Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method          下载免费PDF全文

James J. Oetomo  Eric Vincens  Fabian Dedecker  Jean‐Claude Morel 《国际地质力学数值与分析法杂志》2016,40(7):1099-1120

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Reaction softening by dissolution–precipitation creep in a retrograde greenschist facies ductile shear zone,New Hampshire,USA          下载免费PDF全文

R. J. McAleer  D. L. Bish  M. J. Kunk  K. R. Sicard  P. M. Valley  G. J. Walsh  B. A. Wathen  R. P. Wintsch 《Journal of Metamorphic Geology》2017,35(1):95-119

We describe strain localization by a mixed process of reaction and microstructural softening in a lower greenschist facies ductile fault zone that transposes and replaces middle to upper amphibolite facies fabrics and mineral assemblages in the host schist of the Littleton Formation near Claremont, New Hampshire. Here, Na‐poor muscovite and chlorite progressively replace first staurolite, then garnet, and finally biotite porphyroblasts as the core of the fault zone is approached. Across the transect, higher grade fabric‐forming Na‐rich muscovite is also progressively replaced by fabric‐forming Na‐poor muscovite. The mineralogy of the new phyllonitic fault‐rock produced is dominated by Na‐poor muscovite and chlorite together with late albite porphyroblasts. The replacement of the amphibolite facies porphyroblasts by muscovite and chlorite is pseudomorphic in some samples and shows that the chemical metastability of the porphyroblasts is sufficient to drive replacement. In contrast, element mapping shows that fabric‐forming Na‐rich muscovite is selectively replaced at high‐strain microstructural sites, indicating that strain energy played an important role in activating the dissolution of the compositionally metastable muscovite. The replacement of strong, high‐grade porphyroblasts by weaker Na‐poor muscovite and chlorite constitutes reaction softening. The crystallization of parallel and contiguous mica in the retrograde foliation at the expense of the earlier and locally crenulated Na‐rich muscovite‐defined foliation destroys not only the metastable high‐grade mineralogy, but also its stronger geometry. This process constitutes both reaction and microstructural softening. The deformation mechanism here was thus one of dissolution–precipitation creep, activated at considerably lower stresses than might be predicted in quartzofeldspathic rocks at the same lower greenschist facies conditions.  相似文献   

Contrast in stress–strain history during exhumation between high- and ultrahigh-pressure metamorphic units in the Western Alps: Microboudinage analysis of piemontite in metacherts     

《Journal of Structural Geology》2016

Our analyses of microboudinage structures of piemontite grains embedded within six samples of metachert, one collected from an ultrahigh-pressure (UHP) metamorphic unit at Lago di Cignana in Italy of the Western Alps, and the other five from surrounding high-pressure (HP) metamorphic units in Italy and France, have revealed that the structures are all symmetrical in type, and were presumably produced in coaxial strain fields. Stress–strain analyses of the microboudinaged grains revealed significant contrasts in the stress and strain histories of the UHP and HP metamorphic units, with the differential stress recorded by the UHP sample being unequivocally lower than that recorded by the five HP samples. In addition, our analyses showed that the UHP sample underwent stress-relaxation during microboudinage, whereas the five HP samples did not. On the basis of these observations and analyses we discuss the mechanical decoupling of the UHP and HP units that led to different histories in differential stress between the units during exhumation of the Western Alps.  相似文献   

Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD     

Yang Xiao-feng  Zhang Chen-rong  Huang Mao-song  Yuan Ju-yun 《岩土力学》2016,(10):2877-2884

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.  相似文献   

华北克拉通基底花岗质片麻岩变形和流变学研究——以辽西寺儿堡地区为例   总被引：2，自引：0，他引：2  

李婧  刘永江  李伟民  金巍  梁琛岳  温泉波  张媛媛 《大地构造与成矿学》2016,(5):891-907

辽西寺儿堡镇新太古代花岗质片麻岩内发育的宏观、微观构造变形特征表明该地区曾遭受了强烈的韧性变形改造。花岗质岩石变形程度在初糜棱岩–糜棱岩之间,岩石经历了SWW向左行剪切作用改造。岩石中石英有限应变测量判别结果表明,构造岩类型为L-S型,为平面应变。岩石的剪应变平均值为1.43,运动学涡度值为0.788~0.829,指示岩石形成于以简单剪切为主的一般剪切变形中。此外,石英颗粒以亚颗粒旋转重结晶和颗粒边界迁移重结晶作用为主,长石颗粒塑性拉长,部分发生膨凸式重结晶作用;石英组构特征(EBSD)揭示石英以中–高温柱面滑移为主;石英颗粒边界具有明显的分形特征,分形维数值为1.151~1.201,指示了中高温变形条件。综合石英、长石的变形行为、石英组构特征以及分形法Kruhl温度计的判别结果,推断辽西寺儿堡镇新太古代花岗质片麻岩经历过480~600℃的中高温变形,其同构造变质相为高绿片岩相-低角闪岩相。花岗质岩石的古差异应力为10.62~12.21 MPa,估算的应变速率为10~(–11.67)~10~(–13.34) s~(–1),即缓慢的变形,可能记录早期中高温、低应变速率的韧性变形过程,反映华北克拉通基底中下部地壳变形特征。  相似文献   

中国陆块海相盆地成钾条件与预测研究进展综述     

刘成林  吴驰华  王立成  方小敏  赵艳军  颜茂都  张永生  曹养同  张华  吕凤琳 《地球学报》2016,37(5):581-606

中国古代海相钾盐找矿是一个"久攻不破"的难题,古代海相及海陆交互相盆地能否成钾也是长期争议的问题,也就是中国小陆块能否成钾、成大钾矿的关键问题。为此,本文以板块构造运动为主线,对中国主要小陆块漂移历史、成盆构造、古气候、古地理及海相/海陆交互相蒸发岩沉积特征进行了系统梳理和总结;在此基础上,基于盆地"构造-物源-气候"三要素耦合成钾理论,分析中国小陆块海相盆地成钾条件、成矿机理;同时,总结和借鉴全球海相钾盐成矿标志,建立钾盐成矿评价指标体系。基于这些研究基础,借助对主要陆块的区域构造和古地理特征、物质来源、古气候面貌等恢复及分析,对主要陆块的海相成钾潜力进行评价,同时预测找钾战略靶区。钾盐成矿模式研究表明:兰坪—思茅盆地白垩系、上扬子陆块四川盆地中—下三叠统、华北陆块陕北盆地中奥陶统及塔里木陆块库车盆地古近系等盆地及其层位具有较大的成钾潜力。结合成钾指标对比分析,优选圈定了思茅盆地南部、四川盆地中东部及塔里木的库车盆地等战略靶区内较为明确的重点靶区,可以进一步开展钻探验证。这些研究成果为在中国继续开展海相钾盐成矿研究和找钾提供科学依据。  相似文献   

构造物理模拟和PIV有限应变分析对构造裂缝预测的启示   总被引：1，自引：0，他引：1       下载免费PDF全文

沈礼  贾东  尹宏伟  魏东涛  陈竹新  孙闯  崔键 《高校地质学报》2016,22(1):171

油气储层中构造裂缝发育与有限应变状态关系密切,为了探索有限应变分析与构造裂缝预测的新技术方法,此次研究设计完成了一组单侧挤压收敛模型的物理模拟实验,并引入粒子图像测速(PIV,Particle Image Velocimetry)技术对实验过程进行了定量化分析。实验模型在垂向上为含粘性层的多层结构,实验结果形成了一个肉眼可见的箱状褶皱。通过PIV技术可以获取实验模型变形演化过程中各阶段的位移场数据,计算出各阶段的增量应变,实现从初始状态到褶皱形成之后整个变形过程的有限应变分析,探讨构造裂缝成因机制和分布规律,进行定量化裂缝预测。挤压变形过程初期,应变分布范围很广,有限应变较弱(约4%~8%),在挤压方向上的线应变表现为弱压应变,在垂向上的线应变表现为弱张应变,这种现象是褶皱和断层产生前平行层缩短和层增厚的纯剪变形结果,也是区域型张裂缝和剪裂缝形成的主要机制。褶皱和断层即将发育之时至发育之后,应变局限在断层发育的剪切带及附近区域,有限应变表现为较强(达20%)的剪切应变和剪切张应变,是断层面附近简单剪切变形作用的结果,也是局部型剪裂缝和张剪裂缝形成的主要机制。  相似文献   

黄海南部小黄鱼洄游分布及种群结构特征     

熊瑛  仲霞铭  汤建华  杨健 《海洋学报(英文版)》2016,35(6):34-41

Monthly fishery survey data of the small yellow croaker Larimichthys polyactis in the southern Yellow Sea from2003 and 2013 were employed to evaluate the variation in the resource distribution and biological characteristics(especially body length and sex ratio) in the population on a decadal scale.The results indicated that the small yellow croaker migrated from the Shawai fishing ground to the Dasha fishing ground in spring and was mainly distributed in the central and western parts of the Dasha fishing ground in April and May.Larimichthys polyactis in the Dasha fishing ground migrated eastward to offshore wintering grounds in autumn and reached the central Dasha fishing ground in October and November.The small yellow croaker entered the western waters of the Shawai fishing ground in winter.A large number of age 0+ fish occurred in the Shawai and Jiangwai fishing grounds in October of 2003 and 2013.The body lengths of the spawning stock and wintering stock in 2013 were larger than those in 2003,and the monthly sex ratios(female to male) were significantly less than 1 in both years.The monthly distribution of this fish in the southern Yellow Sea was consistent with a previous finding that "the stock migrated between the wintering grounds in the west of Jeju Island and the Lüsi spawning grounds" but tended to move more northward,with the spawning grounds extending outward.In the past decade,body length variation experienced a decline after an increase,rather than a steady decrease.The sex ratio in the single-stick stow net showed a tendency to increase over the decade,but was either less than or more than 1 depending on the fishing gear;therefore,further studies should be conducted to determine the sex structure.  相似文献   

Neotectonics of the Kharaulakh sector of the Laptev Shelf     

V.S. Imaev  L.P. Imaeva  O.P. Smekalin  A.V. Chipizubov  A.N. Ovsyuchenko  I.I. Kolodeznikov 《Russian Geology and Geophysics》2018,59(7):813-826

Seismotectonic deformation and crustal stress pattern have been studied comprehensively in major seismogenic structures of the Kharaulakh sector of the Verkhoyansk fold system and adjacent parts of the Chersky seismotectonic zone. The study focuses on neotectonic structures, deep structure, and systems of active faults, as well as tectonic stress fields inferred by tectonophysical analysis of Late Cenozoic faults and folds. The results, along with geological and geophysical data, reveal main strain directions and structural patterns of crustal stress and strain in the Arctic segment of the Eurasia-North America plate boundary. The area is a junction of mid-ocean and continental structures evolving in a mixed setting of extension, compression, and their various combinations. The rotation pole of the two plates is presumably located near Buor-Khaya Bay. In this case, extension is expected to act currently upon the neotectonic structures north of the bay and compression to control those in the south and southeast. This inference is consistent with the identified zoning of stress and strain in the Kharaulakh sector.  相似文献   

矿石体重回归分析在新疆乌宗布拉克矿区的应用研究          下载免费PDF全文

毛红伟 《地质找矿论丛》2021,36(2):228-232

在资源储量估算的过程中,矿石小体重的准确与否将直接影响到资源储量估算的客观程度。对矿石小体重的准确预测将需要通过大量的统计分析工作,传统的方法是利用矿石小体重的算术平均值进行估算矿床资源储量,并没有考虑到多矿种对矿石小体重的影响程度。本文利用Excel软件"数据分析"的"回归"功能模块,对实验室所测定的矿石小体重值与其对应品位进行二元线性回归分析,快速、准确地构建矿石体重与其品位的数学模型,从而为资源储量估算提供了更客观、更科学的矿石体重模型。  相似文献