提高机采水平的配套技术及应用     

张健泉  吴凤英  师清磊 《海洋地质译丛》2008,(4):70-72

随着濮城油田的持续性高速开发,油田综合含水逐渐上升,油水井井况进一步恶化,作为油田生产主体的机械采油井躺井频繁、管杆泵使用寿命缩短。近几年中原油田采油二厂濮城油田年平均躺井数达560井次之多,导致机械采油井维护费用增加,管杆泵投入增大,严重制约着油田的生产和经营。通过加缓蚀剂在油管内壁形成保护油膜,起到润滑作用;应用特殊抽油杆防腐止磨;应用尼龙扶正器对抽油杆体扶正,避免了钢体与钢体的硬磨;应用旋转井口通过地面人力转动改变油管与抽油杆的偏磨面;配合合理生产参数;各种配套技术的合理应用,使濮城油田躺井减少,避免了频繁作业,增加长寿井,管杆泵投入节约了19.3%。  相似文献   

干涸尾闾湖盆区泥漠地表磨蚀释尘特征     

曲书锋  张国明  刘连友  李力  肖雨婷  向明珠  孙煦然  韩旭娇 《中国沙漠》2022,42(4):81-88

沙粒的表面磨蚀效应是地表产尘、释尘的重要机制,针对干湖盆泥漠地表开展磨蚀释尘实验研究,对理解干湖盆地表风蚀过程及盐碱尘暴形成机理具有重要意义。对采自西居延海干涸湖盆泥漠地表土样进行室内磨蚀模拟实验,研究了不同粒级（细、中、粗）沙粒不同落沙角度（30°,45°,60°）的磨蚀效应。结果表明：（1）泥漠地表磨蚀实验中能够产生明显释尘效应的沙粒粒级阈值为中沙（0.25 mm<M_d<0.50 mm）;（2）磨蚀粒径粒级相同时,磨蚀角度会对泥漠地表磨蚀释尘速率产生影响,磨蚀量的角度排序为60°>30°>45°,但同一粒级3种角度下的磨蚀释尘率差异不显著。（3）磨蚀角度为45°时,计算了泥漠地表的质量磨蚀率与能量磨蚀率,其中中沙为0.04 g·kg^-1、0.43 g·J^-1,粗沙为0.08 g·kg^-1、0.74 g·J^-1,极粗沙为0.26 g·kg^-1、2.54 g·J^-1;在磨蚀沙粒粒级倍增而磨蚀角度不变情况下,泥漠地表磨蚀释尘率与能量磨蚀率未发生正比例线性增长变化。  相似文献   

遥感影像变分Mask自适应匀光算法     

李烁  王慧  王利勇  于翔舟  杨乐 《遥感学报》2018,22(3):450-457

针对Mask匀光法对低通滤波器及其尺寸参数依赖的问题,提出一种变分Mask自适应匀光算法。根据影像自身的先验信息,结合Mask数学模型构造变分能量函数,分别利用各向异性和各向同性全变分正则项约束理想影像和背景影像,采用分裂Bregman方法交替迭代求解,可同时获取最优化背景影像和理想影像。利用3幅光照不均匀的遥感影像进行实验并与3种不同滤波尺寸的Mask匀光法进行了比较,本文方法在目视效果和定量评价指标上均呈现明显的优势,在消除亮度不均的同时能够保持影像的纹理和细节信息。  相似文献   

面向航空影像匀光的改进马斯克法     

张庆闯 《测绘科学》2015,40(5)

针对光学遥感影像匀光中的马斯克匀光方法的实现需要较大的滤波窗口,易导致匀光的结果对影像中的水体、阴影等存在较大的辐射增强,以及对影像的边缘处理有较大的误差等问题,该文提出改进的马斯克匀光方法:首先生成背景影像;然后对输入影像与获得的背景影像复合进行锐化增强;最后对锐化增强的结果进行拉伸处理。试验结果表明,该方法可以在滤波器窗口为3或5的情况下在对影像匀光的同时实现锐化增强。  相似文献   

菱刈矿床矿脉群形成的构造环境     

《地质与资源》1995,4(2):153-160

本文主要介绍菱刈矿床矿脉的赋存状态、裂隙体系分析、矿脉群赋存的构造环境。菱刈矿床属脉状浅成热液型金银矿床。矿床成因与裂隙系统的形成关系密切。矿脉群大致位于基底岩石(四万十层群)隆起的中央部位。  相似文献   

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction          下载免费PDF全文

Christian Auel  Ismail Albayrak  Tetsuya Sumi  Robert M. Boes 《地球表面变化过程与地形》2017,42(9):1384-1396

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

The effects of particle breakage and abrasion on the magnetic properties of two soils     

R. H. Crockford  J. M. Olley 《水文研究》1998,12(9):1495-1505

As mineral magnetism is used as a tracer for sourcing river and dam sediments, changes in the magnetic properties that may occur during transport between the source and sink must be considered. Abrasion and breakage of particles will occur during transport. These processes were examined in simulation experiments with a granitic and a sedimentary soil. The effects of these processes on the magnetic properties of a granitic and a sedimentary soil were examined using a simulated breakage/abrasion experiment. Breakage and/or abrasion had substantial effects on the magnetic properties of both soils. All particle sizes were affected, but the magnitude varied through the size range of derived particles. The major effect was on the concentration of magnetic minerals, with differences between the concentrations in particle sizes of the original material and those generated by the experiments being as much as 20 times. The effect on the granite soil was to reduce the concentrations, i.e. derived material was less than original material; whereas for the sedimentary soil the derived particles had higher concentrations. The effect on magnetic grain size, as indicated by the magnetic ratios, was less than the effect on the mass magnetic properties, but still substantial for some ratios for some sizes. © 1998 John Wiley & Sons, Ltd.  相似文献   

A worldwide correlation for exponential bed particle size variation in subaerial aqueous flows     

P. H. Morris  D. J. Williams 《地球表面变化过程与地形》1999,24(9):835-847

The particle size of the bed sediments in or on many natural streams, alluvial fans, laboratory flumes, irrigation canals and mine waste deltas varies exponentially with distance along the stream. A plot of the available worldwide exponential bed particle size diminution coefficient data against stream length is presented which shows that all the data lie within a single narrow band extending over virtually the whole range of stream lengths and bed sediment particle sizes found on Earth. This correlation applies to both natural and artificial flows with both sand and gravel beds, irrespective of either the solids concentration or whether normal or reverse sorting occurs. This strongly suggests that there are common mechanisms underlying the exponential diminution of bed particles in subaerial aqueous flows of all kinds. Thus existing models of sorting and abrasion applicable to some such flows may be applicable to others. A comparison of exponential laboratory abrasion and field diminution coefficients suggests that abrasion is unlikely to be significant in gravel and sand bed streams shorter than about 10 km to 100 km, and about 500 km, respectively. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

河南省修武县东交口新村房屋裂缝原因及     

刘富有  郑继荣  潘军战  张涛  贾元清 《地质灾害与环境保护》2009,20(4):30-33

东交口新村房屋裂缝是采空区地表变形、地表水入渗冲蚀和建筑荷载等众多因素综合作用的结果,主要归纳为二：1991年前,采空区未稳定,以采空区的地表残余变形破坏为主;1991年后,采空区基本稳定,以地表水的大量人渗冲蚀破坏为主。针对房屋裂缝的原因和主要影响因素,采取地表排水、采空区深孔注浆与“离层裂隙区”浅孔注浆加固相结合的综合治理方案,取得明显成效。  相似文献   

A New Formation Mechanism of Coesite without the Plate Deeply-Subduction and Fast-Exhumation——Comment on the Article “Discussion on Some Problems of Quartz-Coesite Phase Transition”     

SU Wenhui  XU Dapeng 《地质论评》2012,58(2)

本文分析评论了嵇少丞等(2010)发表的“石英—柯石英相变研究中若干问题讨论”一文.指出他们对柯石英非俯冲折返新机制的一些误解,对某些热力学、物理学概念,及其在地学问题中的解释理解的不同.分析了机械球磨的作用机制;论证了机械球磨作用本质与构造挤压剪切作用本质的同一性.分析了岩石糜棱岩化过程的两个阶段;讨论了地震波形成柯石英机制的可能性.围绕比较标准问题,论证了高能机械球磨(预处理)能大大降低α-石英转变成柯石英的压力、温度和合成时间,促进柯石英的形成.用小尺度不均匀局域高压微区模型解释了人工合成柯石英的规律性、南极洲天然矿物的行为,柯石英的寄生矿物、岩石——锆石、榴辉岩包裹体、非包裹体的形成.列举事例澄清了“球磨引进的Fe杂质提高柯石英形成压力迟缓合成”的说法;讨论了第二相存在对石英—柯石英转变的影响和“应变禁区”边界区的应力梯度相变驱动力可以形成柯石英问题.指出了机械球磨石英原料预处理和静高压合成柯石英后处理两步法,是一种实验室研究柯石英形成规律的有效物理方法;小尺度不均匀局域高压微区模型和无需板块深俯冲快折返的柯石英形成机制,是一种有希望的柯石英形成新机制.  相似文献