闽东干旱概况及夏季人工增雨作业天气形势分析     

陈德汶  王金萍  林友爱  刘锐志  陈安芳 《气象科技》2005,(Z1)

对闽东干旱的成因和干旱的环流形势进行了探讨,着重分析了夏旱期间人工增雨作业的天气形势以及不同形势、不同云型下的降水情况。结果表明:闽东干旱的形成与大型环流形势、地理因素、土壤植被等有关,平均而言,沿海干旱明显多于内陆山区;夏季发生干旱的机率最大而且强度级别高,西太平洋副热带高压是致旱的主要天气系统;在夏季,台风型(T)、弱流场型(R)是进行人工增雨作业的优势天气型,Cb、Cu、Sc云是开展人工增雨作业比较适合的作业云。这些结果为夏旱期间开展人工增雨作业提供了理论依据。  相似文献   

Slow mass movement in the Kangchenjunga area, eastern Nepal Himalaya     

Dhananjay  Regmi  Teiji  Watanabe 《Island Arc》2005,14(4):400-409

Abstract   The rates of the accumulated and continuous displacement of solifluction lobes in the Kangchenjunga area, eastern Nepal Himalaya, were determined using glass fiber tubes and a strain probe. Ground temperature, precipitation and soil moisture were monitored at two sites, whose altitude differed by approximately 100 m, to understand the solifluction process. The average movement rate of the glass fiber tubes on a 31° slope at altitudes of 5412–5414 m a.s.l. was approximately 11 mm/year, being almost threefold greater than that observed on a 22° slope at 5322–5325 ma.s.l. There was no significant difference in the depth of displacement at these sites. The continuous displacement measurement near the ground surface at 5414 m showed permanent downslope movement from early July. Such movement may be attributed to additional moisture supply during the monsoon season. The amplitude of the displacement cycle was highest at the ground surface, and decreased to virtually zero at and below 20 cm in depth. Probable factors leading to the relatively slow rates of downslope displacement at the surface and depth at the studied altitudes are the lack of concurrence of the freeze–thaw cycles and the high moisture condition in the soil, and the low moisture retention capacity of the soil because of steep slopes and superficial desiccation. The rate of displacement may be more pronounced at altitudes above 5600 m because of the freeze–thaw cycles during the summer season.  相似文献   

锦州地震台体积式钻孔应变仪的映震情况     

明成山  李京锦  李哲 《地震地磁观测与研究》2005,(Z1)

论述了张北MS6.2、沈阳ML4.1、内蒙古ML5.9、日本北海道MS8.0、俄蒙中交界MS7.9、青海昆仑山MS8.1地震前后,锦州地震台体积式钻孔应变仪观测震前异常的变化规律。通过计算潮汐因子、振幅因子、3点线性平滑滤波残差值等方法,识别异常。结果表明,体应变异常资料与地震有一定的相关性。  相似文献   

Strain accumulation in sand due to cyclic loading: drained triaxial tests     

T. Wichtmann  A. Niemunis  Th. Triantafyllidis   《Soil Dynamics and Earthquake Engineering》2005,25(12):967-979

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.  相似文献   

Tidal Stress/Strain and the b-values of Acoustic Emissions at the Underground Research Laboratory, Canada     

Takaki Iwata  R. Paul Young 《Pure and Applied Geophysics》2005,162(6-7):1291-1308

The correlation between the b-values of acoustic emissions (AEs) and the phase of the moon was investigated at the Underground Research Laboratory (URL) in Canada. The same data as those used in Iwata (2002) were examined, which showed that the occurrence of AEs is correlated with the phase of the moon. It was expected, therefore, that the b-value of the AEs would also be sensitive to tidal stress/strain fluctuations. We investigated the variation of the b-values as a function of the phase of the moon. Results show that b-values immediately following the times of full/new moon are higher than those at other times. Using AIC (Akaike Information Criterion) and random (Monte Carlo) simulations, it was confirmed that this feature is statistically significant. We also investigated whether or not there was a change in the b-values immediately before the times of full/new moon, but no statistically significant change was observed. The results suggest that the effect of stress/strain fluctuations on AE occurrences at the URL is asymmetric to the times of full/new moon.All authors are members of the Academic Robotics Group. In listing The Academic Robotics Group, the authors are endeavoring to place each of the participant institutions on an equal footing in terms of effort and authorship. M. A. Talamini is serving as presenter.  相似文献   

Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples     

Sandro Fadda 《Geostandards and Geoanalytical Research》2005,29(1):143-156

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.  相似文献   

形变数字化观测曲线畸变与处理——兼论资料预处理中遇到的一些问题     

黄晓华 《福建地震》2005,(4)

数字化形变台站日常下载、处理直至管理数据,都应用《数字化通讯控制软件》、《形变前兆台站(网)数据处理系统》及《形变前兆数据库服务软件(台站版)》等三个软件交互进行,在实际使用过程中会遇到一些棘手的问题。本文结合我台的观测工作的实践,总结经验,以供台站同行共享。  相似文献   

浅析福建地倾斜潮汐因子γ及其组合动态特征     

傅再扬  危福泉  吴绍祖  陈光 《福建地震》2005,(Z1)

本文计算了福建自1992年至2004年以来的地倾斜EW和NS两分量的固体潮潮汐因子,并进行动态组合,绘制组合动态三种特征量:ΔγEW ΔγNS(表征扩容)、ΔγEW-ΔγNS(表征剪切应变)、ΔγEW/ΔγNS(表征介质各向异性)的时序曲线图,并进行固体潮特征分析,寻找中、强地震发生前远场块体和近场块体地倾斜突变性形变异常与之对应关系。结果表明:在福建沿海,海潮是决定倾斜固体潮特征的主要因素;福建发生5级上的中强地震、台湾发生7级以上强烈地震时,福建地倾斜固体潮潮汐因子及其动态组合特征存在明显的渐进式突变性形变异常现象,异常量和异常持续时间与震级和震中距有较好的对应关系。  相似文献   

Prediction of creep characteristic of rock under varying environment   总被引：2，自引：0，他引：2  

T. N. Singh  A. K. Verma 《Environmental Geology》2005,48(4-5):559-568

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.  相似文献   

Experimental determination of REE partition coefficients between zircon,garnet and melt: a key to understanding high‐T crustal processes          下载免费PDF全文

R. J. M. Taylor  S. L. Harley  R. W. Hinton  S. Elphick  C. Clark  N. M. Kelly 《Journal of Metamorphic Geology》2015,33(3):231-248

The partitioning of rare earth elements (REE) between zircon, garnet and silicate melt was determined using synthetic compositions designed to represent partial melts formed in the lower crust during anatexis. The experiments, performed using internally heated gas pressure vessels at 7 kbar and 900–1000 °C, represent equilibrium partitioning of the middle to heavy REE between zircon and garnet during high‐grade metamorphism in the mid to lower crust. The D_REE (zircon/garnet) values show a clear partitioning signature close to unity from Gd to Lu. Because the light REE have low concentrations in both minerals, values are calculated from strain modelling of the middle to heavy REE experimental data; these results show that zircon is favoured over garnet by up to two orders of magnitude. The resulting general concave‐up shape to the partitioning pattern across the REE reflects the preferential incorporation of middle REE into garnet, with D_Gd (zircon/garnet) ranging from 0.7 to 1.1, D_Ho (zircon/garnet) from 0.4 to 0.7 and D_Lu (zircon/garnet) from 0.6 to 1.3. There is no significant temperature dependence in the zircon–garnet REE partitioning at 7 kbar and 900–1000 °C, suggesting that these values can be applied to the interpretation of zircon–garnet equilibrium and timing relationships in the ultrahigh‐T metamorphism of low‐Ca pelitic and aluminous granulites.  相似文献