Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength   总被引：2，自引：0，他引：2  

S. Okubo  K. Fukui  Qi Qingxin 《International Journal of Coal Geology》2006,68(3-4):196-204

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.  相似文献   

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses     

LI Hong-jun  CHI Shi-chun  LIN Gao 《岩土力学》2006,27(Z1):1063-1068

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.  相似文献   

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps     

Martin Putz  Kurt Stüwe  Mark Jessell  Philippe Calcagno   《Tectonophysics》2006,412(1-2):87-103

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.  相似文献   

Strain softening of K0-consolidated Changi sand under plane-strain conditions     

D. Wanatowski  J. Chu 《Acta Geotechnica》2006,1(1):29-42

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).  相似文献   

Assessment of Marine Clay Improvement Under Reclamation Fills by in-situ Testing Methods     

A. Arulrajah  H. Nikraz  M. W. Bo 《Geotechnical and Geological Engineering》2006,24(2):219-226

In ground improvement projects with prefabricated vertical drains, the duration of the preloading period is set in advance based on the predetermined time rate of consolidation of the compressible layer. If prediction is accurately done, the required degree of consolidation is met at the pre-determined preloading time. As such, there is a requirement for in-situ tests to be carried out just prior to the removal of surcharge to assess the degree of consolidation of the improved ground. In-situ tests were carried out after 23 months of surcharge loading at the In-Situ Test Site within the Changi East Reclamation Project in the Republic of Singapore. In-situ testing works in this research study comprises the use of field vane shear, piezocone, flat dilatometer and self-boring pressuremeter. The in-situ tests were carried out to determine the shear strength and degree of consolidation of the Singapore marine clay at Changi after 23 months of surcharge loading. The In-Situ Test Site consisted of a Vertical Drain Area as well as an untreated Control Area. Both areas were located adjacent to each other and were surcharged simultaneously to the same level and surcharge left in place for a period of 23 months. Comparison was made between the in-situ test results of the Vertical Drain Area and the untreated Control Area.  相似文献   

用强度折减法和FLAC^3D计算边坡的安全系数   总被引：4，自引：0，他引：4  

李新坡陈永波  王永杰何思明 王成华 《山地学报》2006,24(B10):235-239

对采用强度折减法和FLAC^3D计算边坡的安全系数问题进行了研究。对边坡破坏的判断标准、边坡滑面位置的确定及计算参数对安全系数计算结果的影响进行了分析。结果表明，用FLAC计算时，边坡的破坏可以通过节点最大不平衡力突变、节点最大速度突变、特定点位移的不收敛等特征进行判断，同时边坡破坏的滑面也可以由速度等值线图等方法表示出来。另外，通过分析发现，弹性常数、剪胀角等参数对安全系数计算结果的影响不大。  相似文献   

Spontaneous Structural Reform in Australian Local Government: the case of the Gilgandra Co-operative Model in New South Wales     

Brian Dollery  Warrick Moppett  Lin Crase 《The Australian geographer》2006,37(3):395-409

Dire financial constraints and the threats of forced structural reform have had the unforeseen effect of forcing municipal councils across Australia to reconsider their operational activities and organisational arrangements. With considerable ingenuity, numerous municipalities have proposed and sometimes adopted new structural formations that embody various forms of co-operative service provision. This remarkable development has unfortunately been largely ignored in the scholarly literature on Australian local government. In a modest effort aimed at remedying this neglect, the present paper seeks to outline the small, rural New South Wales Gilgandra Shire Council's (2004) ‘Co-operative/Local Government Service Company’ model, place it in the broader context of alternative models of local governance suitable for Australian conditions, and evaluate its characteristics.  相似文献   

Compressibility and shear strength of a residual soil     

Yahia E.-A. Mohamedzein  Mohammed H. Aboud 《Geotechnical and Geological Engineering》2006,24(5):1385-1401

A detailed study was performed to investigate the compressibility and the shear strength of a residual soil in Omdurman, Sudan. The soil resulted from weathering of sandstone and mudstone. The soil is classified as sandy clayey silt (MH-CH) and is generally partially saturated. Consolidation tests were performed to study the compressibility of the soil and UU, CIU and insitu tests (CPT and SPT) were performed to study the shear strength characteristics of the soil. The characteristics of this residual soil can generally be predicted using correlations proposed in the literature for transported soils. The soil is of low to medium compressibility and exhibits slight apparent overconsolidation behavior. The soil dilates during shear and shows no long term effective cohesion. Problems associated with open cuts in this soil are attributed to loss of strength upon saturation.  相似文献   

洪山预测区煤层赋存的可能性分析     

尚洪田 《中国煤田地质》2006,18(4):25-26,52

分析了洪山预测区西部洪山岩体地质特征及其向外围扩散的范围和程度，研究了北掌勘查区和焦窑煤矿两邻区煤层受岩浆岩影响的程度，认为洪山岩体对预测区煤系及煤层赋存的影响较小，岩体外围仍有煤系赋存。为下一步找煤指明了方向。  相似文献   

吾祠煤矿区构造特征及矿井生产布局探讨     

张钦文 《中国煤田地质》2006,18(5):14-16,37

通过对漳平市吾祠煤矿区的煤层地质构造特征分析，探讨了复杂构造条件下的矿井生产布局，主要是煤矿区段水平划分、煤炭采区的巷道布置、采煤方法及有关地质硐探等问题，对矿山开发有一定的指导意义。  相似文献