Channelled erosion through a marine dump site of dredge spoils at the mouth of the Puyallup River, Washington State, USA     

Neil C. Mitchell   《Marine Geology》2005,220(1-4):131-151

Channels are relatively common on river-mouth deltas, but the process by which they arise from river sediment discharge is unclear because they can potentially be explained either by negatively buoyant (hyperpycnal) flows produced directly from the river outflow or by flows generated by repeated failure and mobilisation of sediment rapidly deposited at the delta front. Channels eroded through a dump site of dredge spoils are described here from multibeam and older sonar data collected in Commencement Bay, at the mouth of the Puyallup River. Shallow channels on the seaward upper surface of the dump site, away from any flows that could have been produced by delta front failures, suggest that at least some hyperpycnal flows were produced directly from the positively buoyant river outflow up to 200 m from the edge of the river mouth platform. The form of channel bed erosion is revealed by the longitudinal shape of the main eroded channel compared with the adjacent dump site profile. It suggests that the channel evolved by its steep front retreating, rather than by simple vertical entrenchment or diffusive-like evolution of the profile, a geometry interpreted as evidence that repeated failure of the bed occurred in response to shear stress imposed by bottom-travelling flows. Model calculations based on shear strengths back-calculated from the geometry of channel wall failures suggest that, if the main channel were eroded solely by hyperpycnal flows, their generation was remarkably efficient in order to create flows vigorous enough to cause channel bed failure. Besides the sediment concentration and discharge characteristics that have been considered to dictate the ability of rivers to produce hyperpycnal flows, it is suggested that the timing of floods with respect to the tidal cycle should also be important because extreme low tides may be needed to ensure that coarse sediment is transferred vigorously to the edge of river mouth platforms.  相似文献   

动态基准实时测量系统的开发与应用   总被引：3，自引：0，他引：3  

卫建东  徐忠阳  张良琚 《海洋测绘》2005,25(1):31-35

介绍了动态基准实时测量系统的硬件组成、站点上全站仪棱镜组合安装与检测方法、系统软件的开发及特点，最后对系统在广州地铁某地铁站结构变形自动监测中的应用情况进行了阐述。通过实际应用表明该系统能应用在自动化、高精度的变形监测领域。  相似文献   

船舶机舱自动集中监测报警系统结构与功能分析   总被引：1，自引：0，他引：1  

张峰 《海岸工程》2001,20(2):52-56

船舶机舱集中监测与报警系统目前已在船舶设计制造中得以广泛应用。对其组成、工作流程及功能进行了较为系统的阐述 ,为船舶使用者提供借鉴  相似文献   

水下自航式海洋观测平台技术发展研究   总被引：3，自引：2，他引：3  

惠绍棠 《海洋技术学报》2001,20(4):11-17

水下自航式海洋观测平台是一种新型海洋观测平台，主要用于无人、大范围、长时间水下环境监测，包括物理学参数、海洋地质学和地球物理学参数，海洋化学参数、海洋生物学参数及海洋工程方面的现场接近观测。其特点是：成本低，环境适应性强，可冲破人工潜水极限而进入现场进行接近观测，免除了ROV需要水面支援母船的累赘，减少作业经费，体积小，使用方便，便于布放回收；可根据水声信号摇控或预置程序控制，按要求进行相关项目观测；有自主动力，水下运行时间相对较长，有源噪声低，可进行隐弊观测，正是基于以上的优点，近几年颇得海洋环境监测和海军方面的青睐，本文介绍了国际上水下自动观测平台的发展历史和现状，提出了我国开展研究水下自动观测平台的重要性及研究的面容。  相似文献   

陆坡非旋转重力羽状流的数值模拟          下载免费PDF全文

王凯  占全安  施心慧 《海洋科学》2007,31(7):55-62

借助MITgcm模式使用二维非静力近似在水平方向采用不等间距网格,模拟了陆坡非旋转重力羽状流的流动。模拟显示陆坡上的重力羽状流的运动比较复杂。通过数值实验,发现改变地形或调整冷源强度都会影响沿陆坡下沉的低温高密度水的羽状流形态,潮汐亦会对重力羽状流有一定的影响。经计算发现在陆坡处,Richardson数小于1/4,宜发生Kelvin-Helmholtz不稳定性,并由卷挟导致环境流体与高密度流体混合,沿着斜坡加速下滑。  相似文献   

均匀土质边坡稳定性计算的一种新方法     

单辉  葛磊 《海岸工程》2001,20(2):34-39

根据土力学原理 ,推导出一种在不考虑渗流力的情况下 ,确定斜坡临界滑动面和计算斜坡稳定系数的新方法。介绍了该方法在若干土石方工程中的应用实例。  相似文献   

沉降监测多项式回归分析与神经网络预测     

田丰  文鸿雁  张静 《海洋测绘》2007,27(4):23-27

使用多项式和切比雪夫(Tchebyshev)多项式分别对沉降监测数据进行回归分析以预测未来沉降值,其中切比雪夫多项式的外推效果较好;应用前向BP神经网络对两种不同的单因子输入模式进行非线性函数逼近,并进行了不同采样步长的比较,实例表明将时间点作为网络的输入对沉降进行预测效果较好。  相似文献   

结构损伤初步定位的简便方法     

孟海平  杨永春  杨风艳 《中国海洋大学学报(自然科学版)》2006,36(5):785-789

提出将基于动态特性的检测方法与局部物理检测手段相结合的探伤思路。利用动力学方法进行实时监测及损伤区域的粗略定位,再由物理探测方法实现损伤程度和位置的精确判断,从而降低对动态检测方法的精度要求。此外,文中尝试直接由结构的动力响应信号构建能量指标识别结构损伤的方法,不需要进行模态参数识别,算法简单,有望应用于海洋平台、高层建筑等可简化为串联多自由度体系的结构的实时监测和损伤初步定位。  相似文献   

Periodic Intrusion of Cold Water from the Pacific Ocean into the Bottom Layer of the Bungo Channel in Japan     

Atsushi Kaneda  Hidetaka Takeoka  Eiji Nagaura  Yoshitsugu Koizumi 《Journal of Oceanography》2002,58(4):547-556

A cold-water intrusion, called a “bottom intrusion”, occurs in the lower layer of the Bungo Channel in Japan. It is an intrusion from the shelf slope region of the Pacific Ocean margin in the south of the channel. In order to reveal the fundamental characteristics of the bottom intrusion, we conducted long-term observations of water temperature at the surface and bottom layers of the channel and 15-day current observations at the bottom of the shelf-break region. The long-term water temperature data indicated that the bottom intrusion occurs repeatedly between early summer and late autumn, and its reiteration between early and mid-summer causes a local minimum of water temperature in the lower layer in mid-summer. Moreover, the data revealed that most of the bottom intrusions occurred in neap tidal periods. The current meter recorded a bottom intrusion with a speed of approximately 15 cm⋅s⁻¹. The current meter also revealed that the intruded cold water slowly retreated back to the shelf slope region after the intrusion. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

A New Fall-Rate Equation for T-5 Expendable Bathythermograph (XBT) by TSK     

Kizu  Shoichi  Yoritaka  Hiroyuki  Hanawa  Kimio 《Journal of Oceanography》2005,61(1):115-121

The accuracy of the manufacturer’s fall-rate equation for the T-5 Model of expendable bathythermograph (XBT) has been investigated based on about 300 collocated pairs of XBT-CTD (Conductivity-Temperature-Depth profiler) measurements in various climatological regions. We found that the equation systematically overestimates depth by about 5% for the T-5 produced by Tsurumi Seiki, Co. Ltd. (TSK), but almost no bias is associated with the T-5 produced by Sippican, Inc., in USA. The cause of this difference is not clear, because the two manufacturers’ T-5 probes are reported to have identical shape and weight in water. We propose a new fall-rate equation for the TSK T-5: z(t) = 6.54071t - 0.0018691t ², where z(t) is depth in meters at time, t, in seconds.  相似文献