思林水电站通航建筑物高边坡稳定分析和评价     

徐力群  沈振中  俞凯加  吕军 《岩土力学》2008,29(Z1):42-46

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.  相似文献   

拉拉铜矿黄铁矿微量元素地球化学特征及其成因意义   总被引：6，自引：0，他引：6  

周家云  郑荣才  朱志敏  陈家  沈冰  李潇雨  罗丽萍 《矿物岩石》2008,28(3)

四川会理拉拉铜矿床是我国著名大型富铜矿床,针对该矿床中黄铁矿的微量元素、稀土元素地球化学分析表明:拉拉铜矿经历了早期火山喷发成岩成矿和晚期变质成岩成矿作用.条带状矿石中的黄铁矿Co/Ni比值集中于4.92～79.2之间,落入火山成因黄铁矿区,稀土元素分布具有Eu正异常和轻稀土富集的特征,反映矿床具有伴随河口群火山喷流沉积成岩过程的同生沉积成矿作用.脉状矿石中的黄铁矿Co/Ni比值集中于1.10～3.45,落在热液成因黄铁矿区,稀土元素较河口群岩石及其他典型块状硫化物矿床矿石稀土元素更加富集轻稀土元素,稀土含量变化范围更大,显著的负Eu异常,则又说明,矿床形成的主要成矿作用是伴随新元古代晋宁运动而发生的大规模的变质作用.  相似文献   

长江中下游湖泊沉积物铅污染记录——以洪湖、固城湖和太湖为例   总被引：13，自引：8，他引：5       下载免费PDF全文

姚书春  薛滨  朱育新  夏威岚  李世杰 《第四纪研究》2008,28(4):659-666

2002～2005年在长江中下游的洪湖、固城湖和太湖分别采集了沉积物柱样钻孔,测定了总有机碳（TOC）和金属元素包括Pb,Al,Fe,Ti等,并采用²¹⁰Pb和¹³⁷Cs进行了近代沉积物定年。研究结果表明,洪湖钻孔平均沉积速率为0.15cm/a,固城湖平均沉积速率在0.067cm/a,太湖平均沉积速率为0.35～0.41cm/a。根据湖泊沉积物中铅元素与参考元素（Al,Fe和Ti）浓度和TOC的相关关系建立了回归方程,线性关系极显著（p<0.001）。根据回归方程获取了钻孔中铅的背景值变化,研究表明近代沉积物中金属铅不仅仅来源于自然的作用,而人类活动导致铅的累积发生时间都在20世纪70年代,从一个侧面也说明利用沉积物铅含量变化进行断代存在可能性。对太湖钻孔而言,其污染程度要高于洪湖和固城湖。研究结果表明近30年来洪湖和固城湖人为造成湖泊沉积物铅累积量在不断增加,其沉积物铅污染有进一步加重的趋势,应受到科学家和管理部门的关注。  相似文献   

川西新场气田地气测量试验   总被引：2，自引：0，他引：2  

鲁人齐  王多义  刘亚伟  左银辉  邓美洲  刘应汉 《物探与化探》2008,32(6)

通过对新场气田地气测量分析,发现地气测量的纳米微粒金属元素在新场气田上方有明显的异常显示。综合土壤地球化探结果对比分析,认为Ba、Cd、Cu、Mo、Zn、P、V、Ni等20多种纳米微粒金属元素在新场气田与相同的土壤微量元素都有着共同的响应。同时分析了有机地球化学指标在气田地表上方的表现模式,其特征和地气、土壤元素表现基本一致。地气测量方法在一定条件下对寻找天然气藏、确定气田范围具有一定的应用前景。  相似文献   

Geochemical characteristics and source analysis of inflow of mine water in Wang’ershan Gold Mine, Shandong   总被引：1，自引：0，他引：1  

QIAN Jianping  LI Shuangli  and CAO Chao Guilin University of Technology  Guilin  China 《中国地球化学学报》2008,(1)

Through a systematic observation of water level and temperature, and a comprehensive analysis of the data on major/trace elements, nitrite, hydrogen-oxygen isotopes, the conclusion has been drawn that there are two relatively independent groundwater systems (cool water and hot water), and the geochemical indicators of hot/cool waters are described. The cool water system is relatively enriched in Ca2 , Mg2 and HCO3-. Its TDS is relatively low, about 1400–1800 mg/L. The hot water system is relatively enriched in K , Na , Cl- and SO42-. Its TDS is relatively high, about 2200–2300 mg/L. The cool water system is enriched in Ba, Ga, Cd, and the hot water system is enriched in B, Ti, Cr, Ni, Cu, Mo, Rb, and Cs, relatively. Especially, the contents of Rb and Cs in the hot water system are more than five times as high as those in the cool water system. The NO3- contents of cool water discharged from the gold mine are relatively high, and those of hot water are extremely low. The δD and δ18O values follow an increasing order of surface water>mine cool water>mine hot water. The cool water comes mainly from the lateral supply of phreatic water, while the hot water comes mainly from the vertical supply of deeply circulating structure-fracture water. The ratio of cool water over hot water was estimated to be about 1:1 by a water quality model..  相似文献   

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China’s Coal     

TANG Shuheng  SUN Shenglin  QIN Yong  JIANG Yaof  WANG Wenfeng 《《地质学报》英文版》2008,82(3):722-730

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.  相似文献   

Multifractal Analysis of Element Distribution in Skarn-type Deposits in the Shizishan Orefield, Tongling Area, Anhui Province, China   总被引：3，自引：1，他引：2  

Wang Qingfei  Deng Jun  Wan Li  Zhao Jie  Gong Qingjie  Yang Liqiang  Zhou Lei  Zhang Zhijun 《《地质学报》英文版》2008,82(4):896-905

A series of element concentrations sampled from four drill cores with a length about 1000 m into different skarn-type deposits were selected from the Shizishan orefield, central Tongling, southeastern part of Anhui Province. Using the multifractal method, the distribution and migration characteristics of the major and trace elements are analyzed. The multifractal spectrum of the major elements is left-skewed, whereas the spectrum of the trace elements is right-skewed, which shows that in the process of skarn formation, the trace elements were enriched only locally, and major elements transported within a much larger range. The correlation coefficients of the multifractal parameters Aa （width of the multifractal spectrum） of the four drill cores are relatively low, but the correlation coefficients of the multifractal parameters R （spectrum symmetry parameter） and Af are relatively higher, indicating that although the non-homogeneous intensity of the distribution of elements is inconsistent, their spatial accumulation patterns are almost the same during the ore-forming process. The statistics of the mnltifractal parameters of various elements in the different locations show that the ore-forming processes and element migration pattern in the Shizishan orefield are consistent, and that the migrations of trace elements and major elements exhibit some differences.  相似文献   

内蒙古敖包吐萤石矿床地质和地球化学特征   总被引：2，自引：0，他引：2  

许东青  聂凤军  江思宏  张万益  云飞  杨才  张天俊  吕旭光  林日亮 《地球学报》2008,29(4):440-450

笔者总结了敖包吐萤石矿床的地质特征,并通过萤石的稀土元素的地球化学和Nd同位素研究,探讨了该矿床的成矿作用和成矿物质来源。敖包吐萤石矿床产出于下二叠统大石寨组火山—沉积岩与燕山中期花岗岩的接触带,为单一萤石矿床。萤石矿石的稀土元素的含量(∑REE)变化范围为(8.04～30.04)×10-6,平均为19.42×10-6;轻重稀土LREE/HREE值0.24～0.65,平均0.52;LaN/YbN为0.07～0.62,平均0.26;δEu为0.42～0.90,平均0.60,具Eu负异常和明显重稀土富集的特征。岩矿石的Nd同位素研究表明,萤石矿石的εNd(t)都表现为很大的负值,以成矿主期年龄138Ma计算的εNd(138Ma)为-7.30～-30.55,具有古陆壳的演化特征,暗示其成矿的物质来源主要是壳源物质。在Moller的Tb/La-Tb/Ca成因判别图解中,敖包吐矿床的萤石的结晶作用表现为重新活化的趋势,反映流体具有混源的特征,既有热液成因,又有沉积成因。二叠世的海相火山活动通过海底喷气和喷流的作用形成了初始矿源层,而燕山中期花岗岩浆的侵位与结晶分异,又对初始矿源层的活化和富集提供了流体和热能的来源。成矿流体在经历了长期的演化后在大石寨组的构造薄弱破碎的的部位沉淀析出,形成敖包吐萤石矿床。  相似文献   

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments     

D. Pardo  C. Torres-Verdín  M. Paszynski 《Computational Geosciences》2008,12(1):83-89

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.  相似文献   

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity     

Phillip Joseph Phillips  Mary F. Wheeler 《Computational Geosciences》2008,12(4):417-435

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.  相似文献