岩石临破裂前波速变化特征的实验研究   总被引：1，自引：0，他引：1       下载免费PDF全文

施行觉  赵闯  杨映希  温丹  李成波 《地球物理学报》2012,55(10):3386-3392

为了提高波速的测量精度以便能观测到岩石临破裂前波速的微小变化,采用了波形的数值化,波的叠加,波的互相关和DTE(Subsample delay time estimate)方法和cosine插值,使时间分辨率提高到0.001 μs,波速分辨率达到1 m/s.在较小的应力增量(0.17 MPa)下测量了波的延迟时间,进而得到速度随应力的变化规律.实验结果显示在0.98破裂强度时岩石波速最大,然后下降直到破裂,此期间的波速下降量约30m/s.同时对临破裂前波的主频能量进行了计算,其变化规律与波速相同,认为破裂前的有关变化与岩石膨胀有关.最后用涨落模型讨论了延迟时间的方差变化.  相似文献   

Analysis of implicit HHT‐α integration algorithm for real‐time hybrid simulation     

Cheng Chen  James M. Ricles 《地震工程与结构动力学》2012,41(5):1021-1041

Real‐time hybrid simulation is a viable experiment technique to evaluate the performance of structures equipped with rate‐dependent seismic devices when subject to dynamic loading. The integration algorithm used to solve the equations of motion has to be stable and accurate to achieve a successful real‐time hybrid simulation. The implicit HHT α‐algorithm is a popular integration algorithm for conducting structural dynamic time history analysis because of its desirable properties of unconditional stability for linear elastic structures and controllable numerical damping for high frequencies. The implicit form of the algorithm, however, requires iterations for nonlinear structures, which is undesirable for real‐time hybrid simulation. Consequently, the HHT α‐algorithm has been implemented for real‐time hybrid simulation using a fixed number of substep iterations. The resulting HHT α‐algorithm with a fixed number of substep iterations is believed to be unconditionally stable for linear elastic structures, but research on its stability and accuracy for nonlinear structures is quite limited. In this paper, a discrete transfer function approach is utilized to analyze the HHT α‐algorithm with a fixed number of substep iterations. The algorithm is shown to be unconditionally stable for linear elastic structures, but only conditionally stable for nonlinear softening or hardening structures. The equivalent damping of the algorithm is shown to be almost the same as that of the original HHT α‐algorithm, while the period elongation varies depending on the structural nonlinearity and the size of the integration time‐step. A modified form of the algorithm is proposed to improve its stability for use in nonlinear structures. The stability of the modified algorithm is demonstrated to be enhanced and have an accuracy that is comparable to that of the existing HHT α‐algorithm with a fixed number of substep iterations. Both numerical and real‐time hybrid simulations are conducted to verify the modified algorithm. The experimental results demonstrate the effectiveness of the modified algorithm for real‐time testing. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Testing bedload transport equations with consideration of time scales     

Alain Recking  Frédéric Liébault  Thomas Jolimet 《地球表面变化过程与地形》2012,37(7):774-789

Bedload transport is known to be a highly fluctuating temporal phenomenon, even under constant (mean) flow conditions, as a consequence of stochasticity, bedform migration, grain sorting, hysteresis, or sediment supply limitation. Because bedload transport formulas usually refer to a single mean transport value for a given flow condition, one can expect that prediction accuracy (when compared to measurements) will depend on the amplitude and duration of fluctuations, which in turn depend on the time scale used for observations. This paper aims to identify how the time scale considered can affect bedload prediction. This was done by testing 16 common bedload transport formulas with four data sets corresponding to different measurement period durations: (i) highly fluctuating (quasi‐)instantaneous field measurements; (ii) volumes accumulated at the event scale on two small alpine gravel‐bed rivers, potentially affected by seasonal fluctuations; (iii) volumes accumulated at the interannual scale in a meandering gravel bed river, thought to be weakly subject to fluctuations; (iv) time‐integrated flume measurements with nearly uniform sediments. The tests confirmed that the longer the measurement period, the better the precision of the formula's prediction interval. They also demonstrate several consequential limitations. Most threshold formulas are no longer valid when the flow condition is below two times the threshold condition for the largest elements' motion on the bed surface (considering D₈₄). In such conditions, equations either predict zero transport, or largely overestimate the real transport, especially when D₈₄ is high. There is a need for new sediment data collected with highly reliable techniques such as recording slot bedload samplers to further investigate this topic. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

The response of saltation to wind speed fluctuations   总被引：2，自引：0，他引：2  

Sascha Pfeifer  Hans‐Jürgen Schönfeldt 《地球表面变化过程与地形》2012,37(10):1056-1064

The response time of saltation to spatial or temporal wind speed fluctuations constitutes an important control parameter for aeolian sediment transport and deposition. In this paper, we present direct measurements of the response time obtained from several field experiments. The sand transport was studied using six small microphones arranged in a vertical profile and collocated with a sonic anemometer, a webcam and a cup anemometer tower. The webcam was coupled with the sonic anemometer via a personal computer and provides information on creeping and saltating grains with a sampling rate of 10 Hz. Sediment transport measurements were obtained over four periods. The Wiener filter, a signal processing technique, is used to obtain a discrete transfer function that relates the horizontal wind speed and the non‐intermittent sand transport. The transfer function can be established using an exponential function with a time constant or characteristic response time τ without time shift. The response time fluctuated between zero and 1·5 seconds depending on the turbulence intensity, the saltation activity, the measuring height and sampling rates. The Wiener filter coefficients suggest that the response of saltation to wind speed alterations is determined by more than one process. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

地震分析软件震相走时表文件结构研究     

李万金 《地震研究》2012,35(2):288-294,296

通过对现有地震分析软件所配置的震相走时表文件的结构类型及优劣进行分析,将震相走时表分为4种组合结构并分析其实用性。在IASPEI91震相走时表文件结构的基础上进行修改、补充和完善,从而提出了一种安全性高、适用面广、灵活性强、能存储各种结构走时表的新型走时表文件结构。应用这种新型结构震相走时表,地震分析软件可以灵活配置不同的走时表,实现精细定位,并为数字化测震台网快速利用测震资料编制和应用高精度的区域震相走时表创造了条件,对于地球深部构造研究具有一定的促进意义。  相似文献   

天津王4井抽水观测水汞影响因素的探讨     

马建英  刘学领  杨柳  刘文兵  邵永新  曹井泉 《华北地震科学》2012,(3):45-47

王4井因受井区地热开发的影响,于2008年12月断流停测。2010年对原观测井口装置进行改造,开始进行抽水观测水汞试验研究。在新的观测方式下,为确保观测数据稳定、可靠,本文从抽水观测的观测条件方面,对不同取样位置和抽水时间对水汞测值的影响进行了试验。试验结果表明,不同抽水时间和不同取样位置抽水观测对水汞测值影响不大,这一结论与水汞本身的化学特性相一致。认为在没有自流井的地区,只要选择灵敏的观测点使用抽水方式采样,固定观测条件,依然可以进行水汞监测。  相似文献   

近震信号检测参数设置研究     

石玉燕  刘希强  颜启  穆娟  崔鑫  周彦文 《地震地磁观测与研究》2012,33(1):53-56

地震信号检测是进行各种地震数据分析和处理的首要任务,STA/LTA方法具有算法简单、便于实时处理等特点,被广泛应用于地震信号检测.结合实际震例数据研究STA/LTA方法进行地震信号检测的各种影响因素,得到该方法进行检测时最合理的参数设置范围.  相似文献   

利用地震复发周期考察汶川8．0级地震前兆异常     

李卫平  冯蔚  管见  王科英  明跃红 《地震地磁观测与研究》2012,33(5):75-78

通过对汶川Ms8．0地震复发周期的时间和空间进行扫描,发现地震发生前,在时间上和空间上,地震复发周期均出现低值异常。因此,对地震发生的时间和地区进行异常判断,地震复发周期是一个可以参考利用的指标。  相似文献   

圆形空心钢管混凝土柱的耐火性能实验研究     

查晓雄  余敏  刘轶翔 《地震学刊》2012,(1):66-70

关于实心钢管混凝土的耐火性能已有大量的实验研究,而空心钢管混凝土的耐火实验目前还非常少见。针对这一不足,对空心钢管混凝土进行了耐火实验研究,其中考虑了不同的空心率,并对中空注水对构件耐火性能的影响也进行了实验研究。实验结果表明：在相同的荷栽比下,构件的耐火时间随空心率先增大后减小。当空心率较小时,中空注水对构件耐火时间的提高作用不明显;当空心率较大时,注水对耐火时间的提高才体现出来。  相似文献   

天然地震折射与反射速度CT的模型实验     

陈立成  唐棠  吴发恩  王立春  冯国臣 《CT理论与应用研究》2012,21(1):19-26

为提高天然地震折射与反射速度CT的精度,我们运用＂走时最小纵横波速度层析成像＂与＂波形基本解纵横波速度层析成像＂相结合的方法,反演各层界面形状及各层纵波、横波速度。反演结果图与＂正演地球模型剖面图＂基本一致。本文在数学上发展了＂层析成像＂的内容,提出＂波形基本解纵横波速度层析成像＂基本概念,是天然地震简单模型实验的初步...  相似文献