黑山金矿地质特征及找矿标志   总被引：1，自引：0，他引：1  

王军年  邵慧君  何晓刚 《新疆地质》2005,23(4):355-358

黑山金矿位于精河县托托河中游，地表圈定6条金矿体．矿体赋存于花岗斑岩体内接触带的破碎蚀变带中．矿床类型为断控脉状造山型，局部石英脉含Au较高．总结了金矿找矿标志。  相似文献   

HD-4002型综合测井仪     

陆士立  袁明  焦仓文  马艳芳  谢海宁  赵志明  李继红  于延斌 《铀矿地质》2005,21(3):183-192

HD 4002型综合测井仪是核工业北京地质研究院于1998年开始研制的, 其目标是为铀矿地质系统提供适合砂岩型铀矿勘查的轻便型数字测井仪, 满足测井生产的需要。该仪器于2001 年3月通过部级鉴定, 2002至2003年投入海拉尔盆地铀矿勘查测井试生产。本文介绍了仪器的用途、功能及特点、性能指标, 简要说明了各部分的工作原理。  相似文献   

直升机载频率域电磁系统在我国环境和工程勘查中的应用前景     

王卫平  王守坦 《铀矿地质》2005,21(5):306-309

本文根据国际上采用直升机载频率域电磁系统进行环境和工程勘查的应用效果,结合我国引进的航空电磁系统的性能和特点,探讨了采用直升机载频率域电磁系统在我国进行环境和工程勘查的应用前景。  相似文献   

煤田勘查超千米深孔快速钻进技术探讨     

耿建国彭桂湘  丁仲翔 《中国煤田地质》2005,17(6):50-51,57

针对目前国内煤田勘查主要机具及工艺技术方法存在的主要问题,结合煤田勘查地层地质条件和超千米深孔施工要求,研制了液压立轴式HTJ-2000型钻机和新型绳索取心钻具,并就配套设备选型、钻进工艺、钻进参数、泥浆指标及应用效果进行了阐述.该项技术的应用,已明显提高了钻效,使钻孔深度达到1 350m.  相似文献   

海底可视技术在天然气水合物勘查中的应用     

张汉泉吴庐山  张锦炜 《地质通报》2005,24(2):185-188

海底可视技术是一种可以直观地对海底地形地貌、表层沉积物类型、生物群落等进行实时观察的调查手段。本文介绍了海底摄像、电视抓斗、深拖系统和ROV四种海底可视技术，并对海底可视技术在南海北部陆坡天然气水合物勘查中的应用进行阐述。利用海底可视技术，在南海北部陆坡发现了天然气水合物气体“冷泉”喷溢形成的自生碳酸盐岩和活动于天然气水合物冷喷溢口或渗流口周围的菌席、双壳类、管状蠕虫等化能自养生物群，圈定出该陆坡由天然气水合物气体“冷泉”喷溢形成的巨型碳酸盐岩面积达430km^2。  相似文献   

风沙起电的风洞实验研究   总被引：3，自引：0，他引：3  

张鸿发  屈建军  言穆弘 《高原气象》2002,21(4):402-407

利用大型风沙物理风洞实验装置 ,模拟铺沙地面在不同风速条件下对不同粒径的沙样和混合沙的起电电场、电位和荷质比作实验测量。结果表明 :存在风沙起电效应。风洞内电场多为负极性 ,最大电场达到 - 2 9kV·m- 1 ,导线电位可达 12 0mV。沙粒越细 ,起电越强 ,且随风速增加而增大  相似文献   

Near Wall Flow over Urban-like Roughness   总被引：3，自引：35，他引：3  

Hong Cheng  Ian P. Castro 《Boundary-Layer Meteorology》2002,104(2):229-259

In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s^-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry.The results haveconfirmed the strong three-dimensionalityof the turbulent flow inthe roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can,together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves.The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the `roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.  相似文献   

Near-Wall Flow Development After A Step Change In Surface Roughness     

H. Cheng  Ian P. Castro 《Boundary-Layer Meteorology》2002,105(3):411-432

An experimental study of the initial flow field downstream of a step change in surface roughness is presented. The roughness length of the downstream surface was approximately tenfold that of the upstream roughness and, unlike all previous studies, attention was concentrated on the roughness sublayer region beneath the inertial (log-law) region. The experiments were conducted at a boundary layer Reynolds number of about 6 × 10⁴ (based on layer thickness andfree-stream velocity) and around a longitudinal location where the (downstream) roughness length, z_o2, was about 1% of the boundary-layer thickness atthe roughness change point.The thickness of the roughness sublayer was found for the two roughness. It was observed that the vertical profiles of mean velocity and turbulence characteristics started to show similarity after about 160z₀₂ downstream of the roughness change. The presence of a shear stress overshoot is shown to depend strongly on the precise location (with respect to the roughness elements) at which the measurements are made and the thickness of the equilibrium layer is shown to be very sensitive to the way it is defined. It is demonstrated that the growing equilibrium layer has first to encompass the roughness sublayer before any thickness of inertial sublayer can be developed. It follows that, in somepractical cases, like flows across some urban environments, the latter(log-law) region may never exist at all.  相似文献   

隧道塌方的尖点灾变模型及应用   总被引：8，自引：0，他引：8  

刘贵应  刘新喜  魏新颜 《地质灾害与环境保护》2002,13(2):59-62

针对隧道塌方失稳问题，运用灾变理论建立隧道塌方失稳的尖点灾变模型。基于平衡曲面方程，可求得隧道围岩体内承载区介质刚度与对应的松驰区弱化介质本构曲线拐点处理刚度之比值K，并给出了塌方与否的判据，当K≤1时，隧道将发生塌方失稳；当K＞1时，隧道将不会发生塌方失稳。根据此模型，笔者解释了隧道中几种常见的灾变破坏机理，并提出了相应的治理方案。  相似文献   

河南省洛阳—三门峡铝土矿地质特征及其勘查开发前景   总被引：8，自引：0，他引：8       下载免费PDF全文

陈全树  何文平  周迪 《地质找矿论丛》2002,17(4):252-256,270

河南省洛阳-三门峡的铝土矿，是赋存于中石炭统本溪组的一水硬铝石型沉积铝土矿。本区不仅蕴藏量多，而且有相当数量的富铝土矿，勘查开发潜力大，前景广阔。  相似文献