考虑几何非线性的强夯流固动力耦合分析     

谢能刚  宋修广  王璐 《水文地质工程地质》2003,30(5):44-48

针对强夯法加固地基机理的流固动力耦合分析问题,本文考虑土体的几何非线性,建立土体非线性动力平衡方程和整体流固动力耦合方程,给出土体非线性动力平衡方程的迭代计算格式和流固动力耦合方程的解耦计算方法,并对一具体算例进行了数值分析,得到了地基位移、应力等在强夯作用下的变化规律和在空间上的分布特征,为精确模拟分析强夯加固机理提供了有效途径。  相似文献   

The role of sediment specific gravity and availability on cluster evolution     

A. N. Papanicolaou  K. Strom  A. Schuyler  N. Talebbeydokhti 《地球表面变化过程与地形》2003,28(1):69-86

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds     

Heather M. Savage  Michele L. Cooke 《Journal of Structural Geology》2003,25(12):2023-2034

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.  相似文献   

用雷达观测资料改进MM5初始场的初步试验研究   总被引：16，自引：0，他引：16  

托亚  梁海河  马淑芬  朱福康 《南京气象学院学报》2003,26(5):661-667

采用同时调整热力学和动力学变量，并考虑湿度与温度的变化相协调的初始化方法，引进雷达资料改善MM5模式的初始场。试验结果表明：经过优化处理的初始场，显著提高了模式对降水特别是甚短时(0～6h)降水的落区和量的预报准确率。其中调整热力学变量对改进降水落区预报比动力学变量的调整更为重要。  相似文献   

天山北坡牧草生长季节土壤水分变化特征探讨   总被引：1，自引：0，他引：1  

钟庆  梁云  吕斌  崔玉玲  梁晓辉 《沙漠与绿洲气象(新疆气象)》2003,26(3):18-19

通过对牧业气象试验站多年土壤水分观测资料的整理分析，认为夏季土壤水分比较丰富，其随深度分布呈降水型；春季土壤水分含量最少，秋季次之，其随深度分布呈蒸发、降水型。旬土壤水分含量在牧草生长期呈两峰三谷型。  相似文献   

2001年7月27日临汾区域性暴雨天气过程分析          下载免费PDF全文

戴有学  史海平  张临平  孙悦  赵晓丽 《山西气象》2003,(2):4-6

本文应用数值预报产品，常规天气图，卫星云图及大气探测等资料，对2001年7月27日临汾区域性暴雨天气过程产生的环流形势，水汽和热力条件及动力机制进行了分析和研究，进一步揭示临汾市暴雨发生的环境流场和物理量场的特征。  相似文献   

一个有限区变网格模式的设计   总被引：1，自引：0，他引：1       下载免费PDF全文

钱滔滔  郭肖容  廖洞贤 《大气科学》1997,21(6):687-697

在国家气象中心业务运行的有限区球面均匀网格模式的基础上设计了一个有限区变网格模式。使预报的窗口区设计为均匀细网格0.5°，而窗口区以外则以0.1°经纬度均匀向外递增。采用廖洞贤1995年提出的坐标变换方法，变网格中的模式方程可以在相应的均匀网格上进行计算。利用实际资料对绝热模式进行了变网格与全场均匀细网格0.5°的对比试验。3个个例的试验结果表明:对窗口区变网格模式预报几乎与全场均匀细网格模式预报水平相当。但由于窗口区外网格点数减少而所用计算机时（CPU）节省了一半以上。  相似文献   

一个全球变网格多层原始方程差分模式的设计   总被引：1，自引：1，他引：1       下载免费PDF全文

廖洞贤 《应用气象学报》1997,8(1):1-10

文章设计了一个以均匀网格差分模式为基础的全球变网格多层原始方程差分模式。还证明了如果前者满足了一定条件，从而具有质量与能量守恒性质以及与连续情况一致的动能、位能和表面位能之间的转换关系，则变网格模式也同样具有。而且，把前者改变为后者增加的运算量很小，也非常方便。  相似文献   

分形几何用于岩石损伤扩展过程的研究   总被引：3，自引：2，他引：3  

周金枝  徐小荷 《岩土力学》1997,18(4):36-40

通过对岩石损伤扩展机理的研究，运用分形几何理论，建立了岩石损伤变量ω与分形维数之间关系。  相似文献   

Curvature analysis of triangulated surfaces in structural geology   总被引：6，自引：0，他引：6  

Philippe Samson  Jean-Laurent Mallet 《Mathematical Geology》1997,29(3):391-412

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.  相似文献