Geoscientific R&D for high level radioactive waste disposal in Sweden — current status and future plans     

Lars O. Ericsson   《Engineering Geology》1999,52(3-4):305-317

SKB (Svensk Kärnbränslehantering AB) is responsible for all handling, transport and storage of the nuclear wastes outside the Swedish nuclear power stations. According to Swedish law, SKB is responsible for an R&D-programme needed to take care of the radwastes. The programme comprises, among others, a general supportive geo-scientific R&D and the Äspö Hard Rock Laboratory (HRL) for more in-situ specific tasks.

Sweden is geologically located in the Fennoscandian shield which is dominated by gneisses and granitoids of Precambrian age. The Swedish reference repository concept thus considers an excavated vault at ca. 500 m depth in crystalline rocks. In this concept (KBS-3), copper canisters with high level waste will be emplaced in deposition holes from a system of tunnels. Blocks of highly compacted swelling bentonite clay are placed in the holes leaving ample space for the canisters. At the final closure of the repository, the galleries are backfilled with a mixture of sand and bentonite. This repository design aims to make the disposal system as redundant as possible. Although the KBS-3 concept is the reference concept, alternative concepts and/or repository lay-outs are also studied. The main alternative, currently under development at SKB, is disposal in boreholes with depths of 4–5 km. The geoscientific research will to a great extent be guided by the demands posed by the performance and safety assessments, as well as the constuctability issues. Some main functions of the geological barrier are fundamental for the long-term safety of a repository. These are: bedrock mechanical stability, a chemically stable environment as well as a slow and stable groundwater flux. The main time-table for the final disposal of long-lived radioactive waste in Sweden foresees the final selection of the disposal system and site during the beginning of next decade.  相似文献   

庆康灵6号药物对中国对虾免疫力的作用     

李春猛  战文斌 《海洋湖沼通报》1999,(3):41-45

养殖的中国对虾用尖加０．３％主康灵６号的０实验饲料进行了１８天投喂,在停止投喂实验饲料后的第２、８、１３天分别测定了对虾血淋巴淋巴、血浆的抗菌活力和血细胞溶解物的酚氧化酶活力。  相似文献   

延安地区上三叠统长6期沉积特征及其演化   总被引：1，自引：0，他引：1  

王震  吴汉宁  李英  王靖华  柏冠军  赵希刚 《煤田地质与勘探》2005,33(6):17-20

通过对川口油田测井曲线和岩心分析,总结了延安地区上三叠统长6期沉积微相特征,建立了长6期岩性和测井曲线的响应模式。再结合分析沉积的演化过程、电性和物性特征、骨架砂体的几何形态和沉积演变,得出该地区沉积相和演化模式。认为从长6₄到长6₁期沉积环境为湖泊、三角洲前缘、三角洲平原亚相到河流相。长6₁、长6₂是主力储层,其物性最好。   相似文献   

A NEW FINDING OF SURFACE RUPTURE ZONES ASSOCIATED WITH THE 1936 LINGSHAN M6(3/4) EARTHQUAKE,GUANGXI, CHINA          下载免费PDF全文

LI Xi-guang  LI Bing-su  PAN Li-li  NIE Guan-jun  WU Jiao-bing  LU Jun-hong  YAN Xiao-min  LI Zhi-yong 《地震地质》2017,39(4):689-698

On April 1, 1936, an M6(3/4) earthquake occurred on the Fangcheng-lingshan Fault. This event is the biggest historical earthquake on the coastal seismic zone, South China ever. But so far, no any findings about the surface rupture of this event have been reported. This paper is the first to find several intact surface rupture zones associated with the 1936 Lingshan seismic event, in the areas of Gaotang, Jiaogengping etc. on the northeast segment of the Fangcheng-Lingshan Fault. According to the field work, the surface rupture stretches to 10km and distributes along NE direction in front of Luoyang Mountain, represented by earthquake scarp, extensional fracture, dextrally faulted gully and river system etc. The characteristics of surface ruptures and faulted landforms indicate that the surface rupture is of normal-dextral strike slip faulting. The trenching on this fault exposed that at least three seismic events have been recorded, including two historical earthquake events and the latest one is the 1936 Lingshan M6(3/4) earthquake. These surface rupture zones are the key to the detection of seismogenic structure and the re-estimate of magnitude of this event. The new finding of these surface rupture zones would be particularly significant for the detection of the seismogenic structure of Lingshan M6(3/4) earthquake.  相似文献   

An evaluation of the Arctic clouds and surface radiative fluxes in CMIP6 models     

Jianfen Wei  Zhaomin Wang  Mingyi Gu  Jing-Jia Luo  Yunhe Wang 《海洋学报(英文版)》2021,40(1):85-102

To assess the performances of state-of-the-art global climate models on simulating the Arctic clouds and surface radiation balance, the 2001–2014 Arctic Basin surface radiation budget, clouds, and the cloud radiative effects(CREs) in 22 coupled model intercomparison project 6(CMIP6) models are evaluated against satellite observations. For the results from CMIP6 multi-model mean, cloud fraction(CF) peaks in autumn and is lowest in winter and spring, consistent with that from three satellite observation products(Cloud Sat-CALIPSO, CERESMODIS, and APP-x). Simulated CF also shows consistent spatial patterns with those in observations. However,almost all models overestimate the CF amount throughout the year when compared to CERES-MODIS and APP-x.On average, clouds warm the surface of the Arctic Basin mainly via the longwave(LW) radiation cloud warming effect in winter. Simulated surface energy loss of LW is less than that in CERES-EBAF observation, while the net surface shortwave(SW) flux is underestimated. The biases may result from the stronger cloud LW warming effect and SW cooling effect from the overestimated CF by the models. These two biases compensate each other,yielding similar net surface radiation flux between model output(3.0 W/m~2) and CERES-EBAF observation(6.1 W/m~2). During 2001–2014, significant increasing trend of spring CF is found in the multi-model mean,consistent with previous studies based on surface and satellite observations. Although most of the 22 CMIP6 models show common seasonal cycles of CF and liquid water path/ice water path(LWP/IWP), large inter-model spreads exist in the amounts of CF and LWP/IWP throughout the year, indicating the influences of different cloud parameterization schemes used in different models. Cloud Feedback Model Intercomparison Project(CFMIP)observation simulator package(COSP) is a great tool to accurately assess the performance of climate models on simulating clouds. More intuitive and credible evaluation results can be obtained based on the COSP model output. In the future, with the release of more COSP output of CMIP6 models, it is expected that those inter-model spreads and the model-observation biases can be substantially reduced. Longer term active satellite observations are also necessary to evaluate models' cloud simulations and to further explore the role of clouds in the rapid Arctic climate changes.  相似文献   

全球温升1.5℃和2.0℃情景下中国降雨诱发地质灾害危险性和人口暴露度评估研究     

林齐根  王磊斌  张家慧 《地球信息科学学报》2023,25(1):177-189

气候变化情景下极端降水事件的频次和强度预估呈增加趋势,这会导致全球部分地区极端降雨诱发地质灾害风险的增加。本文基于中国降雨诱发地质灾害易发性模型和不同地貌分区的累积事件降雨量-降雨历时阈值曲线,采用最新的CMIP6全球气候模式多模式集合结果,基于全球温升目标情景的视角,从地质灾害空间易发性和发生频次两方面,探讨温升情景下中国地质灾害危险性的可能变化及其对暴露人口的潜在影响。结果表明,CMIP6多模式集合预估的多年平均降水在温升1.5℃和2.0℃情景下相比基准时期可能增加5.4%～9.5%,导致中等至极高地质灾害易发区范围预估增加0.33%～0.74%,由于预估的极端降水事件增加,地质灾害发生频次预估增加7.0%～11.2%,进一步综合未来人口空间分布,潜在地质灾害暴露人口可能增加6.20亿人次（18.90%）和4.26亿人次（12.97%）。各地貌分区未来情景下地质灾害危险性预估增加且存在显著的空间异质性,温升2.0℃情景下中等至极高易发性范围相比基准时期增加0.71%～1.28%,地质灾害发生频次预估增加1.2%～15.6%,其中,青藏高原区地质灾害危险性增加最明显。综合考虑未来人口...  相似文献   

Sorption and Chemical Reactions of PAHs with Dissolved Humic Substances and Related Model Polymers     

Frank‐Dieter Kopinke  Anett Georgi  Katrin Mackenzie 《洁净——土壤、空气、水》2001,28(7):385-399

Sorption coefficients measured for PAHs on dissolved humic substances by SPME and FQT were found to be inevitably different and method‐dependent – SPME provides activity‐based and FQT concentration‐based sorption coefficients. Poly(acrylic acid) esters as well‐defined model polymers were used in sorption experiments, leading to the conclusion that short aliphatic chains are more effective in binding PAHs than aromatic moieties. FQT was inappropriate to measure sorption coefficients for the interaction of pyrene with poly(acrylic acid) esters but the experiments revealed a characteristic shift in the fluorescence spectrum. Using pyrene as a probe for the molecular environment in the sorbed state, the observed spectral shift indicated a highly hydrophobic microenvironment. The empirical relationships between lg K_DOC and lg K_OW were generalized on the basis of a modified Flory‐Huggins concept. Introducing only one sorbent‐specific parameter, the solubility parameter δ_DOM, the calculation of sorption coefficients became possible for a wide range of HOCs using fundamental data readily available from the literature. Long‐term experiments showed that reactive PAHs (such as acenaphthylene and 9‐methylanthracene) are able to react with HAs under strictly abiotic and anoxic conditions, whereas less reactive PAHs (such as naphthalene and dihydroanthracene) do not form bound residues. The HA reveals two functions in the interaction, behaving as a reaction partner and as a protecting ligand.  相似文献   

Ice fracturing during jökulhlaups: implications for englacial floodwater routing and outlet development     

Matthew J. Roberts  Andrew J. Russell  Fiona S. Tweed   skar Knudsen 《地球表面变化过程与地形》2000,25(13):1429-1446

Theoretical studies of glacial outburst floods (jökulhlaups) assume that: (i) intraglacial floodwater is transported efficiently in isolated conduits; (ii) intraglacial conduit enlargement operates proportionally to increasing discharge; (iii) floodwater exits glaciers through pre‐existing ice‐marginal outlets; and (iv) the morphology and positioning of outlets remains fixed during flooding. Direct field observations, together with historical jökulhlaup accounts, confirm that these theoretical assumptions are not always correct. This paper presents new evidence for spatial and temporal changes in intraglacial floodwater routing during jökulhlaups; secondly, it identifies and explains the mechanisms controlling the position and morphology of supraglacial jökulhlaup outlets; and finally, it presents a conceptual model of the controls on supraglacial outbursts. Field observations are presented from two Icelandic glaciers, Skeiðarárjökull and Sólheimajökull. Video footage and aerial photographs, taken before, during and after the Skeiðarárjökull jökulhlaup and immediately after the Sólheimajökull jökulhlaup, reveal changes in floodwater routing and the positioning and morphology of outlets. Field observations confirm that glaciers cannot transmit floodwater as efficiently as previously assumed. Rapid increases in jökulhlaup discharge generate basal hydraulic pressures in excess of ice overburden. Under these circumstances, floodwater can be forced through the surface of glaciers, leading to the development of a range of supraglacial outlets. The rate of increase in hydraulic pressure strongly influences the type of supraglacial outlet that can develop. Steady increases in basal hydraulic pressure can retro‐feed pre‐existing englacial drainage, whereas transient increases in pressure can generate hydraulic fracturing. The position and morphology of supraglacial outlets provide important controls on the spatial and temporal impact of flooding. The development of supraglacial jökulhlaup outlets provides a new mechanism for rapid englacial debris entrainment. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

Die neue EG‐Wasserrahmenrichtlinie: Bewertung der chemischen und ökologischen Qualität von Oberflächengewässern     

U. Irmer 《洁净——土壤、空气、水》2000,28(1):7-14

The New EC Framework Water Directive: Assessment of the Chemical and Ecological Status of Surface Waters The main objective of the draft EC Framework Water Directive is the good quality of all surface waters. The directive provides for an assessment of the chemical status of surface waters (EU‐wide valid environmental quality standards for approximately 30 priority substances) and a five‐stage ecological classification of waters, comprising the stages high, good, moderate, poor, and bad. The starting point for the assessment are the reference conditions, which are defined as corresponding to high water quality and characterising a water status with no significant anthropogenic impact. The reference sites in the various water body types are to be selected using hydromorphological and physico‐chemical parameters and subsequently characterised by means of biological parameters. For surface waters, three groups of characteristics are provided for, namely: 1. with priority the biology – in the case of surface waters – with the four elements phytoplankton, macrophytes/phytobenthos, benthic invertebrate fauna, and fish fauna; 2. supporting the hydromorphology, e.g. flowing waters with the three elements hydrological regime, river continuity, and morphological conditions and 3. supporting the physico‐chemical conditions with the three elements general conditions, specific synthetic pollutants, and specific non synthetic pollutants (other than the priority substances of the chemical status).  相似文献   

Characterization of Estuarine and Fluvial Dissolved Organic Matter by Thermochemolysis using Tetramethylammonium Hydroxide     

J. D. H. van Heemst  J. C. del Rio  P. G. Hatcher  J. W. de Leeuw 《洁净——土壤、空气、水》2000,28(2):69-76

Selected samples of dissolved organic matter (DOM) isolated by ultrafiltration (UDOM) have been analyzed by thermochemolysis in the presence of tetramethylammonium hydroxide (TMAH). This technique cleaves ester and ether bonds of bio‐ and geological macromolecules and releases monomer subunits and methylates them in situ as their methyl ethers and methyl esters. Compared with conventional pyrolysis, TMAH thermochemolysis avoids decarboxylation of preexisting carboxylic moieties and produces aromatic acids as their methyl esters. Various phenolic derivatives, which might originate from incorporated lignin‐derived structures, from the highly aliphatic and resistant biopolymer cutan and also from proteinaceous materials, were identified among the products produced from UDOM upon thermochemolysis. The presence of lignin derivatives in UDOM indicates input of organic matter derived from terrestrial sources. Various aromatic acids, perhaps representing the final steps in the oxidation of the side‐chain during microbial oxidation of lignin, were released upon TMAH thermochemolysis, suggesting they are structural constituents of the UDOM. Different ratios of lignin‐derived materials, commonly determined using the CuO oxidation method, such as the Δ value, indicative of the amount of lignin present, the acid/aldehyde ratio (Ad/Al)_G, indicative of the extent of oxidative degradation of the lignin component, and the syringyl/guaiacyl (S/G) and p‐hydroxyphenyl/guaiacyl (P/G) ratios, indicative of the contribution for the different types of lignin, were determined.  相似文献