地震勘探技术在深部找煤中的应用     

李正越 《中国煤炭地质》2008,(11):67-68

成矿理论与勘探实践证明,东部一些老矿由于勘探深度、范围的限制以及认识上的局限,在矿区深部、周边仍有一些矿未能发现和查明,其中相当一部分仍具有找矿潜力;而寻找西部新的煤炭资源是国家“稳定东部发展西部”战略需要。针对中国东西部不同的地质条件和勘探目标,其地震勘探野外施工方法及资料处理原则有所差异;而资料解释在东部以查明地层赋存形态、煤层赋存范围、构造发育特征为主,西部则以寻找煤系地层波阻抗差异明显、连续性好的反射波组为解释重点。地震勘探技术在中国东西部的二个典型地震时间剖面佐证了其在深部找矿的应用效果。  相似文献   

甘肃大泉水——白沙岘矿区含煤地层及煤层赋存特征     

李玉畅 《中国煤炭地质》2008,(11):9-11

大泉水-白沙岘矿区位于甘肃省景泰县境内,在大地构造位置上处于北祁连加里东褶皱带东段,区内含煤地层为下石炭统靖远组和上石炭统羊虎沟组,属海陆交互相含煤沉积,根据岩性、岩相特征可划分为两个沉积旋回。该矿区主要可采煤层煤．层组赋存于羊虎沟组,厚1．71～9．00m,沿走向由西向东厚度变小,在大泉水井田可采厚度主要分布在V线以西,其东区段只是零星分布且不可采;在白沙岘井田煤层总厚度为2．99～5．15m,厚度变化小,属稳定煤层。煤：层组赋存于靖远组,仅分布在大泉水井田,厚1．33～8．88m,沿走向由西向东呈长透镜体状,西段和中段煤层发育较好．V线以东区段煤层变薄并出现无煤区。  相似文献   

基于GIS组件与ANN耦合技术的矿井构造复杂程度评价     

刘德民  ;张品刚  ;李小明  ;洪益清  ;阎海珠 《中国煤炭地质》2008,(10):74-76

矿井构造是影响煤矿安全生产的主要因素,对瓦斯突出、矿井突水有着明显的控制作用。矿井构造具有空间性和非线性等特点,使矿井构造复杂程度评价的难度较大,据此利用MapObjects的空间分析功能和非线性人工神经网络（ANN）耦合技术,对矿井构造复杂程度进行评价。根据前人的研究成果,将突水系数、底板倾角变异系数、底板标高变异系数、断层强度指数、断层密度等5项指标引入评价体系,经过空间分析统计和模型识别,建立了矿井构造复杂程度评价模型。在开滦矿区东欢矿8煤层构造复杂程度的评价中,共训练及评价了研究区的226个评价单元．评价结果表明研究区西部及西北部构造复杂,中部及东南部构造相对简单。  相似文献   

靖远矿区采煤沉陷区复垦综合评价方法研究   总被引：1，自引：0，他引：1  

刘学成  韩书才 《中国煤炭地质》2008,(8):47-49

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。  相似文献   

Probabilistic seismic hazard evaluation in underground mines     

Ewa GłOwacka 《Natural Hazards》1993,7(2):121-132

Stress concentrations produced by rock deformation due to extraction in underground mines induce seismicity that can take the shape of violent and quite dangerous rockbursts.The hazard evaluation presented in this paper is based on a Bayesian probabilistic synthesis of information determined from mining situations during excavation, with previous and present data from microseismicity and seismoacustics.The method proposed in this study is an example of time-dependent on-line seismic hazard evaluation. All results presented were obtained retrospectiely for different underground coal mines in Poland and Czechoslovakia.On leave from Institute of Geophysics, Polish Academy of Sciences 01-452 Warszawa, ul. Ksiecia Janusza 64, Poland.  相似文献   

“煤特征指数”与矿井瓦斯危险类型的关系     

张世平 《煤田地质与勘探》1992,20(6):36-39

矿井瓦斯危险程度与煤层中瓦斯赋存状况及其泄出方式有关,并取决于多种地质条件和采掘工艺。其中,煤特征条件特别重要。本文分析了湖南省的5种矿井瓦斯危险类型以及相应的煤特征条件,提出了“煤特征指数(I_c)”这一概念。I_c是一项评价矿井瓦斯危险程度的综合指标。研究表明,矿井瓦斯危险愈严重,则其I_c值愈高。应用该项成果预测了16对矿井的瓦斯危险类型,取得了满意的效果。  相似文献   

Acid leaching of ash and coal: Time dependence and trace element occurrences     

Mehtap Paul  Meryem Seferinoğlu  Gul Asiye Ayçık  Åke Sandström  Michael L. Smith  Jan Paul 《International Journal of Mineral Processing》2006

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.  相似文献   

Environmental aspects of selected trace metals in soils and waters surrounding Singaran Nala, Raniganj Coalfield     

Supriyo Das 《中国地球化学学报》2006,25(B08):24-25

The Raniganj Coalfield is the oldest coalfield in India that has been continuously and extensively mined since the late eighteenth century. The present study reports a geochemical investigation and environmental quality assessment using soil and water in the area surrounding a stream, locally known as Singaran Nala （Nala means storm water drains in Bengali）, in the Raniganj Coalfield. Soil （top soil, mud, silty clay and laterite） and rock samples （sandstone and shale） were collected from the study area and were analyzed for trace metals （Cr, Cu, Fe, Mn, Ni and Zn）. Surface waters from the stream and the Damodar River as well as ground waters from hand pumps and underground mine pits were collected. Water samples were analyzed for major ions （Na^＋, Ca^2＋, Mg^2＋, Cl^-, HNO3^- and SO4^2-） and trace metals （Cu, Fe, Mn, Ni, and Zn）. Trace metal concentrations in soil samples are found higher than the average world soil composition. Nevertheless, trace metal （Cr, Cu, Ni and Zn） concentrations in soils exceed or reach the maximum allowable concentrations （MAC） proposed by the European Commission for agricultural soils. In particular, Ni concentrations exceed the typical value for cultivated soils. Chromium, Cu and Ni concentrations in laterite and Cr concentration in topsoil exceed the ecotoxicological limit.  相似文献   

Increasing of efficiency of desulphurisation processes of coals during thermal destruction     

Turchanina Oksana Satin Vladimir Derevyanko Aleksey 《中国地球化学学报》2006,25(B08):51-52

As is well known, a high content of sulphur in coals is an effect of the post-depositional history of coal seams and one of the most important criteria of its use as a fuel. Sulphur in coals can cause a serious environmental and technological problem during their utilization. This problem is very actual for the Donetsk Basin because 734 mined seams out of the total of 1009 （73%） are comprised of coals with sulphur content -2%. The chemical pre-treatment as a first stage in their processing is widely used in order to effectively obtain the thermal destruction products of coals （such as semi-coke, coke, adsorbents, etc.） and to simultaneously utilize coal wastes. Development in pre-treatment methods for high-sulphur, low-rank coals is especially desirable for reducing the sulphur contents of the solid products. The aim of the present work is to investigate the influence of coal pre-treatment on the yield and composition of thermal destruction products, and the sulphur distribution among different components of the coals of different genetic types by reductivity （low-reduced LRC and reduced RC coals）. The thermal behavior of the coals was studied by means of the Fisher method （heated to 520℃, at a rate of 7℃/min）. The composition of the semi-coking gas was investigated by means of a VTI gas analyzer. The coal samples were chemically treated directly before thermal destruction by the introduction of 1-% solutions of radical polymerization initiator AAD （acrylic acid dinitrile C8H12N4） and products of coal-tar distillation （absorber oil）. Coal pre-treatment increases the semi-coke yield and its coking ability, and changes the liquid/gaseous product ratio.  相似文献   

Determination of potential hazardous elements in Can coals （Canakkale- Turkey）-I     

Gulbin Gurdal Alper Baba 《中国地球化学学报》2006,25(B08):52-53

It is known that the increasing use of coal as an energy source led to the growing environmental and health problems. But comprehensive knowledge of coal quality parameters may help to reduce some of these problems. The Canakkale-Can coalfield is located in the western part of Turkey, whose reserves are estimated at 69.3 billion tons, mainly used in the industry in the neighboring areas, specifically for the Can Thermal Power Plant. The aim of this study is to determine the coal quality parameters and examine the origin and distributions of potentially toxic trace elements in lignite which may produce environmental and health hazards in the area. The coal samples were collected from different parts of the coalfield in Can. Proximate and ultimate analyses, sulfur form analyses, X-ray powder diffraction （XRD）, inductively coupled plasma-mass spectrometry （ICP-MS）, and scanning electron microscopy （SEM） were performed on those samples to determine the geochemical profile of hazardous elements.  相似文献