Large-eddy simulation of the turbulent near wake behind a circular cylinder: Reynolds number effect     

《Applied Ocean Research》2015

The purpose of the present work is <!–<query>The highlights are in an incorrect format. Hence they have been deleted. Please refer the online instructions: http://www.elsevier.com/highlights and provide 3-5 bullet points.</query>–>to study the effect of the Reynolds number on the near-wake structure and separating shear layers behind a circular cylinder. Three-dimensional unsteady large-eddy simulation is carried out and two different subgrid scale models are applied in order to evaluate the turbulent wake reasonably. The Reynolds number based on the free-stream velocity and the cylinder diameter is ranging from Re = 5500–41,300, corresponding to the full development of the shear-layer instability in the intermediate subcritical flow regime. For a complete validation of this numerical study, hydrodynamic bulk coefficients are computed and compared to experimental measurements and numerical studies in the literature. Special focus is made on the variations of both the large-scale near-wake structure and the small-scale shear-layer instability with increasing Reynolds numbers. The present numerical study clearly shows the broadband nature of the shear-layer instability as well as the dependence of the shear-layer frequency especially on the high Reynolds numbers.  相似文献   

弧形防波堤波浪力试验研究     

赵利平  朱亚州  谢奥运  邹俊飞 《海洋工程》2015,33(5):35-42

在圆筒形防波堤和V形防波堤的基础上,结合离岸堤后形成V形和半圆形连续出现的韵律海岸的地貌平面形态特点,提出一种前墙为连续的半圆筒形防波堤形式。通过在波浪水槽内进行规则波物理模型试验,探究这一新型防波堤的波压力分布规律及波高、周期、水深等因素对波压力的影响。将试验结果与海港水文公式和合田良实公式计算的理论值对比分析,给出了以合田良实公式的折减系数来拟合新型弧形防波堤波浪总水平力的计算公式。结果表明:新型弧形防波堤上的波压力随波高、周期的增大而增大,其水平波浪总力比同等尺度直墙少10%左右。  相似文献   

CFD-based numerical analysis of a variable cross-section cylinder     

Jinlong Duan  Weiping Huang 《中国海洋大学学报(英文版)》2014,13(4):584-588

Using ANSYS-CFX, a general purpose fluid dynamics program, the vortex-induced vibration (VIV) of a variable cross-section cylinder is simulated under uniform current with high Reynolds numbers. Large eddy simulation (LES) is conducted for studying the fluid-structure interaction. The vortex shedding in the wake, the motion trajectories of a cylinder, the variation of drag and lift forces on the cylinder are analyzed. The results show that the vortices of variable cross-section cylinder are chaotic and are varying along the cylinder. In places where cross-sections are changing significantly, the vortices are more irregular. The motion trail of the cylinder is almost the same but irregular. The drag and lift coefficients of the cylinder are varying with the changes of diameters.  相似文献   

一种深度图像拟合圆柱的优化方法   总被引：1，自引：0，他引：1  

危双丰  王晏民 《测绘科学技术学报》2007,24(5):368-370

圆柱状构件广泛存在于古建筑仿真中,为了提高古建筑深度图像圆柱拟合的精度,针对古建筑仿真3维建模的特点,提出基于高斯图获取圆柱拟合参数初始值,然后利用圆柱距离函数参数化法进行非线性最小二乘拟合的圆柱拟合方法.实验证明,该方法不仅具有较高的精度,而且拟合结果稳定可靠.  相似文献   

大型智能控制压扭多轴加载试验机的研制          下载免费PDF全文

刘超  曹威  张建民 《地震工程学报》2017,39(2):369-375

设计和研制一台大型智能控制压扭多轴加载试验机,形成一个集动静加载、扭剪、常规三轴等功能为一体的多功能土动力试验平台。该试验机具有如下特点:(1)试样尺寸大,高度可达600mm,且可根据试验需求更换大小不同的试样及相应传感器;(2)加载自由度多,可独立施加轴力、扭矩、内压、外压、孔压及相应的位移,实现5个不同物理量的独立控制,从而大大拓宽可施加的应力路径范围;(3)控制智能化,可先将拟进行的应力路径或应变路径写入程序中,试验过程中即可由计算机自动控制。测试结果表明,该试验机的控制精度能够满足土工材料试验的要求。  相似文献   

Solutions for the deformations and stability of elastoplastic hollow cylinders subjected to boundary pressures     

X. Chen  C. P. Tan  C. M. Haberfield 《国际地质力学数值与分析法杂志》1999,23(8):779-800

In this paper, a closed-form solution is presented for the stress and displacement distributions throughout a hollow cylinder subjected to uniform pressures acting on its internal and external boundary surfaces under plane strain conditions. The material is assumed to be elastoplastic, obeying a Mohr–Coulomb failure criterion, and exhibiting dilatant plastic deformation according to a non-associated flow rule. The newly developed analytical solution is verified through comparison with the solutions obtained from an infinite boundary problem (for which a closed-form solution exists), and numerical analyses using the program FLAC. The solution is also compared with the results of a borehole collapse test on a thick-walled hollow cylinder of synthetic shale. The analytical solution can be used to calculate the stress and displacement distributions around boreholes and other cylindrical cavities under both infinite and finite boundary conditions under both drained and undrained conditions. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

定向剪切应力路径下冻结黏土变形特性试验     

陈敦  马巍  王大雁  穆彦虎  雷乐乐  王永涛  周志伟  蔡聪 《岩土力学》2018,39(7):2483-2490

为研究复杂应力路径下冻土的强度与变形特征,采用冻土空心圆柱仪（FHCA-300）对不同负温状态下的饱和冻结黏土开展定向剪切试验,基于不同剪切方向下冻结黏土的轴向和扭剪分量的应力-应变关系,探讨土样的剪切变形特征、各向异性属性以及剪切带的演变规律,并考察温度、大主应力方向角、平均主应力以及中主应力系数等因素对冻结黏土强度的影响。结果表明：平均主应力p值对冻结黏土的应力-应变关系影响显著,尤其是p=4.5 MPa时具有较高的剪切强度,且该值可能为压融临界p值;大主应力方向变化会诱发冻结黏土的各向异性,随着大主应力方向角的增加,冻结黏土剪切强度逐渐降低,并有明显的剪切带产生;中主应力系数的增加使得轴向强度有逐渐降低的趋势,但对剪切强度影响不明显;随着温度的降低,冻结黏土强度逐渐增大,试样发生脆性破坏并出现剪切破裂面,其剪切强度主要取决于冰颗粒和土颗粒的胶结力。  相似文献   

岩石空心圆柱扭剪仪研制的重点问题及研究进展     

周辉  黄磊  姜玥  卢景景  张传庆  胡大伟  李震 《岩土力学》2018,39(12):4295-4304

随着深部岩体工程的发展,开挖卸荷导致的应力主轴旋转问题引起了广泛关注。首先,分析总结了岩体工程中存在的应力主轴旋转问题及其对岩体工程稳定性的影响;其次,介绍了土体空心圆柱扭剪仪的发展现状及其特点,从荷载的施加方式、试样尺寸两个方面指出了研制岩石空心圆柱扭剪仪的关键问题,并与土体空心圆柱扭剪仪进行了对比,提出了新的扭矩施加技术和合理的岩石空心圆柱试样尺寸;最后,总结概括了考虑应力主轴旋转的土体本构模型的研究成果,并对考虑应力主轴旋转的岩石本构关系的研究进行了展望。该工作将对岩石空心圆柱扭剪仪的研制和相关理论的研究提供一定的参考和指导。  相似文献   

岩石空心圆柱扭剪仪试验能力     

周辉  姜玥  卢景景  胡大伟  张传庆  陈珺  李震 《岩土力学》2018,39(5):1917-1922

针对自行研制的岩石空心圆柱扭剪仪可独立控制4个加载参数（轴力、扭力、内围压和外围压）的功能,通过数学和力学分析,系统地整理出几种易于实现且符合实际工程的应力路径及加载方式：在轴力与内围压满足一定关系的前提下,可以获取岩石的抗拉强度,提供一种新型测量岩石抗拉强度的方法;通过控制内外围压及轴力,可以进行常规三轴试验与真三轴试验,克服了现阶段岩石真三轴试验中试验装置复杂、试样加载面摩擦大的缺点;在轴力与内、外围压分别满足一定关系时,可以分别实现平均应力p不变与中主应力系数b不变的应力路径,用于研究应力主轴旋转对岩石力学性质的影响。上述应力路径的实现对岩石力学性质的研究以及现阶段岩石室内试验的发展具有重要意义。  相似文献   

Benchmark computations for flows around a stationary cylinder with high Reynolds numbers by RANS-overset grid approach     

《Applied Ocean Research》2017

The aim of this paper is to evaluate the accuracy, stability and efficiency of the overset grid approach coupled with the RANS (Reynolds Averaged Navier-Stokes) model via the benchmark computations of flows around a stationary smooth circular cylinder. Two dimensional numerical results are presented within a wide range of Reynolds numbers (6.31 × 10⁴ ∼ 7.57 × 10⁵) including the critical flow regime. All the simulations are carried out using the RANS solver pimpleFoam provided by OpenFOAM, an open source CFD (Computational Fluid Dynamics) toolkit. Firstly, a grid convergence study is performed. The results of the time-averaged drag and lift force coefficients, root-mean square value of lift force coefficient and Strouhal number (St number) are then compared with the experimental data. The velocity, vorticity fields and pressure distribution are also given. One main conclusion is that the numerical solutions in regard to a fixed cylinderare not deteriorated due to the implementation of the overset grid. Furthermore, it can be an appealing approach to facilitate simulations of Vortex Induced Vibrations (VIV), which involves grid deformation. The present study is a good start to implement the overset grid to solve VIV problems in the future.  相似文献