基于有限杆单元法的陡坡基桩非线性分析     

赵明华  陈耀浩  杨超炜  肖尧 《岩土力学》2018,39(8):3020-3028

根据陡坡段桥梁基桩承载特性,提出了一种可考虑桩土非线性作用的基桩内力与位移分析有限杆单元方法。首先,基于单元划分结果,结合桩侧摩阻力和坡体侧向推力的分布规律,得到了相应的等效结点荷载向量表示方法;其次,在线弹性地基反力法的基础上,引入p-y曲线开展了桩周土抗力非线性分析,并结合桩身P-?效应（P为桩顶轴向荷载,?为桩顶水平位移）计算方法给出了单元刚度矩阵修正方法,进而提出了适用于基桩内力位移非线性分析的有限杆单元法并编制了MATLAB计算程序;最后,结合某工程实例,将计算结果与工程实测值及已有理论值进行对比。结果表明：考虑桩土非线性作用的计算方法是合理的;当桩身具有自由段时,P-?效应对基桩内力位移的影响较大,在实际工程设计中不可忽视。  相似文献   

一种基于有限元的岩石圈长期变形数值计算方法   总被引：3，自引：3，他引：0  

杨少华  李忠海 《地质力学学报》2018,24(6):768-775

有限单元法以其灵活性和精确性,成为固体地球科学中广为使用的数值方法。从短周期的地震活动到长周期的岩石圈变形、地幔对流,甚至行星演化,有限单元法几乎在固体地球科学的各个领域都占据着十分重要的位置。随着研究的深入,某些特定的地学问题给有限元计算带来挑战,尤其是岩石圈尺度大变形的数值计算,比如俯冲带的演化、剪切带中塑性流变导致的应力集中。基于显式有限元,尝试考虑粘弹塑性岩石圈大变形过程的数值计算。应用Marker-In-Cell（MIC）方法处理物质迁移。在描述基本原理和流程的基础上,对粘弹性变形、弹塑性变形、大变形过程及热传递过程等核心模块分别做了基准测试,而这四个模块是模拟岩石圈长期变形的关键。由测试结果和其他学者的（解析或数值）研究结果比对情况来看,受测试的核心模块基本达到了测试要求。可以预见,现有的基本算法可以满足研究岩石圈大变形的需要,进一步的具体研究工作将探讨这类问题。从科学问题层面讲,逐渐复杂的科学问题有利于数值模型的成熟。已达到基准测试的数值方法对下一步开展一些具体的地球动力学数值模拟研究有实际意义。   相似文献   

CE3玉兔号月球车APXS特征X射线能谱信息分析     

刘菁华  王文华  陈圣波  周大鹏 《吉林大学学报(地球科学版)》2018,48(2):445-450

通过对CE3玉兔号月球车粒子激发X射线谱仪（APXS）获取的数据进行处理,获得测点的累积特征X荧光计数率谱线,经小波滤波,消除放射性涨落对X荧光谱线的影响。由能量刻度获得了月球车着陆点月壤元素X射线特征能量峰,由此分析了着陆点月壤元素的成分,得知测量点月壤元素成分包括Si、Ca、Al、Mg、K、P、S、Fe、Ti、Ni、Cr、Mo、Sr、Y、Zr、Nb。研究结果为月陆地质演化提供了有利的参数制约。  相似文献   

任意各向异性介质三维有限元航空电磁响应模拟     

曾昭发  霍祉君  李文奔  李静  赵雪宇  何荣钦 《吉林大学学报(地球科学版)》2018,48(2):433-444

在航空电磁探测方法应用中,地下探测环境复杂,地下介质物性参数存在各向异性特征。如果采用常规各向同性介质模型,在资料解释过程中会产生严重的偏差。本文基于矢量有限元法开展三维任意各向异性频率域航空电磁响应模拟计算研究。首先,将总场分解成一次场和二次场,对空气介质的均匀全空间进行一次场解析计算,同时利用矢量有限元法对二次电场的双旋度方程进行求解。为提高求解速度,采用共享内存直接求解器PARDISO对大规模稀疏矩阵并行计算,大大提高了三维模型的计算速度。之后开展了4种典型目标模型的三维各向异性介质模拟：围岩各向同性-目标体各向异性（绕z轴旋转）模型;围岩各向同性-目标体各向异性（绕x轴旋转）模型;围岩各向异性-目标体各向异性（绕z轴旋转）模型;围岩各向异性-目标体各向异性（绕x轴旋转）模型。对比分析了不同模型在不同旋转角度情况下,磁场实虚分量的变化特征,进而总结了各向异性参数对航空电磁响应的影响规律和识别方法。  相似文献   

The effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines     

《Applied Ocean Research》2017

The paper presents the effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines using both analytical and numerical methods. Firstly, in the hydrodynamic design procedure, the optimal profiles of untwisted and twisted blades and their predicted theoretical turbine performance are obtained using the genetic algorithm method. Although both blade profiles produce desired rated rotational speed, the twisted blade achieves higher power and thrust performance. Secondly, numerical simulation is performed using sliding mesh technique to mimic rotating turbine in ANSYS FLUENT to validate the analytical results. The Reynolds-Averaged Navier-Stokes (RANS) approximation of the turbulence parameters is applied to obtain the flow field around the turbine. It is found that power and axial thrust force from BEMT (Blade Element Momentum Theory) method are under-predicted by 2% and 8% respectively, compared with numerical results. Afterwards, the downstream wake field of the turbine is investigated with two different nacelle shapes. It is found that the rotor performance is not significantly affected by the different nacelle shapes. However, the structural turbulence caused by the conventional nacelle is stronger than that by the NACA-profiled shape, and the former can cause detrimental effect on the performance of the downstream turbines in tidal farms.  相似文献   

Behavior of drag anchor in clay with linearly increasing shear strength under unidirectional and combined loading     

《Applied Ocean Research》2017

Drag anchor is a widely used economical anchor option for offshore floating structures. The anchor behavior under unidirectional loading and combined loading is important for anchor selection. The anchor behavior under combined loading, characterized by the yield envelope, can also be used for the prediction of anchor installation, which is still an issue in anchor design. However, most existing studies on anchor capacity are for plate anchors which focused only on the anchor pullout capacity in soil with uniform shear strength. The behavior of drag anchor under unidirectional and combined loading in soil with linearly increasing shear strength profile is seldom investigated. The current 2D finite element studies investigate the anchor behavior for a horizontal anchor fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then based on the results of anchor unidirectional loading behavior, the yield envelopes for anchor under combined loading for both shallow and deep embedded flukes are studied. The effect of anchor embedment depth, soil non- homogeneity, soil overburden pressure and the soil/anchor interface breakaway conditions are studied to provide insight for drag anchor design.  相似文献   

高压密闭消解-电感耦合等离子体光谱和质谱联合测定海洋地质样品中52种元素   总被引：4，自引：0，他引：4  

高晶晶  刘季花  李先国  鄢全树  王小静  汪虹敏 《海洋学报(英文版)》2017,36(1):109-117

An improved analytical method to determine the content of 52 major, minor and trace elements in marine geological samples, using a HF-HCl-HNO_3 acid system with a high-pressure closed digestion method(HPCD), is studied by an inductively coupled plasma optical emission spectrometry(ICP-OES) and an inductively coupled plasma mass spectrometry(ICP-MS). The operating parameters of the instruments are optimized, and the optimal analytical parameters are determined. The influences of optical spectrum and mass spectrum interferences, digestion methods and acid systems on the analytical results are investigated. The optimal spectral lines and isotopes are chosen, and internal standard element of rhodium is selected to compensate for matrix effects and analytical signals drifting. Compared with the methods of an electric heating plate digestion and a microwave digestion, a high-pressure closed digestion method is optimized with less acid, complete digestion,less damage for digestion process. The marine geological samples are dissolved completely by a HF-HCl-HNO_3 system, the relative error(RE) for the analytical results are all less than 6.0%. The method detection limits are 2–40μg/g by the ICP-OES, and 6–80 ng/g by ICP-MS. The methods are used to determine the marine sediment reference materials(GBW07309, GBW07311, GBW07313), rock reference materials(GBW07103, GBW07104,GBW07105), and cobalt-rich crust reference materials(GBW07337, GBW07338, GBW07339), the obtained analytical results are in agreement with the certified values, and both of the relative standard deviation(RSD) and the relative error(RE) are less than 6.0%. The analytical method meets the requirements for determining 52 elements contents of bulk marine geological samples.  相似文献   

吉林省白山市板石沟铁矿断裂构造地球化学特征     

穆宏玉  刘正宏  贾大成  李鹏川  路恩兰 《地质与资源》2017,26(5):479-488

断裂构造中元素的迁移变化规律是构造地球化学研究的主要内容.白山市板石沟铁矿断裂构造发育,是开展断裂构造地球化学研究的有利地区.通过对板石沟铁矿17矿组和赵家沟矿组典型逆断层剖面测量,采集构造岩和周围岩石,分析常量元素和微量元素,利用构造地球化学剖面法、质量等比线法和特征元素比值来反映元素在逆断层中分布特征和迁移变化规律.通过分析认为在逆断层中常量元素SiO₂、Fe₂O₃、CaO、Na₂O亏损,Al₂O₃、K₂O富集,微量元素中Rb、Sr等离子半径较大元素富集,离子半径较小元素Co、Cr、Ni亏损,K₂O/Na₂O、V/Cr、Rb/（Ni+Co）在逆断层中呈现出高值,SiO₂/Al₂O₃、（Fe₂O₃+CaO+MgO）/Al₂O₃呈现出低值.依据这些构造地球化学特征可以用来判断断裂构造的存在,为断裂构造地球化学研究和板石沟铁矿勘查提供构造地球化学依据.  相似文献   

古流体研究的无机地球化学方法综述   总被引：2，自引：2，他引：0       下载免费PDF全文

郭佳  牛博 《中国地质调查》2017,4(1):45-49

研究与成藏过程相关的古流体活动有助于深入认识油气成藏过程,从经济目的出发预测储层质量,精确分析不同阶段古流体活动对油气成藏的影响具有重要意义。目前国内外石油地质学家主要利用同位素地球化学、元素地球化学、流体包裹体分析等无机地球化学方法分析古流体活动特征及其对油气成藏的影响。在归纳前人研究成果的基础上,总结了各种无机地球化学方法的最新研究进展,认为同位素地球化学方法有助于分析古流体来源与成因,元素地球化学方法可示踪烃类流体的运移,流体包裹体分析技术结合岩相学研究可分析油气运移的时间、期次、相态、通道和油气藏的富集规律,并指出油气运移和聚集的有利方向。在运用无机地球化学方法研究古流体活动时不应局限于单一方法,综合利用多种无机地球化学方法更有利于全面分析古流体活动特征。  相似文献   

新型贴井壁式阵列方位侧向测井数值模拟与响应特性          下载免费PDF全文

高建申  孙建孟  于其蛟  崔利凯  姜艳娇 《地球物理学报》2016,59(3):1131-1142

在现有侧向测井仪器基础上,提出了一种新型贴井壁式阵列方位侧向测井电极系,该仪器能提供径向和周向方位电阻率测量.该电极系采用贴井壁测量方式,提供5种径向探测深度.利用三维有限元方法模拟了阵列方位侧向测井电极系的井眼影响特性、径向探测特性、纵向分层能力、方位分辨能力,并模拟其对井周地层、水平井非对称泥浆侵入和倾斜地层的响应.在导电泥浆中最大探测深度为1.23m,纵向分辨率为0.3m,可以识别出0.1m薄层,方位分辨率为20°.贴井壁测量时,纵向分辨率不受泥浆和围岩电阻率的影响,能够准确测量井周方位电阻率,较不贴井壁测量具有很大优势,同时利用12条方位电阻率曲线能够反映出水平井泥浆非对称侵入特性,倾斜地层倾角和倾斜方向.  相似文献