青海省扎日根结扎群火山岩形成时代及构造背景分析     

任二峰  才航加 《火山地质与矿产》2010,(4):245-256

青海扎日根结扎群火山岩中基性岩以贫硅、钾,高钛、钙,中性岩类以低硅、中钾、钛、钙,酸性岩类以高硅、钾,中钛,低钙为特征。根据Fe＊/MgO-TiO2图解上显示出本区火山岩绝大多数火山岩落在岛弧区。微量元素中Th/Nb=0.9〉0.11,Nb/Zr〉0.04显示出其构造背景为陆-陆碰撞形成的岛弧区。扎日根结扎群火山岩时代Rb-Sr同位素等时线给出的年龄为231±28Ma和225±8 Ma,属晚三叠世。另外Sr同位素的初始比值ISr=0.70522±0.00023,小于0.719,表明岩浆（原始）来源于上地幔,并且在上升的过程中受到地壳的混染。  相似文献   

大连开发区大小窑湾港址区域及场地稳定性研究     

范晓军  宋东升 《东北地震研究》2010,26(1):12-18

本文在分析区域地质新构造运动、地震及工程地质资料的基础上,对大连经济技术开发区大小窑湾港址的区域及场地稳定性作了研究,认为该区属次不稳定区,对场地而言,缓丘,红粘土砾石段和粘性土等地段为稳定性较好的地段。  相似文献   

Origin of CO_2 in natural gas from the Triassic Feixianguan Formation of Northeast Sichuan Basin     

HUANG SiJing  HUANG KeKe  TONG HongPeng  LIU LiHong  SUN Wei & ZHONG QianQian State Key Lab of Oil  Gas Reservoir Geology  Exploitation 《中国科学:地球科学(英文版)》2010,(5)

The natural gas from the Triassic Feixianguan Formation of Northeast Sichuan Basin contains high H2S whereas relatively low CO2 concentrations and the CO2 display high δ13C values (ranging from -5.81‰ to 3.3‰ (PDB)). This seems to contradict the conventional wisdom that TSR should be a primary source of CO2 in natural gas from the Feixianguan Formation. In contrast, many authigenic calcite samples from these sites display very low δ13C values (ranging from -18.4‰ to -10.3‰ (PDB)). This suggests that the carbon from TSR source dominated the formation of calcite whereas the carbon from inorganic source came into CO2 in natural gas. In order to assess the origin of CO2 from these H2S-rich sites, we have calculated the relative contributions of organic and inorganic carbon sources to the CO2 and authigenic calcite. The organic carbon source possibly originated from TSR, whereas the inorganic one might be generated from marine carbonates dissolution. This calculation is based on the carbon isotopic compositions of CO2 and authigenic calcite as well as an isotopic mass balance. The results show that the contribution of organic carbon source to the CO2 is only 2%, whereas that to authigenic calcite is as high as 43% on average. Such results combined with thermodynamic evidence indicate that the isotopically light CO2 produced by TSR process may contribute to authigenic calcite precipitation during burial diagenesis. Distinguishable from Ordovician reservoir of Tarim Basin, Feixianguan reservoir of Northeast Sichuan Basin experienced rapid tectonic uplift due to Yanshanian movement after TSR occurred. Such tectonic event could induce temperature decrease and further promote carbonates dissolution. During these processes, secondary porosity has developed in Feixianguan carbonate reservoirs. Therefore, much attention should be paid to the structural highs in search of high quality carbonate reservoirs.  相似文献   

东海盆地西湖凹陷构造样式及其演化     

宋小勇  储呈林  芮志峰 《高校地质学报》2010,16(1):86-93

西湖凹陷是经历多期构造作用的白垩—第三纪盆地。多期裂陷和反转构造作用的叠加导致了相对复杂的构造格架样式和盆地地质结构。凹陷总体上具有东西分带,南北分块的构造格局。裂陷期的同沉积断裂组成了多种复合的构造样式：西部斜坡带主要发育断阶、地堑和地垒构造;中央洼陷带则以复合“Y”字型、羽状和似花状断裂组合为主;东缘断阶带主要发育“Y”字型、梳状和羽状组合。坳陷反转期,早期的同沉积断裂发生了不同程度的逆冲反转,形成了多种复合的构造样式,例如反冲叠瓦扇构造、后断叠瓦式逆冲构造等叠合构造样式。从盆地的构造样式出发,探讨了盆地的形成演化和构造- 沉积充填过程对有利圈闭带发育分布的控制作用,对富生烃凹陷油气预测具有重要指导意义。  相似文献   

Influence of shear angle on hangingwall deformation during tectonic inversion     

Yasuhiro Yamada  Ken McClay 《Island Arc》2010,19(3):546-559

Tectonic inversion is a common phenomenon in island arc settings, especially in back‐arc basins. The reactivation of normal faults as thrusts, triggered by tectonic inversion, produces typical inversion fault‐related folds and thrusts in the hangingwall. These hangingwall inversion geometries are affected by two factors: the geometry of the underlying master fault and the angle of inclined simple shear relative to the regional dip of strata, in the case that the deformation is approximated by simple shear. This study employed numerical simulations to analyse the influence of the antithetic shear angle on the geometry of the hangingwall and displacement along the master fault. The simulation results reveal that a steeply inclined shear vector during extension produces a narrow, steep‐sided half‐graben, whereas a gently inclined shear produces a wide, open basin. After tectonic inversion, a tight anticline is formed under steeply inclined shear, whereas an open anticline is formed under gently inclined shear. Antithetic shear results in reduced total displacement along the master fault, and the greater the angle between the shear direction and the regional dip, the greater the displacement along the master fault. Because the deformation geometry of syn‐extension layers is affected by extension followed by contraction, a change in the shear angle during tectonic inversion produces a wide variety of deformation geometries. Comparison of the simulation results with the results of analogue modelling suggests that the shear angle decreases by 5° during the transition from extension to tectonic inversion and that such a change may be commonly observed in natural geological structures. These results highlight the benefits of numerical simulations, which can be used to readily examine a variety of constraining parameters and thereby lead to a better understanding of the mechanism of hangingwall deformation, avoiding erroneous estimates of the amount of fault displacement.  相似文献   

Soft‐sediment deformation structures in Cretaceous non‐marine deposits of southeastern Gyeongsang Basin,Korea: Occurrences and origin     

Hee‐Cheol Kang  In Sung Paik  Ho Il Lee  Jeong Eun Lee  Jong‐Hwa Chun 《Island Arc》2010,19(4):628-646

A variety of soft‐sediment deformation structures formed during or shortly after deposition occurs in the Cretaceous Seongpori and Dadaepo Formations of the southeastern Gyeongsang Basin exposed along coastal areas of southeastern Korean Peninsula for 0.5–2 km. These are mostly present in a fluvial plain facies, with interbedded lacustrine deposits. In this study, the features of different kinds of soft‐sediment deformation structures have been interpreted on the basis of sedimentology of structure‐bearing deposits, comparison with normal sedimentary structures, timing and mechanism of deformation, and triggering mechanisms. The soft‐sediment deformation structures can be classified into four morphological groups: (i) load structures (load casts, ball‐and‐pillow structures); (ii) soft‐sediment intrusive structures (dish‐and‐pillars, clastic dykes, sills); (iii) ductile disturbed structures (convolute folds, slump structures); and (iv) brittle deformation structures (syndepositional faulting, dislocated breccia). The most probable triggering mechanisms resulting in these structures were seismic shocks. These interpretations are based on the following field observations: (i) location of the study area within tectonically active fault zone reactivated several times during the Cretaceous; (ii) deformation structures confined to single stratigraphic levels; (iii) lateral continuity and occurrences of various soft‐sediment deformation structures in the deformed level over large areas; (iv) absence of depositional slope to indicate gravity sliding or slumping; and (v) similarity to the structures produced experimentally. The soft‐sediment deformation structures in the study areas are thus interpreted to have been generated by seismic shocks with an estimated magnitude of M > 5, representing an intermittent record of the active tectonic and sedimentary processes during the development and evolution of two formations from the late Early Cretaceous to the Late Cretaceous.  相似文献   

新疆西克尔地区下奥陶统鹰山组岩溶分带性研究   总被引：1，自引：0，他引：1  

冯海霞  李树新  陈冬梅  和虎  周彩虹 《现代地质》2010,24(6):1065-1071

塔里木盆地岩溶缝洞型储层作为重要的油气储层备受关注,而目前预测此类型储层的方法较有限。在新疆伽什县西克尔野外露头区地表岩溶现象丰富,志留系地层以填平补齐的方式充填在一系列的溶沟和溶槽中,部分洼地中还有志留系地层残留,表明该区发育加里东中期岩溶。在本区岩溶古地貌的基础上,基于排泄基准面的分析,划分出3级岩溶台面并对应发育3期岩溶。据现代地貌学和岩溶学理论,按照水动力条件的不同并结合本区岩溶发育特征,运用岩溶旋回的观点将第二期岩溶剖面分为表层岩溶带、垂直渗滤带和水平潜流带,认识到西克尔地区古岩溶地下水发育规律及洞穴发育程度。构造运动是垂向岩溶分带性的主控因素;因此,在大的构造背景的前提下,可以有效地预测巴楚地区的缝洞型储层。  相似文献   

东非裂谷东支South Lokichar盆地石油地质特征及成藏规律     

贾屾  何登发  韩文明  胡滨 《地质学报》2022,96(2):630-643

东非裂谷东支由多个盆地组成,South Lokichar是唯一有油气发现的盆地,目前对于该盆地的石油地质特征及成藏规律仍认识不清,严重制约着东非裂谷东支下一步勘探.本文综合利用钻井、地震、岩芯、薄片以及分析化验等资料,对South Lokichar盆地的构造和地层发育特征、关键成藏条件和影响因素以及成藏规律进行详细分析...  相似文献   

Genetic algorithm for fitting a mixed Bingham distribution to 3D orientations: a tool for the statistical and paleostress analyses of fracture orientations          下载免费PDF全文

Atsushi Yamaji 《Island Arc》2016,25(1):72-83

The clustering of fracture orientations is important for tectonic studies and for geotechnical engineering. In this study, a real‐coded genetic algorithm was adopted to fitting a mixed Bingham distribution to orientation data by maximizing the log‐likelihood function of the distribution. The maximization is a difficult problem, because the function has multimodality and singularity. It was found that the algorithm was effective for this problem. Given the orientations of dilational fractures, the present method determines not only the stress axes and stress ratio of each of the fracture groups but also the maximum non‐dimensionalized fluid pressure at the time of their formation. In addition, the software calculates the 95 % error ellipses of the concentration axes. The present method found that the orientations of ore veins of the Akenobe Mine, SW Japan, should be partitioned into three clusters. It is shown that two of the groups had distinctive Zn and Sn contents, and that the ore fluids had overpressures only slightly greater than the minimum principal stress at the time of the deposition of Zn‐ and Sn‐rich veins.  相似文献   

RELOCATION OF MAIN SHOCK AND AFTERSHOCKS OF THE 2014 YINGJIANG M_S5.6 AND M_S6.1 EARTHQUAKES IN YUNNAN          下载免费PDF全文

YANG Ting  WU Jian-ping  FANG Li-hua  WANG Wei-lai 《地震地质》2016,38(4):1047-1057

Yingjiang area is located in the China-Burma border,the Sudian-Xima arc tectonic belt,which lies in the collision zone between the Indian and Eurasian plates.The Yingjiang earthquake occurring on May 30th,2014 is the only event above M_S6.0 in this region since seismicity can be recorded.In this study,we relocated the Yingjiang M_S5.6 and M_S6.1 earthquake sequences by using the double-difference method.The results show that two main shocks are located in the east of the Kachang-Dazhuzhai Fault,the northern segment of the Sudian-Xima Fault.Compared with the Yingjiang M_S5.6 earthquake,the Yingjiang M_S6.1 earthquake is nearer to the Kachang-Dazhuzhai Fault.The aftershocks of the two earthquakes are distributed along the strike direction of the Kachang-Dazhuzhai Fault (NNE).The rupture zone of the main shock of Yingjiang M_S6.1 earthquake extends northward approximately 5km.The aftershocks of two earthquakes are mainly located in the eastern side of the Kachang-Dazhuzhai Fault with a significant asymmetry along the fault,which differ from the characteristics of the aftershock distribution of the strike-slip earthquake.It may indicate that the Yingjiang earthquakes are conjugate rupture earthquakes.The non-double-couple components are relatively high in the moment tensor.We speculate that the Yingjiang earthquakes are related to the fractured zone caused by the long-term seismic activity and heat effect in the deep between Kachang-Dazhuzhai Fault and its neighboring secondary faults.Aftershock distribution of the Yingjiang M_S6.1 earthquake on the southern area crosses a secondary fault on the right of the Kachang-Dazhuzhai Fault,suggesting that the coseismic rupture of the secondary fault may be triggered by the dynamic stress of the main shock.  相似文献