A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Pseudodynamic tests on rubber base isolators with numerical substructuring of the superstructure and strain‐rate effect compensation     

F. J. Molina  G. Verzeletti  G. Magonette  Ph. Buchet  V. Renda  M. Geradin  A. Parducci  M. Mezzi  A. Pacchiarotti  L. Federici  S. Mascelloni 《地震工程与结构动力学》2002,31(8):1563-1582

A pseudodynamic testing procedure has been applied by which the seismic response of a base‐isolated building is obtained by using as specimen the isolators, while the superstructure is numerically simulated. The procedure also takes advantage of the continuous pseudodynamic testing capabilities of the ELSA laboratory, which increase the accuracy of the results and reduce the strain‐rate effect of the rubber bearings. A simple proportional correction of the measured forces compensates the remaining strain‐rate effect due to the unrealistic speed of the test. The correction factor is obtained by means of a characterizing test on the specific rubber isolators. The developed method has been successfully applied to the prediction of the seismic response of a base‐isolated four‐storey building submitted to several specified accelerograms. The results for those earthquakes as well as the effects of some changes of the parameters of the system are discussed. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response     

Norio Hori  Norio Inoue 《地震工程与结构动力学》2002,31(9):1657-1679

Dynamic damaging potential of ground motions must be evaluated by the response behaviour of structures, and it is necessary to indicate what properties of ground motions are most appropriate for evaluation. For that purpose, the behaviour of energy input process and hysteretic energy dissipation are investigated in this study. It is found that the momentary input energy that is an index for the intensity of input energy is related to the characteristics of earthquakes such as cyclic or impulsive, and to the response displacement of structures immediately. On the basis of these results, a procedure is proposed to predict inelastic response displacement of structures by corresponding earthquake input energy to structural dissipated damping and hysteretic energy. In this procedure the earthquake response of structures is recognized as an input and dissipation process of energy, and therefore structural properties and damaging properties of ground motions can be taken into account more generally. Lastly, the studies of the pseudodynamic loading test of reinforced concrete structure specimens subjected to ground motions with different time duration are shown. The purpose of this test is to estimate the damaging properties of ground motions and the accuracy of the proposed prediction procedure. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure     

Bong Yoo  Yang‐Hann Kim 《地震工程与结构动力学》2002,31(10):1777-1792

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究   总被引：26，自引：3，他引：26  

林松柏  林建明  吴季怀  肖春妹 《矿物学报》2002,22(4):299-302

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。  相似文献   

Interpretation of single-well tracer tests using fractional-flow dimensions. Part 1: Theory and mathematical models     

Gerrit van Tonder  Kornelius Riemann  Ingrid Dennis 《Hydrogeology Journal》2002,10(3):351-356

Generalized equations using fractional-flow dimensions were derived to estimate the Darcy and seepage velocities obtained from the point-dilution and the single-well injection-withdrawal field tests conducted in fractured-rock aquifers. Seepage velocities can only be estimated from single-well tests if the hydraulic conductivity and the hydraulic gradient are known a priori. However, if a radial-convergent test is also performed between two boreholes, the kinematic porosity can be estimated and be used to estimate the seepage velocity from the single-well test results. To apply the generalized equations, the flow dimension and the extent of the flow region must be known. Therefore, the generalized radial flow (GRF) model of Barker (1988; a generalized radial flow model for hydraulic tests in fractured rock. Water Resour Res 24(10):1796–1804) is used to estimate the flow dimension because of its wide range of applications. A pumping test performed on the boreholes will yield an estimate of the fractional-flow dimension by applying the GRF model. Electronic Publication  相似文献   

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28   总被引：1，自引：0，他引：1  

Jean S. Kane 《Geostandards and Geoanalytical Research》2002,26(1):7-29

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.  相似文献   

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1   总被引：2，自引：0，他引：2  

Takashi Okai  Atsushi Suzuki  Hodaka Kawahata  Shigeru Terashima  Noboru Imai 《Geostandards and Geoanalytical Research》2002,26(1):95-99

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.  相似文献   

Premier pôle paléomagnétique,d'âge Moscovien contraint par un test du pli,obtenu dans le bassin d'Illizi (Craton saharien,Algérie)First palaeomagnetic pole,of Moscovian age constrained by a fold test,in the Illizi Basin (Saharan Craton,Algeria)     

Boualem Bayou  Mohamed El-Messaoud Derder  Bernard Henry  Hamou Djellit  Mohamed Amenna 《Comptes Rendus Geoscience》2002,334(2):81-87

Palaeomagnetic study, carried out in the Moscovian (～305 Ma) formation in the Edjeleh anticline, shows the existence of three magnetisation components. Two of them are probably Cenozoic and Permian remagnetisations. The third component determined by both well defined ChRMs and remagnetisation circles analysis passes the fold test. Because the folding started before or during the Stephano-Autunian, this third component is the primary magnetisation. Its palaeomagnetic pole (28.3°S, 58.9°E), close to other poles from the Saharan platform obtained from neighbouring periods but without palaeomagnetic tests, confirms the age of these last data. To cite this article: B. Bayou et al., C. R. Geoscience 334 (2002) 81–87.  相似文献   

均匀土-箱基-结构相互作用体系的计算分析   总被引：4，自引：0，他引：4  

李培振  吕西林  陈波  陈跃庆 《地震工程与工程振动》2002,22(5):115-121

采用通用有限元程序ANSYS，针对捱动台试验中的均匀土-箱基-结构试验进行了三维有限元分析，计算中土体的本构模型采用等效线性模型，利用面-面接触单元考虑土体与基础交界面的状态非线性。计算表明，基础底面和土体发生滑移，基础侧面和土体之间发生了滑移和脱离，上部结构柱顶加速度反应主要由基础转动引起的摆动分量组成，通过与试验结果的对照研究，二者得出的规律基本一致，验证了采用的计算模型与分析方法的合理性，为进一步计算研究和实际工程应用奠定了基础。  相似文献