燕山中部大地热流及岩石圈热结构特征——以承德市七家- 茅荆坝地热田为例     

刘峰  王贵玲  张薇  岳晨  陆川  黄起伟  欧小科 《地质学报》2020,94(7):1950-1959

燕山中部地区地热资源丰富,地热地质条件较好,但该地区大地热流测量工作较少,岩石圈热结构研究尚未开展,制约了该地区的地热地质研究与资源勘探开发。本文以该地区的七家-茅荆坝地热田为典型区,结合地温测井、取样测试、数据收集与分析,初步查明燕山中部大地热流特征及浅部-深部岩层热物性特征,填补了大地热流值测量空白区,在此基础上建立了研究区热结构概念模型,估算其深部地温分布。研究得出燕山中部大地热流值变化较大,平均约57 mW/m~2,与周边温泉水温存在较好的相关关系。其中七家-茅荆坝地热田大地热流值较高,为74.9 mW/m~2。通过深部地温分布计算得出七家—茅荆坝地区居里面埋深为21.5～22.8 km,莫霍面温度约815℃,分析结果与前人研究成果较为一致,验证了本文所建立岩石圈热结构模型的准确性。  相似文献   

An improved segmentation approach for planar surfaces from unstructured 3D point clouds     

Tarek M.  Awwad  Qing  Zhu  Zhiqiang  Du  Yeting  Zhang 《The Photogrammetric Record》2010,25(129):5-23

The extraction of object features from massive unstructured point clouds with different local densities, especially in the presence of random noisy points, is not a trivial task even if that feature is a planar surface. Segmentation is the most important step in the feature extraction process. In practice, most segmentation approaches use geometrical information to segment the 3D point cloud. The features generally include the position of each point (X, Y and Z), locally estimated surface normals and residuals of best fitting surfaces; however, these features could be affected by noisy points and in consequence directly affect the segmentation results. Therefore, massive unstructured and noisy point clouds also lead to bad segmentation (over-segmentation, under-segmentation or no segmentation). While the RANSAC (random sample consensus) algorithm is effective in the presence of noise and outliers, it has two significant disadvantages, namely, its efficiency and the fact that the plane detected by RANSAC may not necessarily belong to the same object surface; that is, spurious surfaces may appear, especially in the case of parallel-gradual planar surfaces such as stairs. The innovative idea proposed in this paper is a modification for the RANSAC algorithm called Seq-NV-RANSAC. This algorithm checks the normal vector (NV) between the existing point clouds and the hypothesised RANSAC plane, which is created by three random points, under an intuitive threshold value. After extracting the first plane, this process is repeated sequentially (Seq) and automatically, until no planar surfaces can be extracted from the remaining points under the existing threshold value. This prevents the extraction of spurious surfaces, brings an improvement in quality to the computed attributes and increases the degree of automation of surface extraction. Thus the best fit is achieved for the real existing surfaces.  相似文献   

Use of terrestrial photogrammetry for monitoring and measuring bank erosion     

Rachel Barker  Lawrence Dixon  Janet Hooke 《地球表面变化过程与地形》1997,22(13):1217-1227

This paper examines the use of terrestrial photogrammetry as a technique for measuring bank erosion in a rapidly changing fluvial environment. It has been recognized that there are a number of advantages when applying photogrammetric techniques to geomorphological situations. In this study the enhancement of spatial sampling combined with the ability to capture additional information, such as soil moisture, on film, is of particular importance in enabling the identification of specific processes involved in bank erosion as well as detailed volumetric analysis of losses. Metric terrestrial photography was taken of the river bank on several dates, and data were abstracted by the use of analytical photogrammetry. This enabled the generation of digital terrain models from which morphological and volumetric changes could be assessed. © 1997 John Wiley & Sons, Ltd.  相似文献   

Stable carbon isotope variations in northwest Europe during the last glacial–interglacial transition     

Chris S. M. Turney  David J. Beerling  Douglas D. Harkness  J. John Lowe  E. Marian Scott 《第四纪科学杂志》1997,12(4):339-344

Stable carbon isotope data that span part of the last glacial–interglacial transition (ca. 14-9 ka ¹⁴C BP; ca. 15–11 ka cal. BP), and which derive from organ-specific plant macrofossils recovered from two lake sediment profiles in the UK and one in Norway, are compared. The recorded temporal variations show similar trends, which, over a millennial time-scale appear to parallel the main drift in δ¹⁸O as determined for the GRIP ice-core. It is postulated that some smaller scale variations in the δ¹³C profiles may reflect the shorter term oscillations in δ¹⁸O values evident in the GRIP record, although this is less certain. Overall, however, the results suggest that stable carbon isotope measurements based on organ-specific terrestrial plant macrofossils may provide (i) a means for establishing correlations between terrestrial successions and (ii) additional paleoenvironmental information, as the apparent ‘shadowing’ of the GRIP record indicates a common forcing mechanism for both Greenland δ¹⁸O and northwest European δ¹³C variations. From the evidence available we suggest that the recorded δ¹³C variations reflect fluctuations in air temperature and/or changes in water vapour pressure in the atmosphere. © 1997 John Wiley & Sons, Ltd.  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

利用地面激光与地质雷达综合探测活断层浅层三维结构——以川西理塘毛垭坝盆地北缘正断层为例     

张迪  吴中海  李家存  刘绍堂  马丹  卢燕 《地震地质》2019,41(2):377-399

快速获取活断层的高精度微地貌形态和对应的浅层三维结构是揭示活断层浅地表形迹与活动特征的关键。文中综合利用地面三维激光扫描仪和地质雷达技术,以川西理塘地区毛垭坝盆地北缘主边界断裂禾尼段的正断层崖为研究对象,获取了该处正断层错动2期最新地貌面的精确地表垂直位移量和浅层二维地质雷达图像,并初步建立了基于地面三维激光与地质雷达的活断层微地貌精细化三维测量方法,构建了断层崖微地貌的精细三维模型和浅表三维图像,揭示了正断层崖处发育的伸展地堑结构,同时初步实现了断层微地貌地表地下三维数据的一体化融合显示及相互解译。应用结果表明,该方法可以同时快速、高效、无损地获取大范围内的活断层微地貌及浅层结构的多层次、多视觉的空间数据,极大地提高了对活动断层微地貌形态与浅层结构进行快速调查与研究的精度和认识水平,也为更全面地认识和理解活断层的空间分布与变形特征、活动习性和多期古地震遗迹等提供重要的数据和方法支持。因此,对该方法的继续探索和完善,将显著提升和扩展其在活断层定量化和精细化研究中的实用性及应用前景。  相似文献   

白令海北部陆坡全新世以来长链正构烷烃的古环境意义     

张海峰  王汝建  肖文申 《海洋学报(英文版)》2017,36(8):137-145

本文对白令海北部陆坡B2-9站位沉积物岩芯开展了高分辨率的生物标志物分析,获得了研究区近一万年来陆源长链正构烷烃（简写为烷烃）的输入及其源区植被结构的变化等相关记录。结果表明,nC₂₇是烷烃中最高的主碳峰,对烷烃总量的贡献也最大,这可能与源区木本植物的丰度及其分布有关;nC₂₃的含量也较高,可能主要是来源于北半球沿海地区广泛分布的一类沉水植物。全新世期间,烷烃总量分别在7.8 ka B.P.,6.7 ka B.P.和5.4 ka B.P.经历了三次阶梯状的下降过程,呈现出四个相对稳定的阶段,可能主要受控于早全新世海平面上升以及源区气候环境和植被分布的变化。烷烃的分子组合特征各参数（如CPI、ACL以及nC₃₁/nC₂₇等）的变化则表明,烷烃主要来自陆生高等植物,且全新世期间植被结构较为稳定,木本植物占据优势。此外,在几个较短的时期内,烷烃总量及其分子组合特征等参数的变化具有同步性,表明在这些时期特殊的气候条件下,源区木本植物烷烃对烷烃总量的贡献率的增加可能低于草本植物烷烃和化石烷烃。  相似文献   

中国北方中新生代盆地深部砂岩铀矿成矿条件与找矿方向   总被引：1，自引：0，他引：1  

苗培森  李建国  汤超  金若时  程银行  赵龙  肖鹏  魏佳林 《地质通报》2017,36(10):1830-1840

受开采技术、成本和成矿理论制约,现有的砂岩型铀矿勘查主要选择在盆地边缘700m以浅的地区,对盆地深部的铀矿找矿潜力研究较少。总结中国北方重要中新生代盆地的含铀岩系、构造特征,结合近年开展的北方砂岩型铀矿深部找矿,分析了盆地深部成矿有利的沉积建造、构造与流体改造、还原条件等,指明了盆地的深部找矿潜力。同时指出,作为战略储备,当前盆地深部寻找砂岩型铀矿要优先重视2个方向:(1)在盆地边缘斜坡区,重点以发育红-黑岩系结构的含铀地层为目标,寻找与浅部成矿条件相似的深部矿床;(2)在盆地中心区,以含铀的红色岩系为重点,优先寻找延伸至盆地深部的正向构造区和砂体发育区。这些认识在松辽盆地的铀矿调查中得到验证。  相似文献   

Terrestrial laser scanning of rock slope instabilities          下载免费PDF全文

Antonio Abellán  Thierry Oppikofer  Michel Jaboyedoff  Nicholas J. Rosser  Michael Lim  Matthew J. Lato 《地球表面变化过程与地形》2014,39(1):80-97

  相似文献   

内核地球的自转运动和地球固定参考系的研究   总被引：4，自引：4，他引：0       下载免费PDF全文

张捍卫  许厚泽  王爱生 《地球物理学进展》2005,20(3):712-717

本文研究了内核地球模型下的地球表面的旋转运动和地球形变场的复数矢量球函数表示,以及外壳固定参考架、地球参考系的理论定义和它们之间等价性的理论证明.同时给出了液体外核（FOC）、固体内核（SIC）和整体地球的转动惯量张量和角动量的具体表达式.在考虑到引潮力位对地球形变场的影响下,研究了地幔相对角动量的具体表述.本文的工作是对前人有关理论的扩展和改进,对进一步研究内核地球自转的动力学理论是非常重要的.  相似文献