Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength   总被引：2，自引：0，他引：2  

S. Okubo  K. Fukui  Qi Qingxin 《International Journal of Coal Geology》2006,68(3-4):196-204

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.  相似文献   

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses     

LI Hong-jun  CHI Shi-chun  LIN Gao 《岩土力学》2006,27(Z1):1063-1068

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.  相似文献   

Strain softening of K0-consolidated Changi sand under plane-strain conditions     

D. Wanatowski  J. Chu 《Acta Geotechnica》2006,1(1):29-42

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).  相似文献   

Assessment of Marine Clay Improvement Under Reclamation Fills by in-situ Testing Methods     

A. Arulrajah  H. Nikraz  M. W. Bo 《Geotechnical and Geological Engineering》2006,24(2):219-226

In ground improvement projects with prefabricated vertical drains, the duration of the preloading period is set in advance based on the predetermined time rate of consolidation of the compressible layer. If prediction is accurately done, the required degree of consolidation is met at the pre-determined preloading time. As such, there is a requirement for in-situ tests to be carried out just prior to the removal of surcharge to assess the degree of consolidation of the improved ground. In-situ tests were carried out after 23 months of surcharge loading at the In-Situ Test Site within the Changi East Reclamation Project in the Republic of Singapore. In-situ testing works in this research study comprises the use of field vane shear, piezocone, flat dilatometer and self-boring pressuremeter. The in-situ tests were carried out to determine the shear strength and degree of consolidation of the Singapore marine clay at Changi after 23 months of surcharge loading. The In-Situ Test Site consisted of a Vertical Drain Area as well as an untreated Control Area. Both areas were located adjacent to each other and were surcharged simultaneously to the same level and surcharge left in place for a period of 23 months. Comparison was made between the in-situ test results of the Vertical Drain Area and the untreated Control Area.  相似文献   

用强度折减法和FLAC^3D计算边坡的安全系数   总被引：4，自引：0，他引：4  

李新坡陈永波  王永杰何思明 王成华 《山地学报》2006,24(B10):235-239

对采用强度折减法和FLAC^3D计算边坡的安全系数问题进行了研究。对边坡破坏的判断标准、边坡滑面位置的确定及计算参数对安全系数计算结果的影响进行了分析。结果表明，用FLAC计算时，边坡的破坏可以通过节点最大不平衡力突变、节点最大速度突变、特定点位移的不收敛等特征进行判断，同时边坡破坏的滑面也可以由速度等值线图等方法表示出来。另外，通过分析发现，弹性常数、剪胀角等参数对安全系数计算结果的影响不大。  相似文献   

Compressibility and shear strength of a residual soil     

Yahia E.-A. Mohamedzein  Mohammed H. Aboud 《Geotechnical and Geological Engineering》2006,24(5):1385-1401

A detailed study was performed to investigate the compressibility and the shear strength of a residual soil in Omdurman, Sudan. The soil resulted from weathering of sandstone and mudstone. The soil is classified as sandy clayey silt (MH-CH) and is generally partially saturated. Consolidation tests were performed to study the compressibility of the soil and UU, CIU and insitu tests (CPT and SPT) were performed to study the shear strength characteristics of the soil. The characteristics of this residual soil can generally be predicted using correlations proposed in the literature for transported soils. The soil is of low to medium compressibility and exhibits slight apparent overconsolidation behavior. The soil dilates during shear and shows no long term effective cohesion. Problems associated with open cuts in this soil are attributed to loss of strength upon saturation.  相似文献   

Spectral Simulation and Conditioning to Local Continuity Trends in Geologic Modeling     

Tingting Yao  Craig Calvert  Tom Jones  Glen Bishop  Yuan Ma  Lincoln Foreman 《Mathematical Geology》2006,38(1):51-62

Spectral simulation has gained application in building geologic models due to the advantage of better honoring the spatial continuity of petrophysical properties, such as reservoir porosity and shale volume. Distinct from sequential simulation methods, spectral simulation is a global algorithm in the sense that a global density spectrum is calculated once and the inverse Fourier transform is performed on the Fourier coefficient also only once to generate a simulation realization. The generated realizations honor the spatial continuity structure globally over the whole field instead of only within a search neighborhood, as with sequential simulation algorithms. However, the disadvantage of global spectral simulation is that it traditionally cannot account for the local information such as the local continuity trends, which are often observed in reservoirs and hence are important to be accounted for in geologic models. This disadvantage has limited wider application of spectral simulation in building geologic models. In this paper, we present ways of conditioning geologic models to the relevant local information. To account for the local continuity trends, we first scale different frequency components of the original model with local-amplitude spectrum ratios that are specific to the local trend. The sum of these scaled frequency components renders a new model that displays the desired local continuity trend. The implementation details of this new method are discussed and examples are provided to illustrate the algorithm.  相似文献   

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization     

Evangelos I. Stavridakis 《Geotechnical and Geological Engineering》2006,24(2):379-398

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.  相似文献   

岩石三轴强度试验   总被引：2，自引：0，他引：2  

李广平王玉玲  蔡玉贞 《岩矿测试》2005,24(1):75-78

通过自制岩石三轴压力室和配备液压泵与现有万能材料试验机组成岩石三轴试验系统，进行岩石三轴强度试验研究，并与其它方法比对，结果相近，满足了科研和生产的需要。  相似文献   

利用LPAC图分析北半球夏半年环流季节转换及异常     

蔡新玲王盘兴  杜继稳刘子臣 《南京气象学院学报》2005,28(5):710-716

用NCEP／NCAR再分析月平均风、压场资料得到1958—1997年5—10月月际场的局地型相似系数（LPAC）。多年平均LPAC表明了对流层和平流层低层印度夏季风环流的建立、东亚夏季风环流的北进和南亚高压上高原的过程，这些区域LPAC值较同纬度非季风区明显偏低。在平流层中层，夏季型环流表现出纬向对称性和由高纬向低纬的传播特征。对东亚LPAC气候变率时空剖面及3个涝年LPAC异常的分析反映出环流型季节转变异常及其与东亚月降水异常的关系。  相似文献