A STUDY ON THE FLOOD STORAGE CAPACITY IN DONGTING LAKE     

Yitian LI  Jinyun DENG  Zhaohua SUN 《国际泥沙研究》2003,18(2)

1 INTRODUCTION Dongting Lake lies south of the middle reach of the Yangtze River in Hunan and Hubei provinces (Fig. 1). On the north side of Dongting Lake, there are the three diversion openings of the Yangtze River named Songzi, Taiping, and Ouchi, and, on the south and west sides, there are the four tributary streams named Xiang, Zi, Yuan, and Li Rivers. The flow of the three diversion openings and the four tributary streams runs into Dongting Lake, and runs out at Chenglingji a…  相似文献   

Petrography and uplift history of the Quaternary Takidani Granodiorite: could it have hosted a supercritical (HDR) geothermal reservoir?     

Masatoshi Bando  Greg Bignall  Kotaro Sekine  Noriyoshi Tsuchiya   《Journal of Volcanology and Geothermal Research》2003,120(3-4):215-234

The Quaternary Takidani Granodiorite (Japan Alps) is analogous to the type of deep-seated (3–5 km deep) intrusive-hosted fracture network system that might support (supercritical) hot dry/wet rock (HDR/HWR) energy extraction. The I-type Takidani Granodiorite comprises: porphyritic granodiorite, porphyritic granite, biotite-hornblende granodiorite, hornblende-biotite granodiorite, biotite-hornblende granite and biotite granite facies; the intrusion has a reverse chemical zonation, characterized by >70 wt% SiO₂ at its inferred margin and <67 wt% SiO₂ at the core. Fluid inclusion evidence indicates that fractured Takidani Granodiorite at one time hosted a liquid-dominated, convective hydrothermal system, with <380°C, low-salinity reservoir fluids at hydrostatic (mesothermal) pressure conditions. ‘Healed’ microfractures also trapped >600°C, hypersaline (35 wt% NaCl_eq) fluids of magmatic origin, with inferred minimum pressures of formation being 600–750 bar, which corresponds to fluid entrapment at 2.4–3.0 km depth. Al-in-hornblende geobarometry indicates that hornblende crystallization occurred at about 1.45 Ma (7.7–9.4 km depth) in the (marginal) eastern Takidani Granodiorite, but later (at 1.25 Ma) and shallower (6.5–7.0 km) near the core of the intrusion. The average rate of uplift across the Takidani Granodiorite from the time of hornblende crystallization has been 5.1–5.9 mm/yr (although uplift was about 7.5 mm/yr prior to 1.2 Ma), which is faster than average uplift rates in the Japan Alps (3 mm/yr during the last 2 million years). A temperature–depth–time window, when the Takidani Granodiorite had potential to host an HDR system, would have been when the internal temperature of the intrusive was cooling from 500°C to 400°C. Taking into account the initial (7.5 mm/yr) rate of uplift and effects of erosion, an optimal temperature–time–depth window is proposed: for 500°C at 1.54–1.57 Ma and 5.2±0.9 km (drilling) depth; and 400°C at 1.36–1.38 Ma and 3.3±0.8 km (drilling) depth, which is within the capabilities of modern drilling technologies, and similar to measured temperature–depth profiles in other active hydrothermal systems (e.g. at Kakkonda, Japan).  相似文献   

Nonlinear Rate Dependent Model of High Damping Rubber Bearing     

Robert Jankowski 《Bulletin of Earthquake Engineering》2003,1(3):397-403

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Efficiency of base isolation systems in structural seismic protection and energetic assessment     

Giuseppe Carlo Marano  Rita Greco 《地震工程与结构动力学》2003,32(10):1505-1531

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

山东惠民凹陷中央隆起带古近系沙河街组层序地层特征及控制因素研究   总被引：2，自引：0，他引：2  

杨剑萍  许正豪  姜在兴  操应长  陈发亮 《沉积学报》2003,21(4):670-674

结合山东惠民凹陷中央隆起带古近系层序地层学研究,依据层序中湖平面变化特点和相应的沉积物特征,提出了构造运动和气候是本区层序地层发育的主要控制因素。中央隆起带古近系沙河街组二、三、四亚段可划分为 3种层序类型,即断陷初期型、强断陷期型和断陷后期型层序。由于构造运动导致湖岸线向盆地方向退缩,产生下降体系域,本次研究采用了体系域的四分法,即一个完整层序由低位、湖侵、高位和下降四个体系域组成,并且层序界面位于湖平面最大下降的位置,介于下降域和低位域之间。断陷初期红色地层层序,受气候因素控制明显,既不同于冲积地层层序,也不同于正常湖相地层层序,在层序演化上有其独特的特点。受构造作用和沉积物补给条件的影响,研究区发育三种沉积密集段,不同类型的沉积密集段在层序中所处位置不同,控制着不同的烃源岩厚度和油气资源储量。  相似文献   

华山新生代隆升-剥蚀历史的裂变径迹热年代学分析   总被引：10，自引：0，他引：10  

吴中海  吴珍汉  万景林  周春景 《地质科技情报》2003,22(3):27-32

综合分析前人的热年代学数据发现华山地区自晚白垩世以来至少经历了三次快速隆升阶段，在120—57Ma间华山经历了缓慢隆升过程，约57Ma以来华山开始相对渭河地堑的快速隆升。其中，57—42Ma间、32—22Ma间和约8Ma以来均为相对快速隆升阶段，视隆升速度约为0．18～0．23mm／a；而42—32Ma问和22～8Ma间则为相对缓慢隆升过程，视隆升速度约为0．01mm／a。约57Ma以来华山的隆升—剥蚀量约为8．5km，平均隆升速度约为0．15mm／a；约32Ma以来的总隆升幅度约为4．5～5．1km，平均视隆升速度约为0．14～0．16mm／a。晚中生代以来华山的隆升过程实际上反映的是东秦岭的隆升过程，与区域地貌结构和周缘断陷盆地的演化过程有密切的成因联系，它表明东秦岭地区的三级等高峰顶面是120—57Ma、42—32Ma和22～8Ma间山脉缓慢隆升—剥蚀的结果，同时反映57—55Ma是渭河盆地开始快速裂陷和秦岭北麓正断层开始强烈活动的时间。  相似文献   

武汉市高层建筑岩土工程问题分析     

谭松林  江权 《水文地质工程地质》2003,(Z1)

武汉市是华中地区最大的城市,改革开放以来,兴建了许多高层建筑。高层建筑尤其是超高层建筑的主要特点是高度大、重心高、基底压力大及基础埋深大等。而武汉地区的地质条件又比较复杂,就第四纪地层而言,从最新沉积的各类软土如人工填土、淤泥类土、软塑状粘性土等,到全新世(Q4)沉积的各类砂土与卵砾石,直至晚更新世(Q3)及其以前沉积的老粘土均有分布。各类土层的厚度、深度及性质均变化较大。因此武汉地区高层建筑的岩土工程问题就显得复杂与多样,在众多复杂的岩土工程问题中,本文主要分析了比较突出的基础持力层与基础类型的确定,深基坑开挖中的边坡滑移、基坑涌水、流砂、突涌以及基坑防护等。通过对这些问题的分析,从中可以得出一些规律,对今后高层建筑的兴建具有一定的指导作用。  相似文献   

岩体变形模量的尺寸效应   总被引：2，自引：0，他引：2  

喻勇  肖国强  王法刚 《岩土力学》2003,(Z1)

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。  相似文献   

青藏及邻区新生代火山活动及构造演化   总被引：12，自引：0，他引：12       下载免费PDF全文

邓万明 《地震地质》2003,25(Z1):51-61

青藏高原是现今地球动力学和地质演化研究的一个热点。该区火山活动受中 -新生代以来高原深部地球物理 -化学反应的控制 ,是多种因素相互作用所表现的形式和结果。本区既有富钾质的 (主导 ) ,也有富钠质的火山岩 (次要 ) ;既有喷发熔岩流 (主导 ) ,也有一些浅源上侵的次火山岩体 ;火山活动发育在古近纪、新近纪与第四纪 ,而最强烈的发生在中新世期间。本区钠质和钾质两类火山岩在形成环境和时代上有很大的差异 :前者一般发育在古新世—始新世 (6 0～ 4 0MaBP) ,而后者主要形成在渐新世—中新世 (30～ 10MaBP) ;存在着钠质—钾质—酸性次火山岩的演化过程 ;大体上可划分为西羌塘、北羌塘、可可西里、中昆仑、西昆仑等 5个火山岩省。本文对比了青藏高原及邻区甘肃礼县和云南三岩区 (金沙江北段、腾冲和滇东南地区 )新生代火山岩的岩石组合、同位素年代学以及地球化学特征 ,大量的证据表明 ,这些火山岩形成在原始地幔、或“壳 -幔过渡带”或陆壳基底等源区。在实际考察和综合研究的基础上 ,探讨了岩石圈的区域构造特征及其与高原隆升的关系等  相似文献