西藏札达盆地控盆断裂有限元数值模拟   总被引：1，自引：0，他引：1  

段岩  孟宪刚  邵兆刚  朱大岗 《地质通报》2008,27(10)

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。  相似文献   

VC环境下最短路径算法的实现   总被引：1，自引：0，他引：1  

刘少华  王新海 《地理空间信息》2008,6(2):36-37

设计了一种方便查找及显示最短路径的数据结构,对仅研究计算一条最短路径的Dijkstra算法加以了改进,并在VC下实现一个顶点到另一个顶点的所有最短路径的查找。  相似文献   

北大别饶拔寨石榴辉石岩P-T-t轨迹及其构造意义     

闫方超  刘庆  马雪盈  何苗 《岩石学报》2021,37(8):2579-2598

P-T-t轨迹作为变质岩的重要研究方法之一，对揭示岩石的构造演化过程具有重要意义。北大别饶拔寨镁铁-超镁铁岩形成的构造环境和就位过程长期以来尚存争议。本文通过岩相学观察、矿物化学研究和温压计计算，揭示出饶拔寨石榴辉石岩经历了四个变质演化阶段：1）超高压变质阶段（M1）：主要根据石榴子石中金红石的出溶，单斜辉石中石英的出溶和磷灰石中不透明矿物的出溶，结合前人研究，认为饶拔寨石榴辉石岩经历过超高压变质阶段（≥2.5GPa）；2）高压麻粒岩相阶段（M2）：矿物组合为石榴子石（变斑晶）和单斜辉石（基质）+斜长石（基质），记录的温压条件为T=648~700℃，P=1.47~1.94GPa；3）中压麻粒岩相阶段（M3）：以石榴子石外围发育的主要由斜方辉石+斜长石组成的内圈"白眼圈"为特征，形成的温压条件为T=781~796℃，P=0.92~0.98GPa；4）角闪岩相阶段（M4）：以石榴子石变斑晶周围发育的外圈"白眼圈"为特征，其矿物组合为角闪石+斜长石的后成合晶，形成的温压条件为T=663~685℃，P=0.50~0.58GPa。石榴辉石岩的锆石SIMS U-Pb定年得到了3组不同的交点年龄，分别为208.1~202.1Ma、227.6Ma和817.7Ma。根据锆石包裹体中角闪石+斜长石的组合，推断208.1~202.1Ma代表了角闪岩相变质年龄的下限，227.6Ma则是高压麻粒岩相的下限年龄，而新元古代年龄（817.7Ma）与区域上的变质岩原岩年龄一致，可能代表了其原岩年龄。结合前人研究，饶拔寨石榴辉石岩记录了顺时针的P-T-t轨迹，揭示了板片俯冲（超高压变质）-碰撞-折返（降压升温过程，~227Ma）-抬升（降压降温过程，208~202Ma）的完整过程。  相似文献   

On　the　physical　model　of　earthquake　precursor　fields　and　the　mechanism　of　precursors＇timespace　distribution──origin　and　evidences　of　the　strong　body　earthquake──generating　model     

梅世蓉 《地震学报(英文版)》1995,(3)

Ｏｎｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌｏｆｅａｒｔｈｑｕａｋｅｐｒｅｃｕｒｓｏｒｆｉｅｌｄｓａｎｄｔｈｅｍｅｃｈａｎｉｓｍｏｆｐｒｅｃｕｒｓｏｒｓ＇ｔｉｍｅｓｐａｃｅｄｉｓｔｒｉｂｕｔｉｏｎ──ｏｒｉｇｉｎａｎｄｅｖｉｄｅｎｃｅｓｏｆ　ｔｈｅｓｔｒｏｎ...  相似文献   

中国三个大地震的震源参数及讨论   总被引：1，自引：0，他引：1       下载免费PDF全文

卓钰如 Kanam.  H 《地球物理学报》1990,33(4):489-496

大地震的震源机制及地震矩、应力降等参数,不(又对认识地震的破裂过程,而且对预报强地面运动都是非常重要的。一些文章对板内地震应力降的特点、地震矩与高频源谱的关系及区域特征的讨论,使我们可直接由长周期体波或面波得出的地震矩M₀估计出不同地区中大地震的高频源谱,以供强地面运动预报参考。 由于对发生在中国板内的1976年11月6日盐源地震（M_s=6.5）和1976年11月15日宁河地震（M_s=6.3）的震源参数还没有详尽的报道;另外,对1973年7月14日  相似文献   

Large eddy simulation of hydrocyclone—prediction of air-core diameter and shape     

M. Narasimha  Mathew Brennan  P.N. Holtham 《International Journal of Mineral Processing》2006

Hydrocyclones are widely used in the mining and chemical industries. An attempt has been made in this study, to develop a CFD (computational fluid dynamics) model, which is capable of predicting the flow patterns inside the hydrocyclone, including accurate prediction of flow split as well as the size of the air-core. The flow velocities and air-core diameters are predicted by DRSM (differential Reynolds stress model) and LES (large eddy simulations) models were compared to experimental results. The predicted water splits and air-core diameter with LES and RSM turbulence models along with VOF (volume of fluid) model for the air phase, through the outlets for various inlet pressures were also analyzed. The LES turbulence model led to an improved turbulence field prediction and thereby to more accurate prediction of pressure and velocity fields. This improvement was distinctive for the axial profile of pressure, indicating that air-core development is principally a transport effect rather than a pressure effect.  相似文献   

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern   总被引：2，自引：0，他引：2  

Huai-zhong Yu  Zheng-kang Shen  Yong-ge Wan  Qing-yong Zhu  Xiang-chu Yin   《Tectonophysics》2006,428(1-4):87-94

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.  相似文献   

Variability in Early Amazonian Tharsis stress state based on wrinkle ridges and strike-slip faulting     

Chris H. Okubo  Richard A. Schultz   《Journal of Structural Geology》2006,28(12):2169

We present evidence for a decrease in the magnitude of Tharsis-circumferential compressive stress during the Late Hesperian to the Middle Amazonian based on chronologic changes in the predominant style of faulting in southern Amazonis Planitia. Using high-resolution MOLA topography, we identify a population of strike-slip faults that exhibit Middle Amazonian-aged displacements of regional chrono-stratigraphic units. These strike-slip faults are adjacent to an older population of previously documented Late Hesperian-aged thrust faults (wrinkle ridges). Along-strike orientations of these thrust and strike-slip faults reveal the Tharsis-radial stress to be the area's most compressive remote principal stress and that this stress orientation and magnitude persisted throughout the Late Hesperian to the Middle Amazonian. We show that the change in the predominant style of faulting from thrust faulting to strike-slip faulting during this time requires a decrease of the Tharsis-circumferential compressive stress to a magnitude less than lithostatic load, with negligible change in stress orientation.  相似文献   

Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan   总被引：1，自引：1，他引：1  

Sadaki Hori 《Tectonophysics》2006,417(1-2):85

The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.  相似文献   

冲击凿岩钎杆的瞬态动力学分析          下载免费PDF全文

周晔  张国榉 《探矿工程》2006,33(9):46-48

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。  相似文献