中国南方离子吸附型稀土矿床成矿类型及其母岩控矿因素探讨     

付伟  赵芹  罗鹏  李佩强  陆济璞  周辉  易泽邦  许成 《地质学报》2022,96(11):3901-3923

传统认为中国南方的离子吸附型稀土矿床可划分为以“足洞式”为代表的重稀土型和以“河岭式”(或“花山式”)为代表的轻稀土型两种矿化类型。然而，近年来发现的许多矿床(如清溪、寨背和馒头山等)的赋矿风化壳中出现了轻稀土矿与重稀土矿并存现象，表现出特殊的“上轻下重”双层矿体结构。这指示了除重稀土型和轻稀土型之外，还存在着轻重稀土共生型的过渡类型。本研究通过对三种不同成矿类型的若干典型矿床系统对比，指出成矿类型的多样性与母岩性质密切相关，尤其是母岩的稀土元素地球化学和稀土载体矿物属性是制约成矿类型变化的关键因素。统计数据表明，从重稀土型→轻重稀土共生型→轻稀土型，成矿母岩的全岩稀土总量变化不大(ΣREY: 200×10-6~450×10-6→200×10-6~500×10-6→200×10-6~800×10-6)，但轻重稀土配分值出现较显著的区间性差异(ΣLREE/ΣHREY: 02~1→1~5→2~10)。与之同时，母岩中能为离子相稀土提供物源且具有重稀土配分属性的稀土副矿物类型和数量明显减少，这与全岩稀土元素地球化学特征中重稀土分量占比的降低趋势也互相匹配。该结果指示，以往认为重稀土配分母岩形成重稀土矿床、轻稀土配分母岩形成轻稀土矿床的传统观点需要外延，即一部分具有低度轻稀土配分属性(1＜ΣLREE/ΣHREY＜5)且含有丰富易风化稀土副矿物的母岩还可能形成轻重稀土共生型矿床，该认识可为今后离子吸附型稀土矿床勘查工作提供新的找矿依据。  相似文献   

地铁施工对济南白泉泉群流量的影响     

束龙仓  王小博  李虎  倪寒茜  李罡  余亚飞  王鑫  张曼琦 《吉林大学学报(地球科学版)》2021,51(1):192-200

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。  相似文献   

碳中和目标下关键矿产在清洁能源转型中的作用、供需分析及其建议          下载免费PDF全文

王欢  马冰  贾凌霄  于洋  胡嘉修  王为 《中国地质》2021,48(6):1720-1733

在"碳中和"目标的驱动下，全球能源系统向清洁化、低碳化甚至无碳化发展已是大势所趋。针对向清洁能源转型的需求，采用了统计对比、分类汇总、综合分析等方法，分析研究了关键矿产在电池、电网、低碳发电和氢能等行业中的作用和需求。结合当前关键矿产产量的地理集中度高、项目开发周期长、资源质量下降等矿产供应和投资计划不能满足清洁能源转型的需求等问题，提出确保关键矿产多样性供应，推动价值链各环节的技术创新，扩大回收利用，增强供应链弹性和市场透明度，将更高的环境、社会和治理标准纳入主流程及加强生产者和消费者之间的国际合作等建议。  相似文献   

Interactive effects of the type of milling media and CuSO₄ addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability     

Z. Ekmekci  D.J. Bradshaw  P.J. Harris  A.M. Buswell 《International Journal of Mineral Processing》2006

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.  相似文献   

Fluid salinities obtained by infrared microthermometry of opaque minerals: Implications for ore deposit modeling — A note of caution     

Robert Moritz   《Journal of Geochemical Exploration》2006,89(1-3):284

Infrared microthermometry of opaque minerals has revealed that temperatures of phase changes vary with the infrared light source intensity, resulting in an overestimate of fluid salinities and an underestimate of homogenization temperatures. Failing to recognize this analytical artifact during infrared microthermometry may result in meaningless geological models. A fluid inclusion investigation on enargite from a high-sulfidation epithermal deposit is used as an example to document this. Fluid salinities obtained during an early investigation ranged between 6.3 and 20.4 wt.% NaCl, which were interpreted as intense boiling or as evidence for the involvement of a magmatic brine during ore formation. Fluid inclusion salinities obtained with improved analytical settings, i.e. low light intensities, fall between 1.1 and 1.7 wt.% NaCl and are in better agreement with fluid salinities obtained in quartz from similar deposits, and recent modeling suggesting vapor transport of Au and Cu from deep porphyry-Cu environments to shallower high-sulfidation epithermal deposits.  相似文献   

The transition from peraluminous to peralkaline granitic melts: Evidence from melt inclusions and accessory minerals     

R. Thomas  J.D. Webster  D. Rhede  W. Seifert  K. Rickers  H.-J. Frster  W. Heinrich  P. Davidson 《Lithos》2006,91(1-4):137-149

Fractional crystallization of peraluminous F- and H₂O-rich granite magmas progressively enriches the remaining melt with volatiles. We show that, at saturation, the melt may separate into two immiscible conjugate melt fractions, one of the fractions shows increasing peraluminosity and the other increasing peralkalinity. These melt fractions also fractionate the incompatible elements to significantly different degrees. Coexisting melt fractions have differing chemical and physical properties and, due to their high density and viscosity contrasts, they will tend to separate readily from each other. Once separated, each melt fraction evolves independently in response to changing T/P/X conditions and further immiscibility events may occur, each generating its own conjugate pair of melt fractions. The strongly peralkaline melt fractions in particular are very reactive and commonly react until equilibrium is attained. Consequently, the peralkaline melt fraction is commonly preserved only in the isolated melt and mineral inclusions.

We demonstrate that the differences between melt fractions that can be seen most clearly in differing melt inclusion compositions are also visible in the composition of the resulting ore-forming and accessory minerals, and are visible on scales from a few micrometers to hundreds of meters.  相似文献   

Atomistic calculations of structural and elastic properties of serpentine minerals: the case of lizardite   总被引：1，自引：0，他引：1  

A.-L. Auzende  R. J.-M. Pellenq  B. Devouard  A. Baronnet  O. Grauby 《Physics and Chemistry of Minerals》2006,33(4):266-275

The physical properties of the hydrous phyllosilicate lizardite have been investigated by atomistic simulation using the GULP code based on transferable semi-empirical interatomic potentials. Lizardite behavior was first investigated during structure relaxation at room temperature. The Helmholtz free energy is minimum for an equilibrium structure that is in agreement with experiment. The bulk, shear, and Young modulii for lizardite were calculated along with the Poisson ratio. From the shear and bulk modulii, we also calculated translational and longitudinal acoustic wave velocities that are important quantities for tectonophysics models. As expected, lizardite is stiffer in the a direction parallel to the layers than in the c perpendicular direction; the variation of the unit cell parameters with pressure is in good agreement with experiment. The cohesive energy between two successive layers along c direction was calculated at 0.33 eV (i.e., 0.11 eV per OH bond) in good agreement with recent ab initio calculations. Upon pressure and temperature variations, we evidenced that structural changes are mainly pressure induced; pressure being accommodated by a decrease of the c parameter up to 10 GPa. We also found that the change of slope in the derivative of the c cell parameter with respect to pressure occurring around 2 GPa originates from the bending of the interlayer hydroxyl groups with respect to the layer normal direction.  相似文献   

华南下寒武统镍钼矿层中铜铅锌矿物的发现及意义     

陈益平  潘家永  夏菲  郭国林  陈少华  曹双林  严兆斌 《华东地质学院学报》2006,29(1):32-37

华南扬子地块是我国古热水沉积成矿作用最为发育的地区之一,其热水沉积特性最早引起我国学者的关注。华南下寒武统黑色岩系中赋存多个与热水沉积成矿作用相关的大型、超大型重晶石矿床与N i-Mo-U-V多金属富集层。进一步研究分布在华南扬子地块黑色岩系中的金属、非金属矿床成因及其地球化学特征,对认识华南乃至全球晚震旦—早寒武世生物与环境演化有着十分重要的意义。本文对华南下寒武统镍-钼富集层矿石进行电子探针研究,识别出黄铜矿、黝铜矿等铜的独立矿物;闪锌矿等锌的独立矿物;方铅矿、白铅矿等铅的独立矿物。研究表明,在镍-钼矿石中这些矿物的发现为镍-钼矿层是热水沉积作用产物提供了直接的矿物学证据。  相似文献   

新疆巴喀勒萨依地区含铜砂岩及其铜矿床特征     

凌联海  楼法生  刘春根  肖晓林  程春华  于成涛 《华东地质学院学报》2006,29(2):115-120

近年来在新疆巴喀勒萨依地区发现一套含少量火山碎屑岩的含铜砂岩地层,由于该地层位于近东西向的断裂夹块中,其含矿层位的确定就成了难题。在该地层中发现了一些腕足类、珊瑚、腹足类、植物化石,经中国科学院南京地质古生物研究所鉴定,时代属晚石炭世晚期。介绍了巴喀勒萨依地区晚石炭世伊什基里克组含铜砂岩剖面及铜矿特征,并获得铜资源量19 797 t,银铜资源量371 t,提出了该区铜、银富集在红色含铜砂岩中有机质聚集处的新观点。  相似文献   

二维地震观测系统合理性的论证方法     

SUN Xiao-jie LI Chao-lin WANG Li-bin REN Ri-chun LI Hai-yan ZHUANG Yi-ming LIU Ying-xin SUN Ke .Daqing Petroleum Institute  Daqing  Heilongjiang  China .Coalfield Geological  Geophysical Exploration Company of Jilin Province  Changchun  China .Coal Field Geology Bureun of Jilin Province  Changchun  China 《吉林大学学报(地球科学版)》2006,(Z2)

已知勘查区深度范围前提下,最大炮检X和道间距ΔX,不可以太大也不可以太小,施工前能够计算出它的允许值范围。  相似文献