ISA model: A constitutive model for soils with yield surface in the intergranular strain space          下载免费PDF全文

W. Fuentes  Th. Triantafyllidis 《国际地质力学数值与分析法杂志》2015,39(11):1235-1254

In this article, a new constitutive model for soils is proposed. It is formulated by means of plasticity, but in contrast to the precedent works, it presents a yield function describing a surface within the intergranular strain space. This latter is a state variable providing information of the recent strain history. An expression for the plastic strain rate has been proposed to guarantee the stress rate continuity. Under the application of medium or large strain amplitudes, the constitutive equation becomes independent of the intergranular strain and delivers a mathematical structure similar to some Karlsruhe hypoplastic models. Some simulations of monotonic and cyclic triaxial test are provided to evaluate and analyze the model performance. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Analysis of shaft resistance of jacked piles in sands     

Rodrigo Salgado 《国际地质力学数值与分析法杂志》2011,35(15):1605-1635

In recent years, pile jacking has become a viable alternative installation method for displacement piles. Pile jacking produces minimal noise, vibration and air pollution during installation. In addition, it is possible, at the end of jacking, to have a good estimate of the ultimate static capacity of the pile. In this paper, the shaft resistance of piles jacked into sand is studied using one‐dimensional finite element analysis. The finite element simulations, using a two‐surface plasticity model, demonstrate the effects of relative density and confinement on the unit shaft resistance of piles jacked in sand. The impact of the number of jacking strokes on the unit shaft capacity is also assessed. Based on the numerical results, we developed equations for shaft resistance quantifying the effects of relative density, initial confinement and number of jacking strokes. Predictions using these equations are compared with data obtained from centrifuge tests and field tests. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir     

Bin Xu  Ron C.K. Wong 《国际地质力学数值与分析法杂志》2013,37(18):3131-3149

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Niveo-aeolian deposits and denivation forms,with special reference to the great Kobuk Sand Dunes,Northwestern Alaska     

Eduard A. Koster  Jos W. A. Dijkmans 《地球表面变化过程与地形》1988,13(2):153-170

The geomorphology, lithology and chronostratigraphy of extensive, late Pleistocene inland and river dune sands, aeolian sand sheets (‘cover sands’) and loess deposits of periglacial origin in northwestern Europe are well known. However, the idea that some of these aeolian sediments result from niveo-aeolian processes is still an open question, as no diagnostic sedimentary features have yet been reported. Moreover, actual niveo-aeolian sediments and related denivation forms, reported from various cold-climate regions, are not suitable analogues. Recent observations in active dune fields in northwestern Alaska indicate that interstratification of wind-driven snow and sand preferentially occurs on slip faces of transverse, barchanoid or parabolic dune ridges. Annual denivation forms develop: e.g. snow ramparts, sinkholes, snow hummocks, snow meltwater fans and tensional cracks. The surface consists of a cracked wet sand layer with a dimpled surface and spongy structure. Although the preservation potential of these features is low in this specific case, similar features may be observed in ancient sediments elsewhere and provide useful palaeoclimatic indicators. The niveo-aeolian concept should therefore not specifically be related to late Pleistocene cover sand deposition in northwestern Europe, as previously assumed.  相似文献   

岩土材料弹塑性动本构模型研究概况     

徐干成  谢定义 《岩土力学》1993,14(3):81-93

本文介绍了砂土本构模型研究的历史及现状,特别是对国内较少涉及的动弹塑性本构模型研究情况作了详细的介绍,并就作者的理解体会作了一些评价。  相似文献   

Wind ripples in an active drift sand area in the Netherlands: A preliminary report     

Freddy Brugmans 《地球表面变化过程与地形》1983,8(6):527-534

Two types of wind ripples are distinguished in an active drift sand area near Hulshorst in The Veluwe (Central Netherlands). The common type has amplitudes of about 0·5 cm and wavelengths of some 11 cm, the atypical ripple has amplitudes of about 1 cm and wavelengths of some 16 cm. In both cases, the sand grains in the crests are coarser than those in the troughs. However, the coarseness of the grains in the crests of the higher ripples is much more pronounced than that of the lower. It is tentatively suggested that wind ripples are initiated by a regular downwind alternation in the impact energy of the descending grains in saltation, possibly due to fixed gravity waves in the sheared flows of air with grains which have strong density gradients with height.  相似文献   

Depth–transport functions and erosion–deposition diagrams as indicators of slope inclination and time-averaged traction forces: applications in tropical reef environments     

Johann Hohenegger  & Elza Yordanova 《Sedimentology》2001,48(5):1025-1046

The trigonometric relationship between slope inclination, the horizontally acting time‐averaged traction force and the vertical depth of transport allows the estimation of one factor, when both others are known. Depth–transport functions can be deduced by comparing the depth distributions of living organisms and their skeletal remains, and this paper simplifies this comparison using foraminifera in which a single test represents an individual. Differences in distribution parameters between living individuals and empty tests allow depth–transport functions to be determined; these functions differ between species at a single transect according to the varying buoyancies of the tests. Within a single species, differences in depth–transport functions between locations are based on either slope inclination or traction intensities. After establishing a mean depth–transport function by averaging species‐characteristic functions, the time‐averaged traction force acting on the studied transect can be calculated. Transport intensities are also estimated using an erosion–deposition diagram that combines the relative frequency distributions of living individuals and empty tests. The proportion of ‘eroded’, ‘parautochthonous’ and ‘allochthonous’ tests mirrors the influence of both slope inclination and traction force for the deposition of empty tests. To test the model, six species of symbiont‐bearing benthic foraminifers were investigated at two transects in front of a NW Pacific coral reef. One transect is distinguished by a strong slope flattening below the steep reef slope (30 m), whereas further steepening characterizes the equivalent part in the other transect. These differences are mirrored in the depth–transport functions as well as in the erosion–deposition diagrams of all species. The time‐averaged traction forces differ in intensities between transects, because of the position of the reef front with respect to the predominant wind direction. However, the form of the functions is identical and distinguished by an increase from the surface to 35 m depth, followed by a decrease down to 105 m. This can be explained by successive onshore and offshore forces acting on the shallow slope, such as the tropical cyclones that cross the region every summer.  相似文献   

唐山豪门（集团）公司玉田啤酒厂饮用天然矿泉水     

李金  梁爽 《华北地质矿产杂志》1995,10(4):454-458

玉田啤酒厂饮用天然矿泉水井位于城关镇三里屯西２００ｍ，玉田酒厂院内，矿泉水赋存于第四系砂、砾卵石层中，属含锶、偏硅酸的重碳酸钙·镁型矿泉水，现已开发利用。  相似文献   

塔中地区卡塔克1区块东河砂岩地震储层预测研究   总被引：1，自引：0，他引：1  

王炳章  徐雷鸣 《新疆地质》2006,24(3):270-275

采用基于地震波形分类的地震相分析与沉积相解释、波阻抗约束稀疏脉冲反演、地震多属性储层预测及油气检测等针对岩性油气藏的储层地震预测技术，从塔中地区卡塔克1区块泥盆系东河砂岩储层的生储盖组合条件及相关的地震地质特点出发，利用卡1三维地震资料开展目的层系的目标精细解释，结合已有的钻探、测井和测试等资料，揭示了东河砂岩储层砂体的空间展布特征，圈定出砂岩发育带，并对有利储层段的潜在含油气性进行了综合预测和评价。  相似文献   

大型现场室内两用直剪仪研制（Ⅱ）：试验测试   总被引：5，自引：3，他引：5  

刘小丽  罗锦添闵弘邓建辉  谭国焕 《岩土力学》2006,27(2):336-340

利用新近研制的大型现场室内两用直剪仪，对两种不同性质的砂样进行了剪切试验。在对干砂的直接剪切试验特性进行综述的基础上，从多方面对该大型直剪仪得出的干砂剪切试验数据进行了分析验证，结果表明该大型直剪仪得出的试验数据一致性好、可靠性较高，说明该大型直剪仪的基本剪切性能稳定，可进一步应用于相关岩土材料的试验研究。  相似文献