Oil and gas resource assessment: The linkage between geological analysis and discovery process model results     

Lawrence J. Drew  John H. Schuenemeyer 《Natural Resources Research》1996,5(1):33-42

Two widely-used techniques to estimate the volume of remaining oil and gas resources are discovery process modeling and geologic assessment. Both were used in a recent national assessment of oil and gas resources of the United States. Parallel estimates were obtained for 27 provinces. Geological-based estimates can typically see into areas not available to discovery process models (that is areas with little or no exploration history) and thus, on average, yield higher estimates. However, a linear relation does exist between the mean estimates obtained from these two methods. In addition, other variables were found in a multiple regression model that explained much of the difference. Thus, it is possible to perform discovery process modeling and adjust the estimates to yield results that might be expected from geological-based assessments.  相似文献   

Rupture process of large earthquakes in the northern Mexico subduction zone     

Larry J. Ruff  Angus D. Miller 《Pure and Applied Geophysics》1994,142(1):101-172

The Cocos plate subducts beneath North America at the Mexico trench. The northernmost segment of this trench, between the Orozco and Rivera fracture zones, has ruptured in a sequence of five large earthquakes from 1973 to 1985; the Jan. 30, 1973 Colima event (M _s 7.5) at the northern end of the segment near Rivera fracture zone; the Mar. 14, 1979 Petatlan event (M _s 7.6) at the southern end of the segment on the Orozco fracture zone; the Oct. 25, 1981 Playa Azul event (M _s 7.3) in the middle of the Michoacan gap; the Sept. 19, 1985 Michoacan mainshock (M _s 8.1); and the Sept. 21, 1985 Michoacan aftershock (M _s 7.6) that reruptured part of the Petatlan zone. Body wave inversion for the rupture process of these earthquakes finds the best: earthquake depth; focal mechanism; overall source time function; and seismic moment, for each earthquake. In addition, we have determined spatial concentrations of seismic moment release for the Colima earthquake, and the Michoacan mainshock and aftershock. These spatial concentrations of slip are interpreted as asperities; and the resultant asperity distribution for Mexico is compared to other subduction zones. The body wave inversion technique also determines theMoment Tensor Rate Functions; but there is no evidence for statistically significant changes in the moment tensor during rupture for any of the five earthquakes. An appendix describes theMoment Tensor Rate Functions methodology in detail.The systematic bias between global and regional determinations of epicentral locations in Mexico must be resolved to enable plotting of asperities with aftershocks and geographic features. We have spatially shifted all of our results to regional determinations of epicenters. The best point source depths for the five earthquakes are all above 30 km, consistent with the idea that the down-dip edge of the seismogenic plate interface in Mexico is shallow compared to other subduction zones. Consideration of uncertainties in the focal mechanisms allows us to state that all five earthquakes occurred on fault planes with the same strike (N65°W to N70°W) and dip (15±3°), except for the smaller Playa Azul event at the down-dip edge which has a steeper dip angle of 20 to 25°. However, the Petatlan earthquake does prefer a fault plane that is rotated to a more east-west orientation—one explanation may be that this earthquake is located near the crest of the subducting Orozco fracture zone. The slip vectors of all five earthquakes are similar and generally consistent with the NUVEL-predicted Cocos-North America convergence direction of N33°E for this segment. The most important deviation is the more northerly slip direction for the Petatlan earthquake. Also, the slip vectors from the Harvard CMT solutions for large and small events in this segment prefer an overall convergence direction of about N20°E to N25°E.All five earthquakes share a common feature in the rupture process: each earthquake has a small initial precursory arrival followed by a large pulse of moment release with a distinct onset. The delay time varies from 4 s for the Playa Azul event to 8 s for the Colima event. While there is some evidence of spatial concentration of moment release for each event, our overall asperity distribution for the northern Mexico segment consists of one clear asperity, in the epicentral region of the 1973 Colima earthquake, and then a scattering of diffuse and overlapping regions of high moment release for the remainder of the segment. This character is directly displayed in the overlapping of rupture zones between the 1979 Petatlan event and the 1985 Michoacan aftershock. This character of the asperity distribution is in contrast to the widely spaced distinct asperities in the northern Japan-Kuriles Islands subduction zone, but is somewhat similar to the asperity distributions found in the central Peru and Santa Cruz Islands subduction zones. Subduction of the Orozco fracture zone may strongly affect the seismogenic character as the overlapping rupture zones are located on the crest of the subducted fracture zone. There is also a distinct change in the physiography of the upper plate that coincides with the subducting fracture zone, and the Guerrero seismic gap to the south of the Petatlan earthquake is in the wake of the Orozco fracture zone. At the northern end, the Rivera fracture zone in the subducting plate and the Colima graben in the upper plate coincide with the northernmost extent of the Colima rupture zone.  相似文献   

Palaeoclimatic studies in South Shetland Islands,Antarctica, based on numerous stratigraphic variables in lake sediments     

Svante Björck  Hannelore Håkansson  Siv Olsson  Lena Barnekow  Jan Janssens 《Journal of Paleolimnology》1993,8(3):233-272

The hitherto longest found lake sediment sequence on Byers Peninsula, Livingston Island, South Shetland Islands, was analysed with respect to lithology, chronology, diatoms, Pediastrum, pollen and spores, mosses, mineralogy, and sediment chemistry. During the ca. 5000 year long development the sediments were influenced by frequent tephra fall-outs. This volcanic impact played a major role in the lake's history during two periods, 4700–4600 and 2800–2500 BP, but was of importance during the lake's entire history with considerable influence on many of the palaeoenvironmentally significant indicators. The large and complex data set was analysed and zonated with different types of multivariate analysis. This resulted in a subdivision of the sequence into 8 time periods and 21 variables. Redundancy analysis (RDA) of this data set, both without and with the tephra periods, and with 4–6 of the variables as explanatory environmental variables, reveal that climatic/environmental signals are detectable. The palaeoclimatic picture that emerged out of the tephra noise suggests that the first 100 years were characterized by mild, humid conditions. This was followed by a less mild and humid climate until ca. 4000 BP when a gradual warming seems to have started, coupled with increased humidity. These mild and humid conditions seem to have reached an optimum slightly after 3000 BP. At ca. 2500 BP a distinct climatic deterioration occurred with colder and drier conditions and long seasons with ice cover. This arid, cold phase probably reached its optimum conditions at ca. 1500 BP, when slightly warmer conditions might have prevailed for a while. Except for the modern sample with rather mild climate, the last 1400 years seem to have been fairly arid and cold, and the effects of the frequent volcanic activity during this period is only vaguely seen in the records.  相似文献   

钾霞石制备体系碱性滤液的利用技术     

路华龙  霍光祥  段永华  勾明雷  刘军娜  刘晨 《岩石矿物学杂志》2024,43(1):125-130

为处理钾长石水热制备钾霞石所产生的碱性滤液,本文采用水热法,考察了氢氧化铝溶解时间、晶化时间、晶化温度、水碱比对钾霞石产率和白度的影响,并对合成钾霞石物相进行了表征。结果表明,合成钾霞石的最佳条件为,氢氧化铝溶解时间为1.5 h,晶化时间为4 h,晶化温度280℃,水碱比为1.8。XRD结果表明,产物为钾霞石粉体。傅里叶变换红外光谱表明,Al(OH)₃中的Al在水热条件下进入到Si—O骨架中形成了Si—O—Al官能团,从而印证了钾霞石的合成。差热分析结果表明,合成钾霞石具有良好的热稳定性。氮气吸附结果表明,合成钾霞石比表面积为5.18 m²/g,平均孔径为32.98 nm。实现了钾长石水热制备钾霞石所剩碱性滤液的资源化利用,并为钾长石水热制备钾霞石提供了一种母液循环的思路,使水热制备钾霞石工业化成为一种可能。  相似文献   

鄂北一次超级对流单体的双偏振雷达特征分析     

贺晓露  杨涛  李格  郝元甲  姜伟男  秦幼文 《气象科技》2021,49(6):913-922

利用湖北省随州市S波段双偏振雷达资料及常规观测资料，对2020年5月4日鄂北随州出现的超级单体风暴进行分析。结果发现：①在有利天气背景作用下，形成了上干冷下暖湿的垂直层结、0~6 km中等强度垂直风切变以及地面辐合线，为强风暴的发生发展提供环境条件和触发条件。②超级单体发展过程中，观测到前侧“V”形入流缺口、中气旋、弱回波穹隆、悬垂回波、钩状回波等特征，且风暴顶高度、风暴质心高度、最大水平反射率因子高度以及垂直累积液态含水量等风暴参数均呈先升后降趋势。③超级单体的发展和成熟阶段，在0 ℃层以下的低层，于前侧下沉气流西侧的水平反射率因子大梯度区观测到浅薄的差分反射率因子Zdr大值区，即Zdr弧；④超级单体的初始阶段、发展阶段以及成熟阶段，在0 ℃层之上的中层，观测到强上升气流的正温度扰动使冰相粒子在附近融化而形成的Zdr环形大值区和相关系数环形小值区。⑤垂直方向上，在超级单体的初始阶段、发展阶段以及成熟阶段均观测到Zdr柱和差分相位常数Kdp柱。Zdr柱与弱回波穹隆区位置对应较好，其不同时期特征反映了上升气流强的变化；Kdp柱的变化反映了超级单体中含有大量液态水滴区域的变化。  相似文献   

Research on temporal and spatial distribution, evolutionary character and mechanism of crustal deformation field before and after the Tangshan earthquake   总被引：2，自引：0，他引：2  

周硕愚  施顺英  帅平 《地震学报(英文版)》1997,10(6):693-701

Ｒｅｓｅａｒｃｈｏｎｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｄｉｓｔｒｉｂｕ┐ｔｉｏｎ,ｅｖｏｌｕｔｉｏｎａｒｙｃｈａｒａｃｔｅｒａｎｄｍｅｃｈａｎｉｓｍｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｂｅｆｏｒｅａｎｄａｆｔｅｒｔｈｅＴａｎｇｓｈａｎ...  相似文献   

硫铅酸盐“S”型瞬凝水泥干法护壁堵漏技术研究          下载免费PDF全文

彭振斌 《探矿工程》1995,(2):41-42,60

介绍了硫铝酸盐“Ｓ”型瞬凝水泥干法者漏时使用的配方,阐述了输送工具和扫孔钻具的设计以及灌注工艺技术。  相似文献   

MODERNIZATION PROCESS IN HISTORICAL ASIAN CITIES AND THEIR CHARACTERISTICS: A COMPARATIVE STUDY ON SEOUL, TOKYO AND BEIJING     

Li Wenyan 《地理学报(英文版)》1995,(2)

Thspaperwaspresatedatthe"94SeoulIntemationalSyInPosiumonCityandffistory"heldonOCtober27to28,l994andthenpublishedinTheJoumaIofSeouIShndesVo.IV.Thepresentvisionhasbeenslighlyrevised.Bejing,SeoulandTokyoarecapitalsofthreeneighbouringcoUnnesinNortheastAsia,wh…  相似文献   

中国大陆第四纪地壳运动时程   总被引：5，自引：0，他引：5  

冯希杰 《地质论评》1992,38(3):210-214

本文从中国大陆有代表性的青藏高原、黄土高原、三峡地区着手,进行了新构造运动剖析。并结合全国火山活动期次,总结出中国大陆第四纪地壳运动的时程变化。从而为进一步探讨新构造运动特点和规律,为国民经济建设及人类生存环境提供了一定的地质背景资料。  相似文献   

膜分离技术的应用及发展趋势   总被引：8，自引：0，他引：8  

岳志新  马东祝  赵丽娜  赵寒梅 《云南地理环境研究》2006,18(5):52-57

综述世界和中国膜分离技术的发展，并对膜分离技术的基本特性、技术特点、膜材料、分类及膜分离装置进行了简单介绍；并介绍了膜分离法在化工及石油工业、食品工业、医药工业和医疗设备、生物技术和环境工程中的应用，并分析了膜分离技术将会在膜材料、新的膜过程和集成膜过程3个方面的发展趋势。同时指出如果能解决膜产品的价格、膜污染和膜分离性能的提高这3个膜的制约因素，膜分离技术将在人类社会的发展史上起到不可替代的作用。  相似文献