黔西南水银洞爆破角砾岩筒与金元素超常富集     

邱小平  刘世川  魏密 《地球学报》2021,42(6):849-858

水银洞金矿床曾被认为是滇黔桂地区最有代表性的微细浸染型金矿(卡林型金矿),然而矿床的金品位明显高于一般意义上的卡林型金矿床,且金矿体与气液爆破角砾岩关系密切.气液爆破角砾岩呈垂直筒状产状,两侧断裂矿化带呈向上扩张的"喇叭口"状成矿空间,富金矿体紧密围绕角砾岩筒分布.根据野外和显微镜观察,角砾岩块成分复杂与显著磨圆.气液角砾岩筒的角砾岩显著富集金、稀土、亲地幔过渡元素Ti、Cr、Ni、Co、V等,以及Zr、Hf等,明显地区别于围岩,反映出深源流体快速上升的气液爆破角砾岩的特征,角砾岩筒实际上具备含金成矿流体的上涌通道的功能.岩筒中早期角砾岩的角砾含Au达18×10–6,属于深部金矿体的爆破碎块,显示出水银洞金矿床可观的深部找矿勘探前景.  相似文献   

巴音戈壁盆地塔木素铀矿床含矿砂岩成岩作用类型、演化序列及其对铀成矿的约束     

张成勇  夏菲  严兆彬  邓薇  聂逢君  张鹏飞  文振宇  刘波  戴明建  封志兵 《地球学报》2021,42(6):907-920

勘查和研究发现部分砂岩型铀矿床中不仅有表生氧化流体作用还存在深部流体的参与,这类砂岩型铀矿床蚀变类型多样且成因复杂.塔木素砂岩型铀矿表生流体和深部流体活动都很明显,砂岩普遍固结且后生蚀变类型独特,因此,恢复成岩成矿事件及其演化过程,对揭示铀沉淀富集机理至关重要.本文通过镜下鉴定、电子探针、扫描电镜分析等,系统研究了塔木素矿床含矿砂岩成岩作用特征与后生蚀变矿物生成序列,重塑了成岩成矿事件的演化过程.研究结果显示,塔木素矿床砂岩中压实作用较弱而胶结作用很强,重结晶作用普遍,是造成目的层致密的主要原因,赤铁矿、褐铁矿化、碳酸盐化、石膏化是该地区主要的胶结类型.将该地区的成岩演化划分为沉积-早成岩阶段、早期氧化流体作用阶段、热流体改造阶段和晚期氧化流体弱改造阶段.成岩环境由弱碱性向酸性环境转变的过程中的氧化还原过渡部位是造成铀沉淀的关键,大规模的氧化作用是矿床形成的基础,后期热流体活动对早期形成的低品位铀矿石进行叠加改造,是成矿的关键环节.  相似文献   

Geological characteristics and ore genesis of Houfangzi graphite deposit in Northwestern Hebei Province     

ZHANG Xingkang  FAN Yupeng  JIN Song  JIA Zhenghai 《中国地质调查》2021,7(6):20-26

Houfangzi graphite deposit is located in the middle of the graphite metallogenic belt in the northern margin of North China Block in Hebei Province, which belongs to regional metamorphic type graphite deposit. In this paper, through rock-mineral determination, IP ladder sections and exploratory trench survey, the authors have discussed its metallogenic geological characteristics and ore body characteristics, and analyzed its ore genesis. The research results show that the ore bodies are mainly in the graphitic marble of Dongjingzi Formation of Hongqiyingzi Group, which are stratified and controlled by layers, with NE trend and NNW inclination. The IP anomaly shows that Houfangzi graphite deposit is characterized by low resistance and high polarization. Ore bodies are stable and of big scale, and their fixed carbon content ranges from 1.42% to 3.28%, which has the potential to be a large graphite deposit. The ore-forming material came from granulite and graphite marble, while the regional metamorphism is the main mineralization of Houfangzi graphite deposit, with the enrichment and increasement caused by late magmatic activity and migmatization.  相似文献   

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review     

《China Geology》2021,4(4):686-719

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.  相似文献   

赣中新衡萤石矿床成矿流体特征研究：来自流体包裹体及氢氧同位素的证据     

张栋梁  吴德海  潘家永  吴赞华  陈光飞  欧阳斌  费磊  袁庚红  胡昊  余明军 《地质论评》2024,70(S1):70-72

  相似文献   

冀西北矿集区金矿成矿规律与找矿预测     

张运强  李朋伟  王志民  郝森  岳喜能  赵旭  张鑫 《地质论评》2024,70(S1):45-48

  相似文献   

川滇黔相邻区沉积型稀土富集规律与成因研究     

田恩源  肖斌  龚大兴 《地质论评》2024,70(S1):260-260

  相似文献   

Geodynamic modelling of the Century deposit,Mt Isa Province,Queensland     

A. Ord  B. E. Hobbs  Y. Zhang  G. C. Broadbent  M. Brown  G. Willetts 《Australian Journal of Earth Sciences》2013,60(6):1011-1039

This paper is concerned with an example of quantitative modelling of orebody formation as a guide to reducing the risk for future mineral exploration. Specifically, the paper presents a detailed 3–D numerical model for the formation of the Century zinc deposit in northern Queensland. The model couples fluid flow with deformation, thermal transport and chemical reactions. The emphasis of the study is a systems approach where the holistic mineralising system is considered rather than concentrating solely on the mineral deposit. In so doing the complete plumbing system for mineralisation is considered with a view to specifying the critical conditions responsible for the ore deposit occurring where it does and having the size and metal grades that are observed. The numerical model is based on detailed geological, tectonic, isotopic and mineralogical data collected over the past 20 years. The conclusions are that the Century zinc deposit is located where it is because of the following factors: (i) a thermal anomaly is associated with the Termite Range Fault due to advection of heat from depth by fluid flow up the Termite Range Fault; (ii) bedding‐plane fissility in the shale rocks hosting the Century zinc deposit has controlled the wavelength and nature of D₁ folding in the vicinity of the deposit and has also controlled increases in permeability due to hydrofracture of the shales; such hydrofracture is also associated with the production of hydrocarbons as these shales passed through the ‘oil‐window’; (iii) Pb–Zn leached from crustal rocks in the stratigraphic column migrated up along faults normal to the Termite Range Fault driven by topographic relief associated with inversion at the end of the Isan Orogeny; these fluids mixed with H₂S derived at depth moving up the Termite Range Fault to mix with the crustal fluids to precipitate Pb–Zn in a plume downstream from the point of mixing. Critical factors to be used as exploration guides are high temperatures, carbonaceous fissile shales now folded into relatively tight D₁ folds, fault‐controlled plumbing systems that enable fluid mixing, depletion of metals upstream of the deposit and,in particular,a very wide Fe‐depletion halo upstream of the deposit.  相似文献   

Silurian and Devonian systems     

Maxwell R. Banks  E. D. Gill  K. L. Burns 《Australian Journal of Earth Sciences》2013,60(2):177-187

The Ediacara mineral field is situated 30 km W of Beltana on the western margins of the Flinders Ranges, South Australia, and consists of silver‐lead and copper deposits in lower Cambrian carbonate rocks that contain anomalous base‐metal contents throughout the Adelaide Geosyncline. The lower Cambrian rocks, which consist of the basal Parachilna Formation and overlying Ajax Limestone, rest disconformably on the Precambrian, and at Ediacara occupy a shallow N‐S elongate syncline near the hinge zone of the Adelaide Geosyncline. The main primary ore minerals of the silver‐lead mineralization are galena and pyrite, with very minor chalcopyrite and sphalerite, and rare tetrahedrite and pearceite. The gangue consists mainly of silica (both chalcedony and quartz), with minor dolomite and rare barite. The mineralization is stratabound and occurs in conformable zones, the lowest of which commences about 30–50 m above the base of the Cambrian sequence. The host to the silver‐lead mineralization, the Ajax Limestone, can be subdivided into three units which represent a set of lithologies, structures and organic traces indicative of a shallow near‐shore carbonate environment. The silver‐lead mineralization is mainly present in sandy and laminated dolomites which were deposited in an environment ranging from sub‐tidal to bar and channel and tidal flat, respectively. Four types of mineralization have been recognized; disseminated sulphides of syngenetic and/or diagenetic origin and epigenetic concentrations along stylolites, in veins and as breccia fillings. Post‐depositional solution activity has affected a large proportion of the carbonate sequence. The effects of this activity range from stylolites through stylobreccias to solution collapse breccias. The epigenetic concentrations of mineralizations have apparently been formed by the remobilization of the disseminated sulphides during solution activity. The ore and gangue minerals of the epigenetic mineralization display both euhedral forms and distinct colloform banding, and framboidal textures have also been observed in both pyrite and galena. There is evidence of repeated episodic precipitation and no simple paragenetic sequence can be recognized. Fluid inclusions in silica and dolomite associated with the epigenetic mineralization have homogenization temperatures of 159 to 199°C and freezing temperatures that indicate the fluids to be saline brines containing NaCl with CaCl₂ and/or MgCl₂. Sulphur isotope analyses show a range of 8³⁴S values from ‐12.5 to +8.6 per mil, with no evidence of significant differences between the four types of mineralization. The data suggest deposition of the disseminated sulphides as a result of biological reduction of seawater sulphate in a system partially open with respect to sulphate supply. Subsequent remobilization of sulphides apparently involved little or no sulphur isotope fractionation. The Ediacara silver‐lead deposits have many features in common with Mississippi Valley‐type lead‐zinc deposits and appear to have similarities in terms of genesis, in that the epigenetic mineralization has been formed as a result of post‐depositional solution activity during diagenesis in a sedimentary basin. The scale of transport of the metals deposited as the epigenetic mineralization at Ediacara appears, however, to have been very much less than that of the metals in other Mississippi Valley‐type deposits.  相似文献   

Genetic and ore-forming ages of the Fe–P–(Ti) oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block,NW China     

W. Chen  X. B. Lü  Q. Yuan  X. D. Wang 《Australian Journal of Earth Sciences》2013,60(7):1041-1062

Abstract

During the past 50 years, many geological and ore-deposit investigations have led to the discovery of the Fe–P–(Ti)-oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block, northeastern Tarim Craton. In this paper, we discuss the genetic and ore-forming ages, tectonic setting, and the genesis of these deposits (Kawuliuke, Qieganbulake and Duosike). LA-ICP-MS zircon U–Pb dating yielded a weighted mean ²⁰⁶Pb/²³⁸U ages of 811?±?5?Ma, 811?±?4?Ma, and 840?±?5?Ma for Kawuliuke ore-bearing pyroxenite, Qieganbulake gabbro and Duosike ore-bearing pyroxenite, respectively. The CL images of the Kawuliuke apatite grains show core–rim structure, suggesting multi-phase crystallisation, whereas the apatite grains from Qieganbulake and Dusike deposits do not show any core–rim texture, suggesting a single-stage crystallisation. LA-ICP-MS apatite ²⁰⁷Pb-corrected U–Pb dating provided weighted mean ²⁰⁶Pb/²³⁸U ages of 814?±?21?Ma and 771?±?8?Ma for the Kawuliuke ores, and 810?±?7?Ma and 841?±?7?Ma for Qieganbulake and Duosike ores, respectively. The core–rim texture in apatite by CL imaging as well as two different ore-forming ages in the core and rim of the apatite indicate two metallogenic events for the Kawuliuke deposit. The first metallogenic period was magmatic in origin, and the second period was hydrothermal in origin. The initial ore-forming age of the Kawuliuke Fe–P–Ti mineralisation was ca 814?Ma and the second one was ca 771?Ma. On the other hand, the ore-forming ages of the Qieganbulake and Duosike deposits were ca 810?Ma and ca 841?Ma, respectively. Qieganbulake and Duosike deposits were of magmatic origin. Combined with previous geochronological data and the research on the tectonic background, we infer that the Kawuliuke, Qieganbulake and Duosike Fe–P–(Ti)-oxide deposits were formed in a subduction-related tectonic setting and were the product of subduction-related magmatism.  相似文献