基于新型单相MICP技术改性黏性土力学特性的试验研究     

张宽  唐朝生  刘博  张天生  程青  施斌 《工程地质学报》2020,28(2):306-316

微生物诱导碳酸钙沉积(MICP)是一种绿色低碳的新型土体改性技术.该技术当前主要适用于渗透性较好的砂土,普遍使用两相处理方法,即菌液和胶结液分开施用.然而,对于渗透性相对较差的黏性土,传统的两相处理方法难以适用.为此,引入新的单相胶结方法,即菌液和胶结液混合施用,通过调节溶液的初始pH值为细菌水解作用提供窗口期,避免微生物絮凝阻塞孔隙,使混合液均匀分布于土体一定深度范围内,从而达到显著提升胶结效果的目的.利用喷洒法将混合液喷洒至土体表层进行MICP处理,处理完成后使用超微型贯入仪SMP-1测试土体表层不同深度处的结构强度,分析土体力学特性的空间差异,对土体的胶结效果进行定量评价.此外,探究了胶结液浓度(0.2M、0.5M和1.0M)及胶结方法(调节pH与否)对于土体结构强度及MICP改性效果的影响.结果表明:采用单相MICP技术对黏性土进行改性,能够显著提高其结构强度,具有较好的适用性;在不高于1.0 M的胶结液浓度范围内,黏性土的胶结效果随着胶结液浓度增加而提升;相比较而言,调节pH的单相胶结方法对于提升土体胶结的深度和均匀性有明显积极作用.新型单相MICP技术简单易行,能够节约成本,在黏性土表层加固方面具有潜在推广应用价值.  相似文献   

某地下空间承压含水层抽水试验及成果分析     

吴烨  谢世红 《四川地质学报》2020,40(1):107-111

由于地下水突涌风险,地下空间在施工作业中有必要通过抽水试验确定承压含水层的水文地质参数。依据勘察报告的初步评价,基坑开挖15.5m时,场地内第⑦1层承压含水层有可能产生突涌,为确保工程安全施工,需开挖前进行承压含水层抽水试验,取得场地承压含水层水文地质参数及降水引起的沉降特征,为地下空间设计和施工提供可靠依据。本次布设抽水井、观测井、分层沉降标组、孔隙水压力观测孔及地面沉降观测点,依据抽水试验技术要求获取渗透系数、抽水影响半径等相关水文地质参数。最后,针对工程场地内承压水情况及特点进行分析,提出基坑开挖时的承压水降压建议方案。  相似文献   

高压旋喷桩单桩承载力分析     

王勃  行小盈 《岩土工程技术》2020,(1):48-52

高压喷射注浆于1968年首创于日本。我国于20世纪70年代初相继引进并开始研究高压喷射注浆技术。目前,高压旋喷工艺应用最为广泛,工艺技术最为成熟。对旋喷桩成桩质量及单桩承载力进行研究分析,为旋喷桩在地基与基础工程、水利水电工程、止水、加固工程中的应用提供设计参考依据。该试验在陕西省延安市某建成小区内选三个试验点,按不同旋喷桩施工工艺成桩,通过对桩身完整性检测、单桩承载力试验,分析旋喷桩成桩质量及单桩承载力。  相似文献   

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections     

Ching-Yi Tsai  Keh-Chyuan Tsai  Chao-Hsien Li  Chung-Che Wu  Ker-Chun Lin  Sheng-Jhih Jhuang 《地震工程与结构动力学》2020,49(13):1344-1362

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.  相似文献   

Response of a scale-model pile group for a jacket foundation of an offshore wind turbine in liquefiable ground during shaking table tests     

Yung-Yen Ko  Yi-Ting Li 《地震工程与结构动力学》2020,49(15):1682-1701

To investigate the seismic response of a pile group during liquefaction, shaking table tests on a 1/25 scale model of a 2 × 2 pile group were conducted, which were pilot tests of a test project of a scale-model offshore wind turbine with jacket foundation. A large laminar shear box was utilized as the soil container to prepare a liquefiable sandy ground specimen. The pile group model comprising four slender aluminum piles with their pile heads connected by a rigid frame was designed with similitude considerations focusing on soil–pile interaction. The input motions were 2-Hz sinusoids with various acceleration amplitudes. The excess pore water pressure generation indicated that the upper half of the ground specimen reached initial liquefaction under the 50-gal-amplitude excitation, whereas in the 75-gal-amplitude test, almost entire ground was liquefied. Accelerations in soil, on the movable frames composing the laminar boundary of the shear box, and along the pile showed limited difference at the same elevation before liquefaction. After liquefaction, the soil and the movable-frame accelerations that represented the ground response considerably reduced, whereas both the movable frames and the piles exhibited high-frequency jitters other than 2-Hz sinusoid, and meantime, remarkable phase difference between the responses of the pile group and the ground was observed, all probably due to the substantial degradation of liquefied soil. Axial strains along the pile implied its double-curvature bending behavior, and the accordingly calculated moment declined significantly after liquefaction. These observations demonstrated the interaction between soil and piles during liquefaction.  相似文献   

Seismic ground-roll noise attenuation using deep learning     

Harpreet Kaur  Sergey Fomel  Nam Pham 《Geophysical Prospecting》2020,68(7):2064-2077

We propose to adopt a deep learning based framework using generative adversarial networks for ground-roll attenuation in land seismic data. Accounting for the non-stationary properties of seismic data and the associated ground-roll noise, we create training labels using local time–frequency transform and regularized non-stationary regression. The basic idea is to train the network using a few shot gathers such that the network can learn the weights associated with noise attenuation for the training shot gathers. We then apply the learned weights to test ground-roll attenuation on shot gathers, that are not a part of training input to obtain the desired signal. This approach gives results similar to local time–frequency transform and regularized non-stationary regression but at a significantly reduced computational cost. The proposed approach automates the ground-roll attenuation process without requiring any manual input in picking the parameters for each shot gather other than in the training data. Tests on field-data examples verify the effectiveness of the proposed approach.  相似文献   

隔震曲线梁桥不同等级地震的振动特性模拟分析          下载免费PDF全文

高菁阳 《地震工程学报》2020,42(3):607-612

曲线桥梁抗震特性模拟分析对于曲线桥梁隔震、减震有着重要意义。基于隔震曲线桥梁设计过程中的特点,通过非线性水平弹簧单元对铅芯橡胶支座双向非线性的能力进行模拟,根据SAP2000科学选择强震观测地震波,并考量曲线桥梁本身存在的特性对桥梁振动特性产生的影响,针对隔震曲线桥梁在不同等级地震下振动特征进行模拟分析,其中,通过隔震曲线桥梁铅芯橡胶支座模型的构建和梁桥不同等级地震计算模型、输入地震波与传感器量测等步骤得到的模拟结果为:不同地震波与加速度峰值输入过程中,地震动较小下的支座水平刚度比较大,且结构相对稳定;地震幅值增大时,桥梁支座水平刚度减小,且支座的恢复力位移滞回变化曲线面积比较大,能够更多地将地震输入能量消散掉,减小能量不断向曲线桥梁上方传递的速度,可有效减轻地震反应,起到隔震的效果。  相似文献   

Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment     

Liangjie Qi  Keiichiro Kunitomo  Masahiro Kurata  Yoshiki Ikeda 《地震工程与结构动力学》2020,49(8):772-793

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.  相似文献   

非饱和土中剪切S波的传播特性分析          下载免费PDF全文

柳鸿博  周凤玺 《地震工程学报》2020,42(4):960-966

基于对非饱和多孔介质的研究成果,考虑孔隙中的液相和气相的相互影响,研究非饱和土地基中剪切S波的传播特性。通过非饱和土中固相、液相和气相的质量平衡方程、动量平衡方程和非饱和土有效应力原理,建立问题的弹性波动方程,经过理论推导给出非饱和土中剪切S波的弥散特征方程。通过数值算例分析剪切S波的波速和衰减系数随饱和度、频率和固有渗透系数等因素的变化规律。结果表明,剪切S波的波速几乎不受饱和度的影响,但其随着频率的增大而减小,随着固有渗透系数的增大先不变后增大;剪切S波的衰减系数随着饱和度和频率的增加均增大,而随着固有渗透系数的增大先不变后增大最后减小。  相似文献   

高地应力V级围岩相似材料研制及岩体开挖卸载模型试验分析          下载免费PDF全文

方智淳  朱正国  王仁远  刘柳 《地震工程学报》2020,42(2):505-511

以黄土、砂为骨料,石膏、水泥为胶结材料,水为调节剂,以正交试验方法配制出V级围岩相似材料,该材料能够很好的模拟隧道Ⅴ级软弱围岩。在此基础上,以钢筒模型试验为媒介,通过千斤顶配合反力架加载,观察不同材料配比下的试验组应力变化斜率、自稳时间、应变大小等方面的差异,结合加载完成后模型开口处岩体变化情况,探索高地应力下Ⅴ级围岩开挖卸载效应。试验结果表明:虽然相似材料会因配比不同改变物理力学性质,但主要是对弹性模量的影响较大;在增大垂直压力作用下,试验中材料自稳时间变长,应力释放也较为彻底,但整体趋势放缓。  相似文献