福州江滨地区超高层建筑灌注桩成孔工艺分析          下载免费PDF全文

张志刚 《探矿工程》2017,44(6):84-87

以福州江滨地区2个有代表性的超高层建筑桩基础工程实例为依据,通过无卡式冲击 正循环,旋挖 气举反循环,回转 泵吸反循环3种成孔工艺之间的比对,提出了在福州市江滨地区超大粒径厚层卵石与花岗岩地层灌注桩施工成孔工艺方面的一些见解,认为回转 泵吸反循环是较为可靠的工艺。  相似文献   

粉土基质吸力的新型量测装置与土-水特征研究     

王桂尧  李斌  罗军  付宏渊 《岩土力学》2010,31(11):3678-3682

以非饱和土张力计原理为基础,制作了一种新型的基质吸力量测装置,并通过实测过程的不断总结与改进,得到了一种成本低廉、制作简单、操作便利、试验快速和结果可靠的非饱和土基质吸力量测装置,以此装置测定了不同体积含水率、不同压实度和干湿循环后粉土的基质吸力变化规律,得到了不同压实度粉土的土-水特征曲线,并通过Origin软件中的Boltzmann模型进行拟合对比分析,得到了与压实度相关的土-水特征曲线,比较了不同压实度粉土的含水率变化对基质吸力的不同影响特点。试验结果表明,干湿循环对粉土的基质吸力和强度有很大影响。  相似文献   

非饱和含黏砂土的广义土-水特征曲线试验研究   总被引：4，自引：0，他引：4  

苗强强  张磊  陈正汉  黄雪峰 《岩土力学》2010,31(1):102-106

利用非饱和土4联固结仪和非饱和三轴仪,解决了用压力板仪测试土-水特征曲线无法考虑体变、净竖向压力和净平均应力影响的问题,进行了考虑净竖向压力和净平均应力影响的土-水特征曲线研究,对未考虑净竖向压力或净平均应力的土-水特征曲线同考虑净竖向压力或净平均应力的广义土-水特征曲线的试验结果得出,净竖向压力或净平均应力是影响非饱和土土-水特征曲线的重要因素,试验结果与理论公式稳合较好,并结合非饱和理论和试验结果,拟合了可以反映净竖向压力或净平均应力影响的广义土-水特征曲线公式,与试验结果吻合较好。  相似文献   

非饱和土增湿变形的实用计算方法     

刘兰兰  李鸿儒  常秋影  李晓乐  王洪宇  赵传海 《吉林大学学报(地球科学版)》2016,46(6):1790-1798

非饱和土力学研究目前还未进入实用阶段,主要原因在于吸力量测困难。本文提出了用等效吸力代替真实吸力的试验方法。首先以常规静三轴试验得到的原状饱和土以及非饱和土的应力-应变曲线为基础,根据变形等效的原则确定与某一饱和度相当的围压即为等效吸力;然后建立饱和度与等效吸力之间的非线性关系,并验证了该数学公式的正确性;再根据试验结果分析含水量对非饱和土强度的影响,建立了非饱和土的实用抗剪强度公式;最后按照邓肯-张模型的参数整理方法得到了不同饱和度非饱和土的模型参数,探索这些参数随饱和度的变化规律,建立了引入饱和度的非饱和黄土实用非线性模型,并进行了降雨入渗情况下非饱和土增湿变形的计算。结果表明,饱和度最大值为95%,等效吸力最大值为160 kPa,最大水平位移与竖向位移分别为0.6 cm和20.0 cm,均出现在浸水位置。计算结果合理地反映了非饱和土变形的分布趋势,验证了方法的合理性。  相似文献   

失水过程中的土壤孔隙比―含水量―吸力关系     

李旭  林森 《地震工程学报》2011,33(Z1)

当土体总应力状态保持不变时,基质吸力的提高是导致孔隙水排水、土样体积收缩、孔隙结构改变的根本原因,通过吸力可以将土壤收缩曲线和土水特征曲线联系起来进行比对研究。采用广义有效应力原理分析超固结土样和正常土样的失水过程,结果表明:超固结土样中存在着相应的先期固结压力的吸力值,称之为先期固结吸力ψc。当土样吸力小于ψc时,超固结土样和正常固结土样的收缩曲线、土水特征曲线不同:超固结土孔隙比随吸力提高而减小的坡度较缓,约等于土样的回弹再压缩指数,土样处于结构性收缩阶段;先期固结压力越大,土水特征曲线的进气值越高。当土样吸力高于ψc时,超固结土样和正常固结土样的收缩曲线、土水特征曲线重合。  相似文献   

密度对非饱和粘土渗透系数的影响研究   总被引：1，自引：0，他引：1  

李小伟  王世梅  黄净萍 《地震工程学报》2011,33(Z1):214-217,222

取三峡库区某滑坡滑带土制备不同干密度的重塑土样进行饱和渗透试验和非饱和土水特征曲线试验,得到不同干密度重塑土样的土水特征曲线,通过理论公式预测出相应的非饱和渗透系数,进而得到不同干密度重塑土样渗透系数与基质吸力的关系.结果显示:渗透系数随着基质吸力的增大而呈非线性减小,当基质吸力较高时,渗透系数随基质吸力的变化比较小;...  相似文献   

An analytical solution for rainfall infiltration into an unsaturated infinite slope and its application to slope stability analysis   总被引：1，自引：0，他引：1  

Tony L. T. Zhan  G. W. Jia  Y.‐M. Chen  D. G. Fredlund  H. Li 《国际地质力学数值与分析法杂志》2013,37(12):1737-1760

Surficial slope failures in residual soils are common in tropical and subtropical regions as a result of rainfall infiltration. This study develops an analytical solution for simulating rainfall infiltration into an infinite unsaturated soil slope. The analytical solution is based on the general partial differential equation for water flow through unsaturated soils. It can accept soil–water characteristic curve and unsaturated permeability function of the exponential form into account. Numerical simulations are conducted to verify the assumptions of the analytical solution and demonstrate that the proposed analytical solution is acceptable for the coarse soils with low air entry values. The pore‐water pressure (pwp) distributions obtained from the analytical solution can be incorporated into a limit equilibrium method to do infinite slope stability analysis for a rain‐induced shallow slip. The analysis method takes into account the influence of the water content change on unit weight and hence on factor of safety. A series of analytical parametric analyses have been performed using the developed model. The analyses indicate that when the residual soil slope, consisting of a completely decomposed granite layer underlain by a less permeable layer, is subjected to a continuous heavy rainfall, the loss of negative pwp and the reduction in factor of safety were found to be most significant for the shallow soil layer and during the first 12 h. The antecedent and subsequent rainfall intensity, depth of a less permeable layer and slope angle all have a significant influence on the pwp response and hence the slope stability. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Continuous determination of drying-path SWRC of fine-grained soils     

《Geomechanics and Geoengineering》2013,8(1):28-35

Establishing the soil water retention curve, SWRC or the soil water characteristic curve, SWCC, is very useful for determination of unsaturated properties of soils. However, it has been observed that SWRC of a soil is not unique and depends on various factors such as the initial moisture content, density of soil, method of compaction, soil fabric and the path (drying or wetting) adopted for establishing it. In this context, many techniques and instruments have been employed by earlier researchers for determination of the SWRC of soils. However, these techniques entail weighing of the samples during prolonged testing, manually, and hence yield discrete data points. In this situation, AquaSorp® Isotherm Generator (manufactured by Decagon Devices Inc., USA) has been found to be quite useful for continuous determination of the drying-path SWRC of fine-grained soils. This device has been primarily employed for food products, powders and amorphous materials. Hence, demonstration of the utility and limitations of this device for SWRC determination of fine-grained soils becomes essential. With this in mind, extensive studies were conducted on commercially available soils (Kaolinite and Bentonite) by employing this device. In order to understand the influence of specimen specific parameters on the obtained SWRCs, the molding water content and thickness of the specimens were varied and the results have been evaluated critically. Details of the methodology adopted for these investigations, and the findings of the study are presented in this technical note. Based on a critical comparison of the results obtained from this device with those obtained from the dewpoint potentiameter, WP4®, the utility of this device for continuous determination of drying-path SWRC of the soils has also been demonstrated.  相似文献   

Effect of shape on holding capacity of plate anchors buried in soft soil     

《Geomechanics and Geoengineering》2013,8(2):145-154

Plate anchor is one of the most common varieties of anchors used in the construction and maintenance work of various on-land and offshore structures. An accurate estimation of the uplift capacity of anchor foundations is necessary for an economical design as well as for the safety and stability of structures. This paper outlines the effect of shape of anchor plates on their breakout capacity, through a series of model tests. Both shallow and deep anchor behaviours were investigated under conditions developing suction force and without suction force. The results of these tests are presented in terms of load-displacement behaviour, variation of breakout factors (with and without suction force) with depth of embedment, the critical embedment depth of anchors and variation of suction force with embedment ratio. Further, the variations of breakout factor ratio with aspect ratio and embedment ratio are reported. Based on the experimental results and the model test results of other investigators an empirical relationship has been suggested to determine the shape factor and holding capacity of plate anchors buried in saturated cohesive soils.  相似文献   

基于CFD的大通孔开闭式钻头流场研究          下载免费PDF全文

陈鱼  王义红  乔慧丽  李彦明 《探矿工程》2013,40(9):52-54

采用计算流体力学方法对大通孔开闭式钻头\[1\]的流场进行数值模拟。对不同工况下的速度场进行分析,获得了最佳钻进风量,并发现流场中存在“阻塞漩涡”。对最佳流量工况下的压力场进行分析,发现流场中还存在“抽吸压差”。获得了“阻塞漩涡”和“抽吸压差”对排渣和散热的影响机理,为钻头的优化设计提供了一些参考依据,为松软突出煤层全孔筛管护孔瓦斯抽采技术在煤矿中推广应用奠定了基础。  相似文献