黑色页岩与土壤重金属污染   总被引：6，自引：1，他引：5  

余昌训  彭渤  唐晓燕  谢淑容  吴甫成  尹春艳  杨广  涂湘林 《矿物岩石地球化学通报》2008,27(2)

本文利用ICP—MS等技术分析了湘中地区黑色页岩及其相应土壤的重金属含量,在对分析结果进行统计分析的基础上,探讨了黑色页岩与土壤重金属污染的关系。研究表明,黑色页岩是富集多种重金属元素的特殊岩石。以黑色页岩岩系为母岩的土壤,不仅明显富集Cu、Cd、Cr、Co、Pb、Zn、Mo、Ni、V、U、Sn、Sb、T1、Th等多种重金属元素,而且受到Mo、Sb、Cd、U、Tl、Cu、V、Sn、Th等重金属的污染,其中以Mo、Cd、Sb、U、Tl等的污染尤为严重。黑色页岩土壤重金属污染在一些地方已产生明显的负面环境效应,值得关注。  相似文献   

内蒙古敖包吐萤石矿床地质和地球化学特征   总被引：2，自引：0，他引：2  

许东青  聂凤军  江思宏  张万益  云飞  杨才  张天俊  吕旭光  林日亮 《地球学报》2008,29(4):440-450

笔者总结了敖包吐萤石矿床的地质特征,并通过萤石的稀土元素的地球化学和Nd同位素研究,探讨了该矿床的成矿作用和成矿物质来源。敖包吐萤石矿床产出于下二叠统大石寨组火山—沉积岩与燕山中期花岗岩的接触带,为单一萤石矿床。萤石矿石的稀土元素的含量(∑REE)变化范围为(8.04～30.04)×10-6,平均为19.42×10-6;轻重稀土LREE/HREE值0.24～0.65,平均0.52;LaN/YbN为0.07～0.62,平均0.26;δEu为0.42～0.90,平均0.60,具Eu负异常和明显重稀土富集的特征。岩矿石的Nd同位素研究表明,萤石矿石的εNd(t)都表现为很大的负值,以成矿主期年龄138Ma计算的εNd(138Ma)为-7.30～-30.55,具有古陆壳的演化特征,暗示其成矿的物质来源主要是壳源物质。在Moller的Tb/La-Tb/Ca成因判别图解中,敖包吐矿床的萤石的结晶作用表现为重新活化的趋势,反映流体具有混源的特征,既有热液成因,又有沉积成因。二叠世的海相火山活动通过海底喷气和喷流的作用形成了初始矿源层,而燕山中期花岗岩浆的侵位与结晶分异,又对初始矿源层的活化和富集提供了流体和热能的来源。成矿流体在经历了长期的演化后在大石寨组的构造薄弱破碎的的部位沉淀析出,形成敖包吐萤石矿床。  相似文献   

贵州梵净山地区震旦系微量元素特征及沉积环境   总被引：4，自引：0，他引：4  

熊国庆  王剑  胡仁发 《地球学报》2008,29(1):51-60

为了详细研究梵净山地区震旦系沉积地球化学特征及沉积环境演化,笔者对该处永义剖面自下而上进行系统采样.样品分析结果表明该处剖面稀土元素呈轻稀土(LREE)富集,重稀土(HREE)亏损,铈总体上表现为亏损,垂向上逐渐变小,铕异常发生3次波动,表明该处震旦系沉积时总体上为氧化环境,局部沉积环境发生变化.而且陡山沱组底部"碳酸盐帽"稀土元素标准化分配模式不同于冷泉碳酸盐岩分配模式,表明两者处于不同的沉积环境,成因上无关.V/Cr、Ni/Co、U/Th及V/V Ni等微量元素比值均表明震旦系沉积时为总体上氧化环境,但垂向上仍有沉积环境及水体分层性的变化.  相似文献   

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments     

D. Pardo  C. Torres-Verdín  M. Paszynski 《Computational Geosciences》2008,12(1):83-89

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.  相似文献   

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity     

Phillip Joseph Phillips  Mary F. Wheeler 《Computational Geosciences》2008,12(4):417-435

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.  相似文献   

Fractional crystallization models and B–Be–Li systematics at Mt Somma-Vesuvius volcano (Southern Italy)     

Angelo Paone 《International Journal of Earth Sciences》2008,97(3):635-650

A compilation of B–Be–Li data on rocks that cover the entire eruptive history of Somma-Vesuvius is presented and interpreted in the light of evolution models for the Somma-Vesuvius rocks. Using major and trace element data, fractional crystalllization models are presented for different geochemical units. These data were used to constrain the source mineralogy of the Somma-Vesuvius rocks (ol-opx-cpx-gar-amp of 0.4-0.3-0.1-0.1-0.1), the amount of sediment added (5–10%) and the melt fraction from batch partial melting computations (0.05–0.1). From the B–Li data it is inferred that the main process responsible for the B isotopic signature is sediment recycling. However, the B–Li data show a major variation in Li abundances respect to B which is explained with Li dehydration before the fluid enriched the mantle wedge that produced the arc magmas. The Somma-Vesuvius B isotope composition is intermediate between that of the Campi Flegrei and the broad field of the Eolian Island arc. A low Be isotopes in the recent volcanic rocks can be explained as: (a) the top 1–22 m of the incoming sediment is accreted, (b) large amounts of sediment erosion, (c) a slow rate of subduction which have provoked a long magmatic history for the Vesuvius magma, (d) the sediment component takes several Myr longer than the subducting plate to reach the magma source region beneath Italy.  相似文献   

太原盆地农田区大气降尘对土壤重金属元素 累积的影响及其来源探讨   总被引：1，自引：0，他引：1  

赖木收  杨忠芳  王洪翠  周继华  王建武 《地质通报》2008,27(2):240-245

通过研究太原盆地大气干湿沉降中重金属元素的含量分布特征及年输入通量,讨论其对土壤中重金属元素累积的影响。同时采用富集因子法探讨降尘物质的来源。研究结果表明,降尘中重金属元素As、Cd主要来源于人为活动,Pb的来源可能是人为源和自然源。而Hg则主要来源于自然源。  相似文献   

滇西沘江流域水体中重金属元素的地球化学特征   总被引：6，自引：1，他引：5  

李瑞萍  王安建  曹殿华  王高尚  李以科  耿诺 《地质通报》2008,27(7):1071-1078

通过测定流经兰坪金顸铅锌矿区的沘江水体中Pb、Zn、Cd、As的含量和底泥中重金属元素的化学形态的含量,分析了重金属元素的分布和化学形态的变化。结果表明,沘江水遭到了Cd污染,底泥已经成为重金属元素的蓄积库,以国家土壤环境质量标准（Ⅲ级）衡量,Pb、Zn、Cd和舡分别超标3．4倍、15．8倍、106倍和2．6倍。沘江水中重金属元素含量的峰值在矿山附近的下游,而底泥中重金属元素的峰值在矿山下游30-50km的地方,矿业活动、水流变缓、pH等水体环境条件的变化都能影响水和底泥中重金属元素的含量。底泥中的Pb以碳酸盐结合态为主,Zn和Cd以铁锰氧化物结合态为主,而As以残渣态为主。Pb、Cd、Zn三种元素的环境有效态含量比较高,对沘江流域生态环境具有潜在的巨大的危害。  相似文献   

An overview of focuses of research on otolith element characteristics and general testing methods     

GAO Yong-Hua LI Qing-Rong LIN Dong-Ni JIAO Chi FENG Qiang-Ling 《地学前缘》2008,15(6):11

  相似文献   

The discovery of metal trace elements in natural gas and its ecologic environmental significance.     

WANG Che-Xi DENG Mei-Zhou LIU Ying-Han LIU E-Wei LI Nie-Yun LU Ren-Ji 《地学前缘》2008,15(6):124

  相似文献