土壤有机碳同位素样品制备过程的影响因素讨论   总被引：3，自引：1，他引：3  

曹蕴宁  刘卫国  宁有丰  张庆乐  王政 《地球化学》2005,34(4):91-100

土壤有机碳同位素地球化学在气候和植被恢复方面的研究已得到广泛应用,但目前对不同类型、不同时代的土壤总有机碳同位素样品制备过程的系统研究较少.本文选取黄土高原不同地区、不同类型的现代土壤和古土壤,对其有机碳同位素样品制备过程进行了较系统的研究.( 1)去除土壤中无机碳酸盐对有机碳同位素组成的干扰:对于现代土壤样品,在室温条件下,用 0.5～ 6 mol/L HCl反应 1 d去除碳酸盐,均可获得理想数据;在 70 ℃反应条件下,用 0.5～ 2 mol/L HCl反应 2 h去除碳酸盐可获得理想数据,但用 6 mol/L HCl,δ 13C值偏负 0.65‰;( 2)在 850 ℃氧化温度条件下,样品制备加铜丝,对现代土壤及古土壤样品的δ 13C值均没有影响,结果表明在用封管法进行现代土壤及古土壤的有机碳同位素样品制备时,可以不加铜丝;( 3)对于有机碳含量较高的有机碳标准物质、植物和现代土壤样品,在 850 ℃氧化条件下,恒温 2.5 h,足以保证样品有机质氧化完全,不会产生同位素分馏;对于深层黄土和红粘土样品,由于样品体系复杂,在上述氧化条件下难以获得理想数据,合适的氧化条件有待进一步深入研究.  相似文献   

山东泰安朱家庄自然硫矿床地质概要     

郝尔宏 《化工矿产地质》2005,27(3):129-138,149

山东省泰安朱家庄自然硫矿床,赋存于鲁西断隆古近纪汶东陆相盆地。自然硫矿层在汶口组二段上亚段,泥质灰岩-含泥灰岩-含云灰岩-石膏岩韵律层中的白云岩-石膏岩层段发育。自然硫以胶态、晶态、土态3种形态产出,可划分为顺层型、准顺层型、斑杂型及不顺层型4大类10余种矿石类型。从矿区去膏化作用普遍、自然硫与石膏-硬石膏分别富集轻-重同位素的特征、油气显示明显及地下水主要径流方向自然硫矿化最强等各种证据,表明该矿属生物后生成因的矿床。  相似文献   

复杂条件下深圳汝南大厦基础工程方案的优选与实践     

周嘉陵  兰凯 《地质科技情报》2005,24(Z1):93-96

位于复杂地质条件和环境条件下的深圳汝南大厦在基坑支护的施工过程中出现钻进困难,必须重新选择基础工程施工方案.结合场地特殊地质和环境条件在对人工挖孔桩、换填法、树根桩法、旋喷桩复合地基等8种基础工程施工方案进行分析与优选的基础上,借助模糊决策理论进行方法优选验算,最终选定了人工挖孔桩加部分钻(冲)成孔灌注桩的方案.采用该方案在深圳市汝南大厦的施工实践表明其施工效果良好.  相似文献   

复杂条件下的地下管线探测技术   总被引：6，自引：0，他引：6  

杨向东  聂上海 《地质科技情报》2005,24(Z1):129-132

以深圳市某大道顶管施工地下管线的探测成果为例,研究了在复杂场地条件下,探测地下管线的地球物理方法和技术,着重研究了电磁感应探测法.认为在复杂条件下,对钢质煤气管,应采用电磁感应探测法;对钢质或铁质给水管,应采用直接法;对电力管和电信管,应尽量采用夹钳法;对排水(管)渠等非金属材质管线,应采用地质雷达探测的方法.  相似文献   

江西修水西部金矿成矿地质条件分析     

张振 《城市地质》2005,17(2):20-25

通过对地层、岩浆岩、构造及化探异常与成矿关系的分析，认为江西修水西部地区具有寻找中一大型金矿床的潜力。  相似文献   

泥石流运动衰减动力学初步研究     

陈洪凯唐红梅  吴四飞 《中国地质灾害与防治学报》2005,16(B12):56-61

我国公路泥石流病害严重，泥石流淤埋公路构建筑物是一类常见的公路泥石流病害类型。泥石流衰减动力学是防治泥石流淤埋病害的重要关键技术，也是泥石流运动学、动力学研究的核心问题之一。本文作者运用泥沙运动力学及流体力学原理，初步建立了泥石流固相颗粒和液相浆体的能量衰减条件，把泥石流衰减模式概化为两类，即能量抑制衰减和能量自由衰减；通过泥石流沉积模型试验，得到了不同粘度泥石流体的沉积扇变化形态，随着泥石流体粘度的增大，沉积扇边缘变陡、扩展范围变小、纵轴线长度减小等结论与实际情况吻合；初步建立了泥石流能量衰减速率计算方法。研究成果为防治公路泥石流病害奠定了基础。  相似文献   

A cavity expansion–based solution for interpretation of CPTu data in soils under partially drained conditions     

Pin-Qiang Mo  Xin-Wei Gao  Wenbo Yang  Hai-Sui Yu 《国际地质力学数值与分析法杂志》2020,44(7):1053-1076

A cavity expansion–based solution is proposed in this paper for the interpretation of CPTu data under a partially drained condition. Variations of the normalized cone tip resistance, cone factor, and undrained-drained resistance ratio are examined with different initial specific volume and overconsolidation ratio, based on the exact solutions of both undrained and drained cavity expansion in CASM, which is a unified state parameter model for clay and sand. A drainage index is proposed to represent the partially drained condition, and the critical state after expansion and stress paths of cavity expansion are therefore predicted by estimating a virtual plastic region and assuming a drainage-index–based mapping technique. The stress paths and distributions of stresses and specific volume are investigated for different values of drainage index, which are also related to the penetration velocity with comparisons of experimental data and numerical results. The subsequent consolidation after penetration is thus predicted with the assumption of constant deviatoric stress during dissipation of the excess pore pressure. Both spherical and cylindrical consolidations are compared for dissipation around the cone tip and the probe shaft, respectively. The effects of overconsolidation ratio on the stress paths and the distributions of excess pore pressure and specific volume are then thoroughly investigated. The proposed solution and the findings would contribute to the interpretation of CPTu tests under a random drained condition, as well as the analysis of pile installation and the subsequent consolidation.  相似文献   

Suspended sediment and total dissolved solid yield patterns at the headwaters of Urumqi River,northwestern China: a comparison between glacial and non‐glacial catchments          下载免费PDF全文

Wenhua Gao  Shu Gao  Zhongqin Li  X. X. Lu  Mingjun Zhang  Shengjie Wang 《水文研究》2014,28(19):5034-5047

In order to understand the differences in the suspended sediment and total dissolved solid (TDS) yield patterns between the glacial and non‐glacial catchments at the headwaters of Urumqi River, northwestern China, water samples were collected from a glacier catchment and an empty cirque catchment within the region, during three melting seasons from 2006 to 2008. These samples were analyzed to estimate suspended sediment and TDS concentrations, fluxes and erosion rates in the two adjoining catchments. There were remarked differences in suspended sediment and TDS yield patterns between the two catchments. Suspended sediment concentrations were controlled mainly by the sediment source, whereas TDS concentrations were primarily related to the hydrologic interaction with soil minerals. Generally, the glacial catchment had much higher suspended sediment and TDS yields, together with higher denudation rates, than the non‐glacial catchment. Overall, glacial catchment was mainly dominated by physical denudation process, whereas the non‐glacial catchment was jointly influenced by physical and chemical denudation processes. The observed differences in material delivery patterns were mainly controlled by the runoff source and the glacial processes. The melting periods of glacier and snow were typically the most important time for the suspended sediment and TDS yields. Meanwhile, episodic precipitation events could generate disproportionately large yields. Subglacial hydrology dynamics, glaciers pluck and grind processes could affect erodibility, and the large quantities of dust stored on the glacier surface provided additional sources for suspended sediment transport in the glacial catchment. These mechanisms imply that, in response to climate change, the catchment behaviour will be modified significantly in this region, in terms of material flux. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Displacement analytical prediction of shallow tunnel based on unified displacement function under slope boundary     

Fanchao Kong  Dechun Lu  Xiuli Du  Chenpeng Shen 《国际地质力学数值与分析法杂志》2019,43(1):183-211

For slope condition of ground surface, the asymmetrical deformation about the vertical center line and the horizontal center line of the tunnel cross section can be formed. A unified displacement function expressed by the Fourier series is presented to express the asymmetrical deformation of the tunnel cross section. Five basic deformation modes corresponding to the expansion order 2 are a complete deformation mode to reflect deformation behaviors of the tunnel cross section under slope boundary. Such this complete displacement mode is implemented into the complex variable solution for analytically predicting tunneling-induced ground deformation under slope boundary. All of these analytical solutions are verified by good agreements of the comparison between the analytical solutions and finite element method results. A parameter study is carried out to investigate the influence of deformation modes of the tunnel cross section, geometrical conditions of the tunnel and the slope angle, and “Buoyancy effect” on the displacement field. Finally, the proposed method is consistent with measured data of the Hejie tunnel in China qualitatively. The presented solution can provide a simplified indication for evaluating the ground deformation under slope condition of ground surface.  相似文献   

Efficient DEM‐based overland flow routing using integrated recursive algorithms          下载免费PDF全文

Pin‐Chun Huang  Kwan Tun Lee 《水文研究》2017,31(5):1007-1017

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.  相似文献