have been verified against numerical solutions from a finite‐element‐based approach and an existing closed‐form solution for double‐layered media with an excellent correlation being found in both cases. A practical application pertaining to advective transport induced by consolidation of underlying sediment layers on contaminant movement within a capped contaminated sediment system is presented. Comparison of the calculated concentrations and fluxes with alternative approaches clearly illustrates the need to consider advection processes. Consideration of the different features of contaminant transport due to varying pore‐water velocity fields in primary consolidation and secondary consolidation stages is achieved via the use of non‐uniform initial concentration distributions within the proposed analytical solutions. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model     

Bernhard Pichler  Luc Dormieux 《国际地质力学数值与分析法杂志》2010,34(2):135-157

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

湘西合仁坪金矿床硫、铅同位素地球化学   总被引：1，自引：0，他引：1  

邓穆昆  彭建堂  胡诗倩  李玉坤  张婷 《矿床地质》2016,35(5):953-965

湘西柳林汊一带广泛分布钠长石_石英脉型金矿,合仁坪金矿床是其典型代表。文章对合仁坪金矿床的硫、铅同位素进行了研究,并与区域石英脉型金矿床进行对比,探讨了该矿的成矿物质来源,并初步确定了其矿床成因。研究表明,合仁坪金矿床硫化物的δ34S值范围较窄(-4.8‰~4.4‰),平均为-0.6‰,该矿床的硫为深源硫,由深部变质流体带入;铅的同位素组成较均一,并表现出明显的造山带铅的特点。结合区域成矿作用,进一步研究揭示,合仁坪金矿床为一典型的造山型金矿,其成矿可能与湘西雪峰山地区加里东期的造山作用有关。  相似文献   

湖南宝山矿床花岗岩类硫-铅同位素和流体包裹体研究及其成因意义   总被引：2，自引：0，他引：2  

丁腾  马东升  陆建军  章荣清  谢银财 《矿床地质》2016,35(4):663-676

宝山铜铅锌多金属矿床是湖南重要的铅锌生产基地。矿床内矽卡岩型铜(钼)矿化受侏罗纪花岗闪长斑岩的控制,而主要的铅锌矿体则产于远离岩体的碳酸盐地层中,且缺乏可靠的矿化年龄限制。为了查明宝山铅锌矿体与花岗闪长斑岩之间的成因关系,文章对宝山花岗岩类中浸染状黄铁矿的硫同位素和钾长石的铅同位素,以及铅锌矿石萤石脉石的流体包裹体进行了测试和研究,并与前人报道的铅锌硫化物矿石的硫、铅同位素进行了对比,尝试为宝山铅锌矿化的物质来源及成因提供依据。研究表明,花岗闪长斑岩中浸染状黄铁矿的δ34S值为+1.5‰~+3.5‰,与铅锌矿石硫化物(方铅矿、闪锌矿及黄铁矿)相一致;同时,花岗岩类中钾长石的铅同位素组成206Pb/204Pb、207Pb/204Pb和208Pb/204Pb分别为18.4789~18.7668、15.6835~15.7220和38.7903~39.1035,具有壳源的特征,且与铅锌矿石硫化物的铅同位素分布范围相吻合。宝山矿床的硫、铅同位素特征表明,花岗闪长斑岩应是铅锌矿化的主要硫源及金属来源。宝山矿床铅锌矿石萤石中的流体包裹体具有低温(130~150℃)、低盐度(8%)的特征,可能是岩浆热液演化到晚期的产物。结合已有的有关资料加以对比和分析,研究认为,宝山铅锌矿床的成矿物质应来源于花岗闪长岩的岩浆期后热液,在热液演化晚期迁移到远端地层中沉淀,形成了宝山的主要铅锌矿体。  相似文献   

The behavior of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability     

《Computers and Geotechnics》2016

With the aid of integral transform techniques, this paper presents an extended precise integration solution for thermal consolidation problems of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability due to a heat source. From the fundamental governing equations, ordinary differential equations are derived by employing Laplace–Hankel transforms. By applying the extended precise integration method, equations in the transformed domain can be solved, and the actual solutions are further obtained by adopting a numerical inverse transformation. The accuracy and feasibility of the proposed theory is demonstrated by contrastive analysis with existing studies. Finally, several examples are carried out to investigate the influence of heat source’s type, axial distance, burial depth of heat source, ratio of thermo-permeability, permeability anisotropy, thermal diffusivity anisotropy and stratification on the thermal consolidation process.  相似文献   

国内外前寒武纪条带状铁建造研究现状   总被引：4，自引：0，他引：4  

代堰锫  朱玉娣  张连昌  王长乐  陈超  修迪 《地质论评》2016,62(3):735-757

条带状铁建造(BIFs)主要发育于早前寒武纪时期(3.8~1.8Ga),记录了早期地球演化的重要信息且蕴含丰富的铁矿石资源。本文梳理总结了国内外BIF相关领域的研究认识及存在问题:1统计对比显示,BIF沉积事件与地幔柱、地壳增生等重大地质事件相关;2稀土元素及Nd同位素示踪表明,Fe来源于海水与海底高温热液的混合溶液,其中高温热液与海水比例为1:1000;3 BIFs缺乏负Ce异常且富集重Fe同位素,暗示沉积时古海洋整体处于缺氧环境以避免Fe~(2+)发生氧化;4一些重要科学问题尚未解决,例如Si的主要来源、沉淀机制及条带成因等;5华北克拉通BIFs多形成于约2.54Ga,BIF类型、形成时代与富矿成因等问题有待深入研究。本文认为,加强国内外典型BIFs的对比研究并适当应用现代先进测试技术,有利于探索BIF沉积的精细过程及古老克拉通的早期演化。  相似文献   

A comparison of black claystones,lignites and dump materials from the Maritsa Iztok Coal Basin,Bulgaria, using organic geochemical proxies     

《Chemie der Erde / Geochemistry》2016,76(3):405-417

Geochemical analysis of dump materials from the opencast Maritsa Iztok mines, Bulgaria, was carried out based on biomarker assemblages of hydrocarbon fractions. Organic matter (OM) and secondary transformations in three representative samples (massive black claystones and materials from the Iztok and Staroselets dump sites) were studied using geochemical proxies.A number of differences were recognised in the respective OM compositions of the samples compared to both published data and between the individual dump samples themselves. The ОM of the studied samples was found to be polar, but also contains some apolar compounds. It consists mainly of resins and asphalthenes. Claystone OM is of the dispersed type, with intense oxidative-reductive interactions in a lacustrine environment resulting in its transformation into an inert material. Dump sample kerogen is of Type II and mixed Type II/III. In all samples, “odd” numbered n-alkanes are found in higher amounts. Diterpenoids (С₁₉, С₂₀) with pimarane, abietane and phyllocladane skeletons are preponderant. Tri- and tetracyclic terpenoids and steranes have been identified in the black claystones OM only. Hopanes are present in low amounts in extractable OM from all three samples. Biomarkers indicate that black claystone OM is formed from aqueous flora, with a minor supply of gymnosperms (mainly G. Sequoia). Iztok Dump OM is structured by higher plants with an aqueous vegetation input. The Staroselets Dump OM formation is assigned to an active microbial reworking of aqueous vegetation and bacteria with a minor coniferous supply. Different geochemical parameters admit anoxic stratified bottom waters for the black claystones with an addition of deep water stagnation for Staroselets sample in a Maritsa Iztok Basin (MIB) aqueous environment.An attempt was also made to track the effect of secondary processes (oxidation, destruction, dearomatisation), temperature, water drainage and wash-out on dump materials. Leaching and weak degradation processes in the MIB dump environment are likely for a time span of ca. 40–50 years, considering the low percentage of short-chain n-alkanes, long-chain prevalence and low Pr/nC₁₇ and Ph/nC₁₈ ratios, with the Iztok Dump sample experiencing more advanced transformations.  相似文献   

湘西北寒武系沉积型镍钼矿成矿物质来源   总被引：1，自引：0，他引：1  

闫友谊 《江苏地质》2016,40(4):560-566

湘西北寒武系含矿丰富,在寒武系下统牛蹄塘组黑色岩系中赋存有磷矿、石煤、钒矿、铀矿,并有有色金属钼、镍矿及铂族元素矿物聚集。通过分析总结前人成果资料,探究镍钼矿成矿地质环境条件是在低温环境、有微生物参与及强还原环境中同生沉积,对寒武系沉积型镍钼矿成矿物质来源提出了明确的看法,即成矿物质来源于海底喷流-热水。  相似文献