Estimating coefficients of volume compressibility from compression of strata and piezometric changes in a multiaquifer system in west Taiwan     

Chih-Hsi Liu  Yii-Wen Pan  Wei-Cha Hung 《Engineering Geology》2004,75(1):33-47

This paper estimates the coefficients of volume compressibility from variation in compressible layer thickness and changes in piezometric heads by using detail ground surface surveys and a multilayer monitoring well at a selected site (Shigang) within the Choshui River alluvial fan in west Taiwan. The paper integrates various types of in situ monitoring tools, including leveling surveys, continuous global position system (GPS) stations, multilevel layer compression and groundwater pressure head-monitoring wells, to investigate the situation and progress of the subsidence problem in the region. The results from the cross-analyses of the measured data show that surface settlement caused by the compression of strata is between the depths of 60 and 210 m where the clayey stratum within 120-180 m was most pronounced and contributes up to 53% of the total compression. The results indicate that the clayey stratum is under normal consolidation. The results also reflect the fact that 20% of settlement contribution comes from the sandy stratum within 90-120 m; the elasto-plastic behavior of this sandy stratum is clear. The coefficients of volume compressibility of the clayey and sandy stratum analysed from the stratum's compression records; they were 6.38×10⁻⁸ and 5.71×10⁻⁹ m²/N, respectively. Ultimately, this parameter estimation would permit to control and predict land subsidence based on change in pressure head which are related to groundwater extraction.  相似文献   

Beds comprising debrite sandwiched within co-genetic turbidite: origin and widespread occurrence in distal depositional environments   总被引：11，自引：0，他引：11  

P. J. Talling  L. A. Amy†  R. B. Wynn‡  J. Peakall†  M. Robinson 《Sedimentology》2004,51(1):163-194

Co‐genetic debrite–turbidite beds occur in a variety of modern and ancient turbidite systems. Their basic character is distinctive. An ungraded muddy sandstone interval is encased within mud‐poor graded sandstone, siltstone and mudstone. The muddy sandstone interval preserves evidence of en masse deposition and is thus termed a debrite. The mud‐poor sandstone, siltstone and mudstone show features indicating progressive layer‐by‐layer deposition and are thus called a turbidite. Palaeocurrent indicators, ubiquitous stratigraphic association and the position of hemipelagic intervals demonstrate that debrite and enclosing turbidite originate in the same event. Detailed field observations are presented for co‐genetic debrite–turbidite beds in three widespread sequences of variable age: the Miocene Marnoso Arenacea Formation in the Italian Apennines; the Silurian Aberystwyth Grits in Wales; and Quaternary deposits of the Agadir Basin, offshore Morocco. Deposition of these sequences occurred in similar unchannellized basin‐plain settings. Co‐genetic debrite–turbidite beds were deposited from longitudinally segregated flow events, comprising both debris flow and forerunning turbidity current. It is most likely that the debris flow was generated by relatively shallow (few tens of centimetres) erosion of mud‐rich sea‐floor sediment. Changes in the settling behaviour of sand grains from a muddy fluid as flows decelerated may also have contributed to debrite deposition. The association with distal settings results from the ubiquitous presence of muddy deposits in such locations, which may be eroded and disaggregated to form a cohesive debris flow. Debrite intervals may be extensive (> 26 × 10 km in the Marnoso Arenacea Formation) and are not restricted to basin margins. Such long debris flow run‐out on low‐gradient sea floor (< 0·1°) may simply be due to low yield strength (? 50 Pa) of the debris–water mixture. This study emphasizes that multiple flow types, and transformations between flow types, can occur within the distal parts of submarine flow events.  相似文献   

Mudstones of the Tanqua Basin, South Africa: an analysis of lateral and stratigraphic variations within mudstones, and a comparison of mudstones within and between turbidite fans     

P. O. D. Andersson  R. H. Worden† 《Sedimentology》2004,51(3):479-502

Permian deep‐water mudstones in the Tanqua Basin, South Africa, have been studied using geochemical and spectral gamma ray techniques. The mudstones occur as thick sequences between sand‐rich submarine fans, but also occur as thinner mud‐rich units within each fan. The interfan mudstones are interpreted to have accumulated during transgression and the consequent period of relatively high sea‐level, while the submarine fans and their intrafan mudstones were deposited during regression and relatively low sea‐level. Geochemical analyses revealed systematic differences between interfan and intrafan mudstones because the two types of mudstones have slightly different source lithologies. Differences between the two types of mudstone suggest that changes in relative sea‐level played a role in controlling exposure of sediment source areas. There are geochemical signals that display systematic stratigraphic trends within both interfan and intrafan mudstones. These are best explained by gradual denudation, exposure and weathering of different lithologies within a single sediment source area. Both interfan and intrafan mudstones have uniform geochemical signals along the flow direction except for the relative amount of uranium. It is most likely that the basinward increase in uranium in the mudstones is the result of reduced clastic dilution of uranium‐bearing pelagic fallout.  相似文献   

Inferring the mass fraction of floc-deposited mud: application to fine-grained turbidites   总被引：1，自引：0，他引：1  

K. J. Curran  P. S. Hill  T. M. Schell  T. G. Milligan†  D. J. W. Piper‡ 《Sedimentology》2004,51(5):927-944

Fine sediment deposition in the ocean is complicated by the cohesive nature of muds and their tendency to flocculate. The result is disaggregated inorganic grain size (DIGS) distributions of bottom sediment that are influenced by single‐grain and floc deposition. This study outlines a parametric model that characterizes bottom sediment DIGS distributions. Modelled parameters are then used to infer depositional conditions that account for the regional variation in the grain sizes deposited by turbidity currents on the Laurentian Fan–Sohm Abyssal Plain, offshore south‐eastern Canada. Results indicate that, on the channellized Laurentian Fan, the mass fraction of floc‐deposited mud increases only slightly downslope. The small evolution in this fraction arises because sediment concentration and turbulent energy are associated in turbidity currents. On the Sohm Abyssal Plain, however, the mass fraction of floc‐deposited mud decreases, probably as a result of lower sediment concentration at this source‐distal site. Estimates of the mass fraction of mud deposited as flocs suggest that floc deposition is the dominant mode by which sediment is lost from suspension, although single‐grain deposition contributes more to the depositional flux in proximal areas where high energy breaks flocs and in distal areas where low sediment concentration limits floc formation. It is concluded that, throughout the dispersal system, changes in the fraction of flocculated mud deposited from turbidity currents reflect changes in sediment concentration and energy downslope.  相似文献   

Fluvial sedimentation in a semi-arid region: the fan and interfan system of the Middle Souss Valley, Morocco     

Najat Bhiry 《Proceedings of the Geologists' Association. Geologists' Association》2004,115(4):313-324

  相似文献   

Prediction of ground displacements and velocities from groundwater level changes at the Vallcebre landslide (Eastern Pyrenees, Spain)   总被引：2，自引：5，他引：2  

Jordi Corominas  José Moya  Alberto Ledesma  Antonio Lloret  Josep A. Gili 《Landslides》2005,2(2):83-96

In active landslides, the prediction of acceleration of movement is a crucial issue for the design and performance of warning systems. The landslide of Vallcebre in the Eastern Pyreenes, Spain, has been monitored since 1996 and data on rainfall, groundwater levels and ground displacements are measured on a regular basis. Displacements observed in borehole wire extensometers have shown an immediate response of the landslide to rainfall episodes. This rapid response is likely due to the presence of preferential drainage ways. The occurrence of nearly constant rates of displacement in coincidence with steady groundwater levels suggests the presence of viscous forces developed during the movement. An attempt to predict both landslide displacements and velocities was performed at Vallcebre by solving the momentum equation in which a viscous term (Bingham and power law) was added. Results show that, using similar rheological parameters for the entire landslide, computed displacements reproduce quite accurately the displacements observed at three selected wire extensometers. These results indicate that prediction of displacements from groundwater level changes is feasible.  相似文献   

泥石流运动衰减动力学初步研究     

陈洪凯唐红梅  吴四飞 《中国地质灾害与防治学报》2005,16(B12):56-61

我国公路泥石流病害严重，泥石流淤埋公路构建筑物是一类常见的公路泥石流病害类型。泥石流衰减动力学是防治泥石流淤埋病害的重要关键技术，也是泥石流运动学、动力学研究的核心问题之一。本文作者运用泥沙运动力学及流体力学原理，初步建立了泥石流固相颗粒和液相浆体的能量衰减条件，把泥石流衰减模式概化为两类，即能量抑制衰减和能量自由衰减；通过泥石流沉积模型试验，得到了不同粘度泥石流体的沉积扇变化形态，随着泥石流体粘度的增大，沉积扇边缘变陡、扩展范围变小、纵轴线长度减小等结论与实际情况吻合；初步建立了泥石流能量衰减速率计算方法。研究成果为防治公路泥石流病害奠定了基础。  相似文献   

Autogenic avulsion,channelization and backfilling dynamics of debris‐flow fans          下载免费PDF全文

Tjalling de Haas  Wilco van den Berg  Lisanne Braat  Maarten G. Kleinhans 《Sedimentology》2016,63(6):1596-1619

Alluvial fans develop their semi‐conical shape by quasi‐cyclic avulsions of their geomorphologically active sector from a fixed fan apex. On debris‐flow fans, these quasi‐cyclic avulsions are poorly understood, partly because physical scale experiments on the formation of fans have been limited largely to turbidite and fluvial fans and deltas. In this study, debris‐flow fans were experimentally created under constant extrinsic forcing, and autogenic sequences of backfilling, avulsion and channelization were observed. Backfilling, avulsion and channelization were gradual processes that required multiple successive debris‐flow events. Debris flows avulsed along preferential flow paths given by the balance between steepest descent and flow inertia. In the channelization phase, debris flows became progressively longer and narrower because momentum increasingly focused on the flow front as flow narrowed, resulting in longer run‐out and deeper channels. Backfilling commenced when debris flows reached their maximum possible length and channel depth, as defined by channel slope and debris‐flow volume and composition, after which they progressively shortened and widened until the entire channel was filled and avulsion was initiated. The terminus of deposition moved upstream because the frontal lobe deposits of previous debris flows created a low‐gradient zone forcing deposition. Consequently, the next debris flow was shorter which led to more in‐channel sedimentation, causing more overbank flow in the next debris flow and resulting in reduced momentum to the flow front and shorter runout. This topographic feedback is similar to the interaction between flow and mouth bars forcing backfilling and transitions from channelized to sheet flow in turbidite and fluvial fans and deltas. Debris‐flow avulsion cycles are governed by the same large‐scale topographic compensation that drives avulsion cycles on fluvial and turbidite fans, although the detailed processes are unique to debris‐flow fans. This novel result provides a basis for modelling of debris‐flow fans with applications in hazards and stratigraphy.  相似文献   

Thresholds of intrabed flow and other interactions of turbidity currents with soft muddy substrates          下载免费PDF全文

Jaco H. Baas  Rafael Manica  Eduardo Puhl  Ana Luiza de Oliveira Borges 《Sedimentology》2016,63(7):2002-2036

Controlled laboratory experiments reveal that the lower part of turbidity currents has the ability to enter fluid mud substrates, if the bed shear stress is higher than the yield stress of the fluid mud and the density of the turbidity current is higher than the density of the substrate. Upon entering the substrate, the turbidity current either induces mixing between flow‐derived sediment and substrate sediment, or it forms a stable horizontal flow front inside the fluid mud. Such ‘intrabed’ flow is surrounded by plastically deformed mud; otherwise it resembles the front of a ‘bottom‐hugging’ turbidity current. The ‘suprabed’ portion of the turbidity current, i.e. the upper part of the flow that does not enter the substrate, is typically separated from the intrabed flow by a long horizontal layer of mud which originates from the mud that is swept over the top of the intrabed flow and then incorporated into the flow. The intrabed flow and the mixing mechanism are specific types of interaction between turbidity currents and muddy substrates that are part of a larger group of interactions, which also include bypass, deposition, erosion and soft sediment deformation. A classification scheme for these types of interactions is proposed, based on an excess bed shear stress parameter, which includes the difference in the bed shear stress imposed by the flow and the yield stress of the substrate and an excess density parameter, which relies on the density difference between the flow and the substrate. Based on this classification scheme, as well as on the sedimentological properties of the laboratory deposits, an existing facies model for intrabed turbidites is extended to the other types of interaction involving soft muddy substrates. The physical threshold of flow‐substrate mixing versus stable intrabed flow is defined using the gradient Richardson number, and this method is validated successfully with the laboratory data. The gradient Richardson number is also used to verify that stable intrabed flow is possible in natural turbidity currents, and to determine under which conditions intrabed flow is likely to be unstable. It appears that intrabed flow is likely only in natural turbidity currents with flow velocities well below ca 3·5 m s^?1, although a wider range of flows is capable of entering fluid muds. Below this threshold velocity, intrabed flow is stable only at high‐density gradients and low‐velocity gradients across the upper boundary of the turbidity current. Finally, the gradient Richardson number is used as a scaling parameter to set the flow velocity limits of a natural turbidity current that formed an inferred intrabed turbidite in the deep‐marine Aberystwyth Grits Group, West Wales, United Kingdom.  相似文献   

Sedimentary facies analysis and depositional model of gravity-flow deposits of the Yanchang Formation,southwestern Ordos Basin,NW China     

F. Liu  Y. Li  M. Xue  J. Sun 《Australian Journal of Earth Sciences》2016,63(7):885-902

During the deposition of the Chang-7 (Ch-7) and Chang-6 (Ch-6) units in the Upper Triassic, gravity flows were developed widely in a deep lake in the southwestern Ordos Basin, China. Based on cores, outcrops, well-logs and well-testing data, this paper documents the sedimentary characteristics of the gravity-flow deposits and constructs a depositional model. Gravity-flow deposits in the study area comprise seven lithofacies types, which are categorised into four groups: slides and slumps, debris-flow-dominated lithofacies, turbidity-current-dominated lithofacies, and deep-water mudstone-dominated lithofacies. The seven lithofacies form two sedimentary entities: sub-lacustrine fan and the slump olistolith, made up of three and two lithofacies associations, respectively. Lithofacies association 1 is a channel–levee complex with fining-/thinning-upward sequences whose main part is characterised by sandy debris flow-dominated, thick-bedded massive sandstones. Lithofacies association 2 represents distributary channelised lobes of sub-lacustrine fans, which can be further subdivided into distributary channel, channel lateral margin and inter-channel. Lithofacies association 3 is marked by non-channelised lobes of sub-lacustrine fans, including sheet-like turbidites and deep-lake mudstones. Lithofacies association 4 is represented by proximal lobes of slump olistolith, consisting of slides and slumps. Lithofacies association 5 is marked by distal lobes of slump olistolith, comprising tongue-shaped debris flow lobes and turbidite lobes. It is characterised by sandy debris flow, muddy debris flow-dominated sandstone and sandstone with classic Bouma sequences. Several factors caused the generation of gravity flows in the Ordos Basin, including sediment supply, terrain slope and external triggers, such as volcanisms, earthquakes and seasonal floods. The sediment supply of sub-lacustrine fan was most likely from seasonal floods with a high net-to-gross and incised channels. Triggered by volcanisms and earthquakes, the slump olistolith is deposited by the slumping and secondary transport of unconsolidated sediments in the delta front or prodelta with a low net-to-gross and no incised channels.  相似文献