四元体系Na~ ∥Cl~-,CO_3~(2-),B_4O_7~(2-)-H_2O 273K介稳相平衡研究     

《矿物岩石》2008,(4)

采用等温蒸发法研究简单四元体系Na ∥Cl-,CO32-,B4O72--H2O273K时的介稳相平衡,并测定该体系273K平衡液相中各组分的溶解度及密度,该体系的介稳相图和密度组成图显示:该四元体系在273K时的相图由3条溶解度单变量线、3个结晶区及1个共饱和点组成。体系属简单共饱型,无复盐或固溶体形成,3个结晶区分别对应单盐Na2CO3·10H2O,NaCl和Na2B4O7·10H2O。共饱点E处于Na2CO3·10H2O,NaCl及Na2B4O7·10H2O3盐共饱和,所对应的平衡液相组成为w(Na2CO3)=6.81%,w(NaCl)=21.69%,w(Na2B4O7)=0.65%,w(H2O)=70.85%。研究体系在273K下,Na2CO3·10H2O是碳酸钠盐的唯一析出形式,且硼酸钠对碳酸钠有盐析作用。  相似文献   

高精度煤炭三维地震勘探技术   总被引：1，自引：0，他引：1  

武喜尊 《物探与化探》2008,32(1):23-27

介绍了中国煤炭地震勘探技术的现状及所面临的问题,分析了煤炭三维地震勘探技术今后应努力研究和须重点关注的几个问题,如频率的问题,小面元高密度采集问题,加强叠前研究工作问题,及单点地震技术应用问题,从而实现高精度勘探的目的,满足煤矿生产、建设、安全等日益增长的需要。  相似文献   

抗滑桩设计推力计算方法研究   总被引：2，自引：0，他引：2  

和海芳  祁生文  伍法权  贺可强 《工程地质学报》2008,16(5):694-698

滑坡推力是抗滑桩设计推力的重要依据,工程中通常使用剩余推力法来计算滑坡推力。为了比较准确合理地计算出抗滑桩的设计推力,提出了在剩余推力法基础上的一种新的抗滑桩设计推力取值方法。分析极限平衡状态下和工程安全要求下各条块的剩余下滑力,选择合理的桩位,使得抗滑桩位于滑坡体的抗滑段;然后调整桩后滑体的剩余下滑力,其调整量一方面保证桩前桩后滑体满足工程安全要求,另一方面则作为抗滑桩设计推力的修正依据,其过程由程序实现。通过实例证明了该方法的合理性。同时对今后抗滑桩设计推力的合理取值提供了参考作用。  相似文献   

Laser probe Ar/Ar dating: History and development from a technical perspective     

Hironobu Hyodo   《Gondwana Research》2008,14(4):609

The ⁴⁰Ar/³⁹Ar method using a laser probe opened the door to microscale measurements and diffusion profiles frozen in samples. In the first decade since the initial application of a laser for ⁴⁰Ar/³⁹Ar dating in 1973, practical applications have been few. This is due not only to the fact that the laser and vacuum technologies were immature but that mass spectrometry was also in its infancy. In those days, the sensitivity of a mass spectrometer was generally insufficient to measure the small amount of argon degassed from a geological sample by a laser. These problems have subsequently been solved by new technologies. To understand their current status, a brief history of their development is outlined. This outline focuses on the required detection limit in micro scale measurement, practical approaches for accurate measurement are explained through examples in our laboratory specifically relating to the technical aspects of ⁴⁰Ar/³⁹Ar dating.  相似文献   

河南黄淮平原土壤中Cu的生态安全评价     

王强恒  李瑞敏  王支农  曹峰  胡永华  付巧玲 《地质通报》2008,27(2):271-276

在分析河南黄淮平原土壤和小麦籽实中Cu含量分布特征的基础上,利用单项污染指数法对研究区小麦籽实中Cu的污染状况进行评价。其结果为：研究区小麦籽实中Cu的单项污染指数Pi的平均值为0．473,说明研究区小麦籽实未受Cu的污染。Cu的状况良好。进一步讨论了土壤中Cu的含量与小麦籽实中Cu含量间的关系。认为小麦籽实中Cu的积累与土壤中的总Cu无明显的相关关系,而与土壤中的有效态Cu含量具有明显的相关性。据此,将土壤有效态Cu作为土壤Cu生态安全评价的指标。并建立了小麦籽实Cu与土壤有效Cu的响应关系模型,确定了土壤中有效Cu的安全界限值。  相似文献   

人工边坡潜在滑动面研究——以广州科学城某人工高边坡为例   总被引：2，自引：2，他引：0  

徐佩华  陈剑平  石丙飞  仲志成 《吉林大学学报(地球科学版)》2008,38(5)

运用强度参数的改变对边坡破坏面形迹影响不明显这一特点,在数值模拟过程中通过改变岩体强度参数,有效地获取潜在滑动面的位置和形态,较好地解决了滑动面搜索的难题。将该法应用于广州科学城某人工高边坡稳定性的研究,在三维数值模拟过程中,将强度参数大幅度折减,计算后获得各剖面的剪应变增量图,从这些图中可获得潜在滑动面。这与人们通常将此类边坡的中风化面作为滑动面存在较大差别。将该滑动面运用极限平衡法进行计算,计算结果显示各剖面的安全系数基本都大于1.2,边坡稳定但仍需要加固处理,与三维数值模拟结果相一致。由此认为用这种分析法确定出的潜在滑动面合理、计算结果可靠,可作为搜索边坡潜在滑动面并计算安全系数的方法之一。  相似文献   

Estimation of statistical parameters for censored lognormal hydraulic conductivity measurements     

Xian-Huan Wen 《Mathematical Geology》1994,26(6):717-731

Field tests of hydraulic conductivity (e.g., injection test, pumping test, etc.) in low permeability formations are subject to censoring due to the detection limit of the instruments used. An iterative method of estimating the mean and variance of hydraulic conductivity data with a presumed log-normal distribution function is presented. This method accounts for the data that are actually below the lower detection limit (called truncated data) and thus gives distribution parameters that are more representative for the underlying distribution. The proposed method is then tested on two simulated normally distributed random datasets having different variances. The results show that the means and variances estimated by the proposed method are very accurate. Finally, the method is used to estimate the mean and variance of hydraulic conductivity data from single hole water injection tests in a fractured geological formation.  相似文献   

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill     

Heechan Cho  Hoon LeeYeongwoo Lee 《International Journal of Mineral Processing》2006

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.  相似文献   

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses     

LI Hong-jun  CHI Shi-chun  LIN Gao 《岩土力学》2006,27(Z1):1063-1068

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.  相似文献   

Break out resistance of inclined anchors in sand     

Shubhra Goel  Shalini  Nihar Ranjan Patra 《Geotechnical and Geological Engineering》2006,24(6):1511-1525

Inclined anchors are widely used in a variety of civil engineering problems to resist oblique loads, most relevant being in transmission towers and in rocks and dams for structural strengthening. In the present study, the breakout resistance of the inclined anchors in sand has been worked out using limit equilibrium approach. The breakout resistance has been calculated for different soil friction angles with varying relative depth ratio and anchor inclination. The break out factor increases continuously with the inclination of the anchor. A comparison of predicted values of break out resistance of anchors by the proposed analysis with the experimental values as reported by the other researchers showed reasonably good agreement.  相似文献