Extensional tectonic origin of gneissosity and related structures of the Feiran–Solaf metamorphic belt, Sinai, Egypt     

A. Fowler  I. Hassan 《Precambrian Research》2008,164(3-4):119-136

The Feiran–Solaf metamorphic belt consists of low-P high-T amphibolite facies, partly migmatized gneisses, schists, amphibolites and minor calc-silicate rocks of metasedimentary origin. There are also thick concordant synkinematic sheets of diorite, tonalite and granodiorite orthogneiss and foliated granite and pegmatite dykelets. The gneissosity (or schistosity) is referred to as S₁, and is almost everywhere parallel to lithological layering, S₀. This parallelism is not due to transposition. The gneissosity formed during an extensional tectonic event (termed D1), before folding of S₀. S₁ formed by coaxial pure shear flattening strain (Z normal to S₀, i.e. vertical; with X and Y both extensional and lying in S₁). This strain also produced chocolate tablet boudinage of some layers and S₁-concordant sills and veins. S₁ has a strong stretching lineation L₁ with rodding characteristics. Within-plane plastic anisotropy (lower ductility along Y compared to along X) resulted in L₁-parallel extensional ductile shears and melt filled cracks. Continued shortening of these veins, and back-rotation of foliations on the shears produced intrafolial F₁ folds with hinges parallel to the stretching lineation. F₁ fold asymmetry variations do not support previous models involving macroscopic F₁ folds or syn-gneissosity compressional tectonics. The sedimentary protoliths of the Feiran–Solaf gneisses were probably deposited in a pre-800 Ma actively extending intracratonic rift characterizing an early stage of the break-up of Rodinia.  相似文献   

贵州青岩剖面青岩阶上部牙形石的发现及其意义     

武桂春  姚建新  纪占胜  王立亭 《地质学报》2008,82(2):145-154

在贵州青岩剖面的青岩组之上,原被认为是拉丁期的垄头组下部的层段中发现了牙形石动物群,除少量的分枝分子外,都归属于Neogondolella属,可鉴定为4个种,即Neogondolella bifurcata,N.constricta,N.mombergensis和N.navicula.建立了2个牙形石带,自下而上是Neogondolella bifurcata带和N.cinstricta带.牙形石面貌证明这段地层在时代上非常接近但尚未进入拉丁阶,属于安尼期中晚期,进一步的牙形石工作将很有可能在目前发现的牙形石层段的上部寻找到安尼阶和拉丁阶之间的界限,从而为青岩阶顶界的限定提供可靠的牙形石证据.此外,牙形石的发现还初步实现了青岩阶2大主导门类化石--牙形石和菊石在同一剖面的直接对比关系.  相似文献   

辽河断陷大民屯凹陷静北潜山孢粉化石新发现     

吴炳伟张巨星  江建虹陈家敏黄淑芳  薛尚义 《地质学报》2008,82(2):165-168

静北潜山的油气勘探始于上世纪70年代初,并将钻井揭示的未见化石的碳酸盐岩和石英砂岩沉积划归中元古界长城系,沿用至今.2002年在对该区的地层研究中,首次发现了晚古生代孢粉化石,从而证实静北潜山存在晚古生代地层.本文以孢粉化石为主要依据,对潜山地层进行了重新划分,并与邻区进行对比.在此基础上对本区的构造和沉积作一讨论.  相似文献   

扬子及周缘地区上奥陶统-下志留统烃源岩发育环境及其控制因素   总被引：6，自引：0，他引：6  

严德天  王清晨  陈代钊  汪建国  王卓卓 《地质学报》2008,82(3):321-327

扬子地区下古生界发育了上奥陶统五峰组和下志留统龙马溪组两套有效烃源岩,查清其发育环境及其控制因素具有重要的科学理论和油气勘探意义.晚奥陶世开始,扬子地区进入碎屑岩陆棚演化阶段;五峰期-龙马溪期,扬子地区主体为局限的深水陆棚环境,总体呈现出浅水陆棚、深水陆棚、次深海共存的古地理格局.沉积体系展布和沉积演化主要受扬子陆块与华夏陆块的汇聚作用控制.扬子地区上奥陶统-下志留统烃源岩的形成与生烃母质生物的高生产力和高埋藏率、冰期-冰后期之交的气温快速转暖、海平面快速上升以及粘土矿物在有机质富集保存过程中的赋存驻留作用等密切相关.  相似文献   

鄂尔多斯盆地东缘煤储层微孔隙结构特征及其影响因素   总被引：2，自引：0，他引：2  

张松航  汤达祯  唐书恒  许浩  林文姬  张彪 《地质学报》2008,82(10):1341-1349

在对鄂尔多斯盆地东缘58套采自不同层位不同地域煤样显微组分测试和低温液氮比表面测试的基础上,从比表面积、吸附曲线形态、阶段孔径结构分布、阶段孔径比表面积贡献、FHH分形特征几个方面刻画了煤储层微孔隙特征。同时,就“孔比表面积—孔隙结构—煤物质组成与化学结构”这一因果链,分析了鄂尔多斯盆地东缘煤微孔隙特征与煤变质程度、煤岩显微组分以及矿物组分与类型的关系。研究发现,Ro在0.60%~1.91%范围内,比表面积及FHH分形分维数先明显降低,Ro至1.3%后又略有回升,同时吸附回线“滞后环”及分形尺度对应的压力范围明显减小,孔径3~4 nm“墨水瓶”型孔明显减少乃至消失,并成为比表面积减少的主要贡献者。在相似煤级条件下,惰质组分较镜质组分有更多的比表面积贡献。粘土矿物组分含量>10%时,孔径3~4 nm“墨水瓶”型孔对比表面贡献明显,且随煤级增高影响作用相对加大。  相似文献   

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化   总被引：7，自引：0，他引：7  

章伟 《地质学报》2008,82(11):1531-1539

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。  相似文献   

Planktonic foraminifers in the southern Bering Sea: Changes in composition and productivity during the Late Pleistocene-Holocene     

M. P. Chekhovskaya  I. A. Basov  A. G. Matul  T. A. Khusid  S. A. Gorbarenko 《Stratigraphy and Geological Correlation》2008,16(3):328-342

Taxonomic composition and distribution of planktonic foraminifers are studied in section of Core GC-11 that penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, the southern Bering Sea. As is shown, structure of foraminiferal assemblage and productivity have varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the northern part of the Pacific, the Bering Sea included. The productivity was maximal during deglaciation epoch, being notably lower in the Holocene and minimal at the glaciation time.  相似文献   

湖南石门杨家坪下寒武统杷榔组三段混合沉积研究   总被引：5，自引：1，他引：4  

董桂玉  何幼斌  陈洪德  罗进雄  秦志勇 《地质论评》2008,54(5):593-601

湖南石门杨家坪下寒武统杷榔组三段发育陆源碎屑与海相碳酸盐的混合沉积。综合前人研究成果,通过对研究区野外露头资料的详细观测和室内样品分析及数据统计等工作,对研究区杷榔组三段混合沉积进行了详细的研究。研究区混合沉积特征宏观上表现为由陆源碎屑与混积物交互沉积、碳酸盐与混积物交互沉积和不同类型混积物本身的交互沉积构成的混积层系,微观上表现为陆源碎屑组分与碳酸盐组分混合沉积所形成混积岩;混合沉积类型主要为内潮汐沉积作用和浊流沉积作用形成的复合式混合沉积Ⅱ,次为深水原地沉积作用形成的渐变式混合沉积,但是不同成因的沉积作用形成的混合沉积类型往往叠加在一起,形成复合式混合沉积Ⅱ+渐变式混合沉积的混合沉积复合体;混合沉积环境为深水斜坡,发育内波、内潮汐混合沉积微相、深水原地混合沉积微相和远源浊流混合沉积微相等类型;在沉积环境分析的基础上,根据内波、内潮汐沉积特征,剖析了混合沉积的沉积机理;结合混合沉积的成因、沉积机理、产出部位及沉积环境等因素,以沉积学原理为指导,建立了研究区杷榔组三段的混合沉积模式。  相似文献   

塔里木西部地区古生代断裂活动的方式和机制   总被引：15，自引：2，他引：13       下载免费PDF全文

李曰俊  吴根耀  孟庆龙  师骏  冯晓军  郑民 《地质科学》2008,43(4):727-745

基于系统的地震剖面解释及其与塔中地区的对比,本文探讨了塔里木西部地区古生代断裂活动的方式和机制。玛东断裂带是一条宽阔的北东向盖层滑脱型褶皱冲断带,前展式向东南扩展,冲断作用发生在奥陶纪末。巴东断裂(吐土休克Ⅱ号断裂)为北西向基底卷入型冲断带,奥陶纪末和中二叠世末发生冲断。巴西断裂和塔参2井南断裂是海西期的正断层。塔里木古板块古生代的发育受邻侧的造山带演化制约,近东西向和北东向断裂奥陶纪末的冲断是继承基底构造发育的。塔中地区的近北西向断裂是晚寒武世的新生断裂,加里东运动可分为两幕:奥陶纪末的冲断(艾比湖运动)和晚志留-中泥盆世的冲断-走滑,后者向西明显减弱。塔里木西部的部分北西向断裂(如康西断裂)可归入塔中北西向断裂系。北东向的玛东断裂带是其西的向北(东)冲断的吐木休克断裂带与其东的向南偏东冲断的塔中8-1井——塔中5井断裂带之间的调节断层。  相似文献   

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints   总被引：2，自引：2，他引：0  

N. Fardin 《Rock Mechanics and Rock Engineering》2008,41(2):267-297

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran  相似文献