Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea     

Herber  R.  Weigel  W.  Wong  H. K. 《Marine Geophysical Researches》1997,19(3):257-265

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.  相似文献   

Variability in maturity and growth in a heavily exploited stock: cod (Gadus morhua L.) in the Irish Sea     

Armstrong  M.J; Gerritsen  H.D; Allen  M; McCurdy  W.J; Peel  J.A.D 《ICES Journal of Marine Science》2004,61(1):98-112

  相似文献   

塔里木盆地的构造演化   总被引：6，自引：0，他引：6  

杨克绳 《海洋地质前沿》2005,21(2):25-29

从地震大剖面显示，塔里木盆地发育为手风琴式的演化史。大体上形成有3层“断-坳”结构：①震旦系的“断”，古生界-三叠系的“坳”；②侏罗系的“断”，上白垩系的“坳”；③古近系的“断”，新近系的“坳”。断陷与坳陷分别由拉张与挤压应力场所致，这种应力场的变化是由相邻洋壳板块俯冲倾角由小到大的变化所引起的。由于地壳的多旋回运动，多次发生构造沉积演变，构成了多套生储盖组合，多领域、多种圈闭类型的油气藏，从震旦系-古生界-中生界-新生界，各断陷-坳陷结构的盆地都有可能形成油气藏的地质条件。  相似文献   

土工布充砂袋的应用及其研究进展   总被引：10，自引：1，他引：10  

张文斌  谭家华 《海洋工程》2004,22(2):98-104

对土工布充砂袋技术和国内外的应用进行了介绍。鉴于土工布充砂袋属于一种新兴起的土工新材料和新技术，在设计和工程实际中还存在着许多急待解决的问题，着重对各种典型状态和典型环境下的土工布充砂袋的变形、应力和土工布充砂袋堆的稳定性研究进展进行综述，最后提出进一步研究的思路。  相似文献   

山东全新世滨海软土与工程地质灾害的研究   总被引：2，自引：0，他引：2  

吴建政 《海洋地质与第四纪地质》1995,15(3):43-54

山东全新世滨海软土分布在海湾、泻湖、河口区，厚度１－１０ｍ。海湾、泻湖软土为淤泥、淤泥质土，陆源物质供应丰富的浅水区，软土颗粒偏粗，强度相对较高，触变性对建筑物危害性大，陆源物质供应少的深水区，软土颗粒偏细，低强度、高压缩性、沉降变形大和蠕变性是危及建筑物稳定的主要因素。海湾、泻湖软土位于地下水位下，具低透水性，掩埋后短期不易排水固结，软土下为强度较高的冲积物，对一般建筑物，利用强夯、粉喷搅拌桩、  相似文献   

软土海岸地区测量控制点标志的设立     

苏衍坤  李新国  朱绪伟  苏衍国 《海洋测绘》2007,27(3):43-47

分析了软土、湿地、滩涂地区特殊地理环境对测量控制点的影响;主要探讨了此类地区控制点标志的设计、施工。借助于建筑桩基技术和道桥施工方法,首次成功实现了某三角洲湿地滩涂地区统一布网。几年来,结合滩涂湿地测量、海岸防护和滩涂开发工程对部分控制点进行了初步检测,给出了部分检测数据。应用和检测均表明:桩基标石可较好地解决软土、湿地、滩涂地区控制点布设难题,显著提高软土海岸地区测量控制点标志的稳固性,从而延长控制网的可使用期。  相似文献   

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures     

刘建起陈滨  王海艳 《中国海洋工程》2005,19(3):519-528

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.  相似文献   

东亚岛弧地形横剖面与板块运动   总被引：2，自引：2，他引：2  

史学建 《海洋地质与第四纪地质》1997,17(4):91-99

通过对东亚岛弧横剖面形态的系统分析，并结合弧前的构造应力的分析，作者认为，东亚岛弧形成于板块东移的构造环境中，横剖面形态存在两种基本类型即内缓外陡型和内陡外缓型，这两种不同的横剖面具有不同的弧前应力，前者表现弧前挤压，后者表现弧前引张，这反映地貌形态与构造应力之间的密切关系。  相似文献   

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints     

Chen Tieyun Zhang Huiyuan Professor  Shanghai Jiao Tong University  Shanghai Doctor of Engineering  Shenzhen Shipbuilding Trading Co. LTD. 《中国海洋工程》1993,(1)

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.  相似文献   

牙鲆鱼苗长途运输技术的试验研究   总被引：3，自引：0，他引：3  

林琼武  黄标武  吴佳伟 《台湾海峡》2003,22(1):59-64

本实验对10个批次，总数为19047尾的不同规格和产地的牙鲆鱼苗长途运输效果进行了研究。结果表明，规格为9-12cm的鱼苗，在水温6－12℃，运输时间为35－50h，采用空运和低温活水车运输，运输死亡率为664尾，死亡率为3.39%，低温活水车短途运输是可行的，尽管长途车运方式成本较低，但由于应激强度较大，对鱼苗的生长性能影响较为严重，驯养10d累计死亡率最高达18.1%，这种模式不可取。低温（6℃）、小规格（9cm)的空运较适合牙鲆鱼苗长途运输。此外，本文还就运输应激反应、预防措施和药物防治进行详细的讨论。  相似文献