面向WebGL的矢量数据三维绘制技术     

欧阳峰  龚桂荣  何列松 《测绘科学技术学报》2016,(6)

矢量数据的叠加显示能够提高三维虚拟地球的表达效果与分析能力。受限于GPU的计算精度,在三维虚拟地球中矢量数据绘制普遍存在抖动现象和深度冲突现象。对基于WebGL的矢量数据三维绘制中计算精度问题进行了分析,提出了使用CPU RTC技术和GPU RTE技术提高顶点变换的精度,使用多视锥渲染算法和深度平面技术解决深度缓存精度问题。实验证明,这几种技术和算法可以有效缓解抖动现象和深度冲突现象导致的视觉干扰,改善了各种尺度和范围的矢量数据在三维地形上的叠加显示效果。  相似文献   

Smoothing and re-roughening processes: The geometric evolution of a single fault zone     

《Journal of Structural Geology》2016

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.  相似文献   

Emplacement of sandstone intrusions during contractional tectonics     

《Journal of Structural Geology》2016

  相似文献   

一种改进的基于 BDS 三频非差观测的周跳实时探测与修复模型     

高杰  谢建涛 《测绘工程》2016,25(12):25-31

BDS三频观测条件下可以组合得到具有优良特性的虚拟载波观测量,有利于改善非差观测数据的周跳实时探测与修复。文中提出一种基于BDS三频非差数据的周跳实时探测与修复模型:首先,采用消电离层无几何HMW组合观测量探测和修复EWL周跳;然后,将经过修复的EWL观测量与WL组合消除几何相关项,忽略电离层延迟残差进而确定WL周跳;最后采用经过修复的WL观测量与NL组合形成无几何观测量,并通过优化载波相位组合确定电离层延迟的变化量以探测和计算NL周跳,并通过简单变换得到原始载波观测量的周跳值。通过实测BDS三频数据对模型可行性进行验证分析,结果表明,即使在30s的采样率以及电离层活动活跃条件下,该模型都可有效实时探测和修复各类周跳。  相似文献   

双频BDS实时精密单点定位算法和精度分析     

刘国仕  薛建华  付文举 《测绘科学》2016,41(10):44-47

为了对BDS实时精密单点定位性能进行评估,该文提出了一种适用于BDS系统的实时精密单点定位算法。采用无电离组合模型作为双频实时精密单点定位的数学模型,采用电离层残差法和Melbourne-Wübbena组合实时探测相位周跳,进而单历元实时估计坐标、模糊度等参数,实现了BDS双频实时精密单点定位算法。基于此算法,采用轨道钟差产品和采样间隔为1s的观测数据,模拟实时BDS双频精密单点定位算法,并评估其定位精度。实验结果表明:BDS双频实时定位的平面精度和三维精度均为0.2m左右。  相似文献   

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China   总被引：1，自引：1，他引：0  

ZHANG Yongshuang  YAO Xin  YU Kai  DU Guoliang  and GUO Changbao 《《地质学报》英文版》2016,90(2):525-536

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.  相似文献   

受控定向钻进技术在福建马坑矿区的应用          下载免费PDF全文

邹道全 《探矿工程》2016,43(1):70-74,80

重点介绍了福建马坑矿区ZK8321分支孔受控定向钻进技术。施工中运用了国内先进的螺杆钻造斜技术及光纤陀螺测量定向技术,避开上部复杂孔段（松散破碎层、溶洞地层、采空区等）及对勘探工作的影响,达到了施工目的;总结了施工技术难点与措施,分析了施工技术效果,积累了宝贵的施工经验。  相似文献   

走滑断裂古地震探槽选址范例   总被引：1，自引：1，他引：0  

袁兆德  刘静  李占飞  邵延秀  李志刚  王鹏  王伟  姚文倩 《地质通报》2016,35(11):1807-1828

探槽选址直接决定了古地震研究的质量,且理想探槽位置具有稀缺性。在收集82篇国内外走滑断裂古地震研究论文的基础上,分析了长序列古地震探槽选址和同震位移探槽选址的构造地貌共性特征。长序列古地震探槽一般布设在断塞塘、拉分盆地、小型湖盆、闸门脊汇水一侧及比较平缓的冲洪积扇或大型冲洪积扇末端等地貌位置。这些地貌位置的共同特征是位于连续的、较高沉积速率的沉积环境,且通常富集14C测年物质。在探槽选址的过程中,不仅要对现今沉积环境,也要对其古地理环境进行评价。然而以发掘古地震同震位移为目的的探槽选址则不同,成功的研究点往往较频繁发生侵蚀和下切事件,其中冲沟是最常见的地貌标志。探槽布设以垂直和平行探槽为主,采取逐次掘进或相间平行排列的方式开挖。由于理想探槽位置的稀缺性,所以在这些优质的探槽点一定要开展长期详细地深入研究,最大限度获得古地震事件的长序列,同时也要注意新技术和新方法的应用。  相似文献   

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?     

Sarfraz KHAN  Umair Bin NISAR  Khawar A. AHMED  Muhammad WASEEM  Waqas AHMED 《《地质学报》英文版》2018,92(4):1544-1557

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.  相似文献   

Neotectonics of the Kharaulakh sector of the Laptev Shelf     

V.S. Imaev  L.P. Imaeva  O.P. Smekalin  A.V. Chipizubov  A.N. Ovsyuchenko  I.I. Kolodeznikov 《Russian Geology and Geophysics》2018,59(7):813-826

Seismotectonic deformation and crustal stress pattern have been studied comprehensively in major seismogenic structures of the Kharaulakh sector of the Verkhoyansk fold system and adjacent parts of the Chersky seismotectonic zone. The study focuses on neotectonic structures, deep structure, and systems of active faults, as well as tectonic stress fields inferred by tectonophysical analysis of Late Cenozoic faults and folds. The results, along with geological and geophysical data, reveal main strain directions and structural patterns of crustal stress and strain in the Arctic segment of the Eurasia-North America plate boundary. The area is a junction of mid-ocean and continental structures evolving in a mixed setting of extension, compression, and their various combinations. The rotation pole of the two plates is presumably located near Buor-Khaya Bay. In this case, extension is expected to act currently upon the neotectonic structures north of the bay and compression to control those in the south and southeast. This inference is consistent with the identified zoning of stress and strain in the Kharaulakh sector.  相似文献