Residual compressive strength of inclined steel tubular members with local corrosion     

《Applied Ocean Research》2016

In jacket-type offshore structures, corrosion damage affects the structural performance under compressive loading, which is created by the working and design loads of the main system. In this study, the effects of corrosion damage on the compressive structural behavior and strength of steel tubular members were investigated. Artificial corrosion damage was applied to the tubular specimens via mechanical processing and hand drilling to replicate the inclined nature of jacket-type offshore structures. The damage was applied to either half or all of the circumference of the specimens. The compressive failure modes of the artificially corroded tubular members were affected by the corrosion conditions. The compressive strengths were also affected by the level of corrosion. From the results of this study, the residual compressive strengths of corroded tubular steel members can be estimated based on the condition of the damaged sectional areas.  相似文献   

全珊瑚骨料海水混凝土力学性能试验研究   总被引：3，自引：1，他引：2  

糜人杰  余红发  麻海燕  达波  袁银峰  张小平  朱海威  窦雪梅 《海洋工程》2016,34(4):47-54

为了探讨全珊瑚骨料海水混凝土的基本力学性能,并比较其与普通混凝土和轻集料混凝土的差异,通过实验系统测定了珊瑚混凝土的基本力学性能,建立了其轴心抗压强度(f_(c,m))、劈裂抗拉强度(f_(sp,m))、抗折强度(f_(t,m))与立方体抗压强度(f_(cu,m))之间的线性关系与计算公式。结果表明:在强度等级C20~C50的范围内,珊瑚混凝土的f_(c,m)和f_(sp,m)分别比普通混凝土的f_(c,m)和f_(sp,m)高出10%~48%和9%~33%,随着强度等级的提高,两种混凝土之间的差距在减小。珊瑚混凝土的f_(t,m)与普通混凝土的ft,m之间的差异规律与强度等级有关,较低强度等级的C30珊瑚混凝土ft,m比普通混凝土的f_(t,m)要高4%,而较高强度等级的C55珊瑚混凝土f_(t,m)比普通混凝土的f_(t,m)低13%。较高强度等级的C50珊瑚混凝土f_(c,m)、f_(sp,m)和f_(t,m)分别比页岩陶粒轻集料混凝土的f_(c,m)、f_(sp,m)和f_(t,m)低11%、0.9%和4%。  相似文献   

锈蚀钢筋在疲劳荷载作用下压磁场分布研究     

金伟良  周峥栋  毛江鸿  张军  崔磊  潘崇根 《海洋工程》2016,34(5):65-72

针对锈蚀钢筋的疲劳损伤与寿命评估中的难度大、精度低等问题,引入压磁检测技术,对锈蚀钢筋疲劳过程中的压磁场分布进行检测,从宏观与微观相结合的角度分析压磁场分布与疲劳损伤之间的联系。试验结果表明,锈蚀钢筋的压磁场分布能够反映疲劳损伤的演变规律,疲劳后期非线性特征加剧,锈蚀率及应力幅越大则变化越为明显,磁感强度值、磁场分布梯度、"反转"现象等均有助于进行疲劳损伤评价与寿命预测。研究结果可为压磁无损检测技术在钢筋混凝土结构中的应用提供依据。  相似文献   

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines     

苏晨亮  李昕  周晶 《海洋工程》2016,(1):69-82

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.  相似文献   

腐蚀管道在内压和轴向压力影响下的弯曲破坏     

高杰  李昕  周晶 《海洋工程》2016,34(6):74-82

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。  相似文献   

The Effect of Concrete Deformation on Displacement of an Axially Loaded Drilled Shaft     

Dongwook Kim  Hobi Kim  Kyung Joon Shin 《Marine Georesources & Geotechnology》2016,34(2):116-126

This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts.  相似文献   

坑式钢管静压桩在地基加固中的应用     

周军怀  李向阳  柴卓 《探矿工程》2018,45(11):56-59

坑式钢管静压桩是解决既有建筑物因软弱土层地基产生沉降变形的一种技术方法。针对山西北化关铝化工有限公司质检楼地基沉降变形及工程地质条件,提出了采用坑式钢管静压桩进行加固处理的设计方案,介绍了坑式钢管静压桩施工方案和施工流程及注意事项;总结了施工过程中遇到的问题,并对施工后的监测数据进行了分析。结果表明,坑式钢管静压桩施工对软弱地基加固效果良好,可成功地解决软弱土层产生的地基沉降开裂问题。  相似文献   

护坡桩+微型钢管桩复合土钉墙联合支护体系研究应用          下载免费PDF全文

孙剑  范民浩  李鑫 《探矿工程》2021,48(10):116-124

本文提出了一种新的联合支护体系——护坡桩+微型钢管桩复合土钉墙支护体系,成功解决了基坑周边无放坡空间需垂直开挖、基坑深度大、要求位移小、支护费用高等技术难题,做到了施工便利,对控制边坡位移变形、增强边坡整体稳定性、保证在基坑开挖工程中不发生对周围环境的影响具有良好的作用。采用这种支护方式对北京一工程进行设计施工探讨,经工后监测效果良好,大大地提高了边坡的安全稳定性,从而验证了这一支护形式的可行性,其在深基坑支护中具有常规土钉墙和护坡桩无法相比的技术与经济优势,可供其他类似工程参考,具有较高的适用推广价值。  相似文献   

进口爆破孔钻机配套钻塔的研制          下载免费PDF全文

张西坤  宋秋锋  申寿长  刘大仲  浦静怡  曹继玉  魏少军 《探矿工程》2021,48(6):80-86

进口DMH90型爆破孔钻机配套钻塔整体性强,起落塔快捷方便,钻塔高度满足不换杆一次成孔,即钻塔有效高度略大于钻孔深度,承受振动冲击力大,施工工作环境恶劣。基于这些特点和难点,爆破塔长期依赖进口,导致成本增高、周期加长,为此进行了进口DMH90型爆破孔钻机配套钻塔的替代进口研究工作。本文介绍了DMH90型爆破孔钻机配套ZT27-45型爆破孔钻塔的研制过程,主要对ZT27-45型爆破孔钻塔的设计要点、结构型式、塔体选材、焊接工艺、防止变形、消除应力、质量检验等方面进行了探索、试验和总结。生产施工实践表明,ZT27-45型钻塔制造质量达到了设计要求,满足爆破孔施工的需要,实现了替代进口,达到了降低成本、缩短工期和提高机械性能的目的。  相似文献   

Bearing capacity of strip foundations reinforced with geogrid sheets by using upper bound finite‐element limit analysis     

Jyant Kumar  Jagdish Prasad Sahoo 《国际地质力学数值与分析法杂志》2013,37(18):3258-3277

By using the upper bound finite‐elements limit analysis, with an inclusion of single and two horizontal layers of reinforcements, the ultimate bearing capacity has been computed for a rigid strip footing placed over (i) fully granular, (ii) cohesive‐frictional, and (iii) fully cohesive soils. It is assumed that (i) the reinforcements are structurally strong so that no axial tension failure can occur, (ii) the reinforcement sheets have negligible resistance to bending, and (iii) the shear failure can take place between the reinforcement and soil mass. It is expected that the different approximations on which the analysis has been based would generally remain applicable for reinforcements in the form of geogrid sheets. A method has been proposed to incorporate the effect of the reinforcement in the analysis. The efficiency factors, η_c and η_γ, to be multiplied with N_c and N_γ , for finding the bearing capacity of reinforced foundations, have been established. The results have been obtained (i) for different values of ? in case of fully granular and cohesive‐frictional soils, and (ii) for different rates at which the cohesion increases with depth for a fully cohesive soil. The optimum positions of the reinforcements' layers have also been determined. The effect of the reinforcements' length on the results has also been analyzed. As compared to cohesive soils, the granular soils, especially with higher values of ?, cause a much greater increase in the bearing capacity. The results compare reasonably well with the available theoretical and experimental data from literature. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献