Response of saturated and nearly saturated porous media: Different formulations and their applicability     

M. B. C. Ulker  M. S. Rahman 《国际地质力学数值与分析法杂志》2009,33(5):633-664

The response of saturated porous medium is of significant interest in many fields ranging from geomechanics to biomechanics. Biot was the first to formulate the basic equations governing the process of coupled flow and deformation in porous media. Depending on the nature of loading vis‐à‐vis the characteristics of the media, different formulations (fully dynamic, partly dynamic, quasi‐static) are possible. In this study, analytical solutions are developed for the response of saturated and nearly saturated porous media under plane strain condition. The solutions for different formulations are developed in terms of non‐dimensional parameters. The response is studied for various conditions and the regions of validity for various formulations are identified in a parametric space. An assessment of the needed formulation for few important problems is also presented. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

复杂应力条件下长江口原状饱和软黏土门槛循环应力比试验研究     

刘功勋  栾茂田  郭莹  王忠涛  贺林  张俊峰 《岩土力学》2010,31(4):1123-1129

针对取自于长江口的海洋原状饱和软黏土,利用土工静力-动力液压三轴-扭转多功能剪切仪,在控制不同初始固结参数的三向非均等固结状态和不排水条件下,分别进行了轴向和扭转双向耦合循环剪切以及循环扭剪等多种复杂循环剪切试验。分别研究了初始大主应力方向角、初始偏应力比、初始中主应力系数以及循环剪切应力模式等因素对门槛循环应力比的影响。试验结果表明,在三向非均等固结条件下,初始大主应力方向角、初始偏应力比对门槛循环应力比影响显著,门槛循环应力比随着初始大主应力方向角与初始偏应力比的增大而明显减小;而初始中主应力系数对门槛循环应力比基本没有影响。循环剪切应力模式对门槛循环应力比具有显著影响,在相同的初始固结应力条件下,循环耦合剪切试验确定的门槛循环应力比明显小于循环扭剪试验所确定的门槛循环应力比。  相似文献   

鄂尔多斯盆地西南缘奥陶系马家沟组烃源岩饱和烃特征研究   总被引：1，自引：0，他引：1  

高占冬  张中宁  郑建京 《矿物岩石地球化学通报》2014,33(6)

奥陶系马家沟组是鄂尔多斯盆地下古生界的烃源岩层系之一,为了进一步认识马家沟组烃源岩的地球化学特征,本文以鄂尔多斯盆地西南缘典型剖面烃源岩样品为研究对象,利用GC-MS分析方法对研究样品的饱和烃馏分进行了分析。研究表明鄂尔多斯盆地西南缘马家沟组烃源岩岩性不同,其生物标志化合物分布特征也存在差异。根据生物标志化合物特征推断,马家沟组各类源岩的沉积环境为盐度较高的还原环境,灰岩沉积环境的氧化性略高于灰质泥岩;灰岩的有机质母质来源以低等水生生物和微生物为主,而灰质泥岩有高等植物来源的有机质混入,有机质的热演化程度均达到成熟阶段;马家沟组各类源岩有机质均经历过降解作用,且碳质泥岩中有机质遭受的降解作用要强于灰岩。  相似文献   

An iterative pressure‐stabilized fractional step algorithm in saturated soil dynamics     

Xikui Li  Xue Zhang  Xianhong Han  D. C. Sheng 《国际地质力学数值与分析法杂志》2010,34(7):733-753

This paper presents an iterative, incremental pressure‐stabilized fractional step algorithm for coupled hydro‐mechanical problems with mixed formulations of the displacement–pressure ( u –p) model in saturated soil dynamics that allows the use of finite elements with equal low order of interpolation approximation of u and p. In comparison with the original fractional step algorithm, the distinct features of the proposed algorithm lie in its enhanced stability owing to the introduction of both an iteration procedure and a finite increment calculus (FIC) process into the algorithm. The introduction of the iterative procedure makes the velocity term satisfy the momentum conservation equation in an implicit sense and allows much larger time step sizes to be used than those limited in existing explicit and semi‐implicit versions of the algorithm. The introduction of the FIC process removes the dependence of the stability of the proposed algorithm on the time step size, as a result it allows to using the incremental version of the algorithm and evades the minimum time step size requirement presented in the existing versions of the fractional step algorithm that restricts the application of the algorithm to saturated soil dynamics problems with high frequencies. Numerical experiments demonstrate the effectiveness and improved performance of the proposed iterative pressure‐stabilized fractional step algorithm. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Soil water movement under a bottomland hedgerow during contrasting meteorological conditions     

R. Ghazavi  Z. Thomas  Y. Hamon  Ph. Merot 《水文研究》2011,25(9):1431-1442

  相似文献   

Factor of safety in a partially saturated slope inferred from hydro‐mechanical continuum modeling     

Ronaldo I. Borja  Joshua A. White  Xiaoyu Liu  Wei Wu 《国际地质力学数值与分析法杂志》2012,36(2):236-248

Rainfall weakens an earth slope and triggers mass movement. Relevant triggering mechanisms are complex and include reduction of capillary pressure due to increased saturation and frictional drag on the sediment induced by fluid flow. Physics‐based continuum models utilizing modern computational tools are useful for understanding the mechanisms of deformation in partially saturated slopes; however, they do not provide a scalar indicator called ‘factor of safety’ that measures the potential of a given slope for mass movement. In the present work, we employ sequential calculations consisting of a physics‐based finite element model that couples solid deformation with fluid flow to quantify the stress and deformation fields in a steep hillside slope subjected to rainfall infiltration. This is followed by a limit‐equilibrium calculation based on the method of slices that evaluates the desired factor of safety. The field condition investigated is similar to the steep experimental catchment CB1 near Coos Bay, Oregon, which failed as a large debris flow from heavy rainfall. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

The soil hydrologic response to forest regrowth: a case study from southwestern Amazonia     

Sarah Godsey  Helmut Elsenbeer 《水文研究》2002,16(7):1519-1522

As a large and dynamic land‐use category, tropical secondary forests may affect climate, soils, and hydrology in a manner different from primary forests or agricultural areas. We investigated the saturated hydraulic conductivity K_sat of a Kandiudult under different land uses in Rondonia, Brazil. We measured K_sat at four depths (12·5, 20, 30 and 50 cm) under (a) primary forest, (b) a former banana–cacao plantation (SF1), and (c) an abandoned pasture (SF2). At 12·5 cm, all three land uses differ significantly (α = 0·1), but not at the 20 and 30 cm depths. At 50 cm, K_sat was significantly greater in the former pasture than in other land uses. Lateral subsurface flow is expected during intense rainfall (about 30 times per year) at 30 cm depth in SF1 and at 50 cm depth in the forest, whereas the relatively low permeability at shallow 12·5 cm in the SF2 may result not only in lateral subsurface flow, but also saturation overland flow. For modelling purposes, recovering systems seem to have K_sat values distinct from primary forest at shallow depths, whereas at deeper layers (>20 cm) they may be considered similar to forests. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Extension of the Griffith's fracture criteria to saturated clays     

K.M. Dgu  M. Souli  B. Ladanyi 《国际地质力学数值与分析法杂志》2003,27(4):275-288

Inglis [1] has solved the problem of distribution of stress in an elastic plate around an elliptical hole. His works clarify the role of cracks in the failure of an elastic material. However, his solution cannot be applied to saturated clay because he considers only total stresses, while, in saturated clay, the criterion of rupture should be expressed in terms of effective and not total stresses. The solution of Atkinson and Craster [2] using Biot's poroelasticity theory, shows that there is no high pore pressure in the vicinity of the crack tips for saturated clay. The major difference between this approach and the Biot's theory of is that, in saturated clay, strain is a function of the variation of the effective stress [3], while, in poroelastic media, strain is only a function of the variation of the total stress [4, Equation 2.2]. Also in their solution there is continuity between the pore fluid and the inner fluid in the crack. Their solution is valid for poroelastic media involving a movement of the pore fluid. In our solution there is no movement of the pore fluid (Undrained condition). In this paper we have solved the same problem as Inglis [1], but for the particular case of saturated clay obeying elastic law. By solving this problem we obtained the expressions for pore pressure, effective stress, total stress and displacements. The results show that not only the total stress but also the pore pressure and the effective stress are also high in the vicinity of the crack tips. A new failure criterion, based on Griffith's strain energy principle [5] and maximum tensile stress [6], valid for saturated clay is developed in this paper. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

饱和油藏CO2非混相吞吐增油规律研究——以印尼南苏门答腊盆地典型油藏为例     

程子芸  丁伟  张晓玲  曲良超  代芳文 《地质论评》2023,69(Z1):249-251

  相似文献   

基于OpenSees的砂土本构模型对比研究          下载免费PDF全文

周林禄  苏雷  邱志坚  凌贤长  张安琪 《地震工程学报》2022,44(1):128-135

饱和砂土液化是由地震引起的一种最常见的工程地质现象,也是造成重大地震灾害的主要原因之一。由于成因的复杂性和所造成灾害的严重性,饱和砂土液化一直是土动力学和岩土地震工程研究领域的重要课题。针对饱和砂土液化问题,基于开源地震工程数值计算平台OpenSees,对材料库中的4种砂土本构模型进行数值计算。采用二维u-p单元模拟土颗粒位移和孔隙水压力,分析和对比4种模型在循环动力荷载作用下的加速度、超孔隙水压力、位移、剪应力-剪应变和平均有效应力路径方面的响应结果。研究结果表明:(1)砂土对输入加速度表现出一定的放大效应,对于不同的模型,该放大效应存在一些差异;(2) Stress Density模型在循环动力荷载作用下易产生永久变形;(3)在循环动力荷载作用下,PDMY模型和CycLiqCPSP模型的强度逐渐降低,直到完全消失;(4) Stress Density模型和Manzari Dafalias模型在循环动力荷载下表现出明显的剪胀效应。研究成果对砂土液化的数值模拟问题具有重要的理论价值,可为饱和砂土的液化模拟和砂土本构模型的选取提供参考。  相似文献