An adaptive capacity spectrum method for assessment of bridges subjected to earthquake action     

Chiara Casarotti  Rui Pinho 《Bulletin of Earthquake Engineering》2007,5(3):377-390

Estimating seismic demands on structures, to predict their performance level with confidence, requires explicit consideration of the structural inelastic behaviour: to this end, the use of nonlinear static procedures is inevitably going to be favoured over complex nonlinear time-history methods. The currently available assessment procedures have been tested predominantly against building frames. A newly derived assessment procedure is proposed within the scope of bridge applications, based on an innovative displacement-based adaptive pushover technique. The procedure, which can be incorporated into a performance-based engineering philosophy, is applicable to MDOF continuous span bridges with flexible or rigid superstructures, and for varying degrees of abutment restraint. As a first application to determine the viability of the proposed procedure, a parametric study is conducted on a ensemble of bridges subjected to earthquake motion. It is shown that, compared to the seismic demand estimated by means of the more accurate nonlinear dynamic analysis tool, the novel static assessment method can lead to the attainment of satisfactory predictions, both in terms of displacement as well as moment demand on members.  相似文献   

The numerical solution of the Advection-Dispersion Equation: A review of some basic principles     

Steve Wallis 《Acta Geophysica》2007,55(1):85-94

The simulation of solute transport in rivers is frequently based on numerical models of the Advection-Dispersion Equation. The construction of reliable computational schemes, however, is not necessarily easy. The paper reviews some of the most important issues in this regard, taking the finite volume method as the basis of the simulation, and compares the performance of several types of scheme for a simple case of the transport of a patch of solute along a uniform river. The results illustrate some typical (and well known) deficiencies of explicit schemes and compare the contrasting performance of implicit and semi-Lagrangian versions of the same schemes. It is concluded that the latter have several benefits over the other types of scheme.  相似文献   

Stability and accuracy analysis of outer loop dynamics in real‐time pseudodynamic testing of SDOF systems     

Oya Mercan  James M. Ricles 《地震工程与结构动力学》2007,36(11):1523-1543

Real‐time pseudodynamic (PSD) testing is an experimental technique for evaluating the dynamic behaviour of a complex structure. During the test, when the targeted command displacements are not achieved by the test structure, or a delay in the measured restoring forces from the test structure exists, the reliability of the testing method is impaired. The stability and accuracy of real‐time PSD testing in the presence of amplitude error and a time delay in the restoring force is presented. Systems consisting of an elastic single degree of freedom (SDOF) structure with load‐rate independent and dependent restoring forces are considered. Bode plots are used to assess the effects of amplitude error and a time delay on the steady‐state accuracy of the system. A method called the pseudodelay technique is used to derive the exact solution to the delay differential equation for the critical time delay that causes instability of the system. The solution is expressed in terms of the test structure parameters (mass, damping, stiffness). An error in the restoring force amplitude is shown to degrade the accuracy of a real‐time PSD test but not destabilize the system, while a time delay can lead to instability. Example calculations are performed for determining the critical time delay, and numerical simulations with both a constant delay and variable delay in the restoring force are shown to agree well with the stability limit for the system based on the critical time delay solution. The simulation models are also used to investigate the effects of a time delay in the PSD test of an inelastic SDOF system. The effect of energy dissipation in an inelastic structure increases the limit for the critical time delay, due to the energy removed from the system by the energy dissipation. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Impedance of flexible suction caissons     

Morten Liingaard  Lars Andersen  Lars Bo Ibsen 《地震工程与结构动力学》2007,36(14):2249-2271

The dynamic response of offshore wind turbines is affected by the properties of the foundation and the subsoil. The aim of this paper is to evaluate the dynamic soil–structure interaction of suction caissons for offshore wind turbines. The investigations include evaluation of the vertical and coupled sliding–rocking vibrations, influence of the foundation geometry and examination on the properties of the surrounding soil. The soil is simplified as a homogenous linear viscoelastic material and the dynamic stiffness of the suction caisson is expressed in terms of dimensionless frequency‐dependent coefficients corresponding to different degrees of freedom. The dynamic stiffness coefficients for the skirted foundation are evaluated using a three‐dimensional coupled boundary element/finite element model. Comparisons with known analytical and numerical solutions indicate that the static and dynamic behaviours of the foundation are predicted accurately using the applied model. The analysis has been carried out for different combinations of the skirt length, Poisson's ratio of the subsoil and the ratio of the soil stiffness to the skirt stiffness. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

某长江大桥深度超过15米的砂土层液化势的综合评价     

刘建达  陈国兴  刘雪珠  王炳辉 《地震工程与工程振动》2007,27(5):151-159

不同抗震设计规范的砂土液化判别方法或国内外其他有代表性的液化判别方法所采用的地震动参数和土性指标及其埋藏条件是不同的,因而采用这些方法对同一工程场地进行液化势预测时其评价结果通常有一些差异,甚至会得到相反的结论。为了给重大工程建设提供较为合理、可信的地基液化势预测结果,采用多种液化判别方法进行场地液化势的综合评价是比较客观的,也是必要的。本文结合某长江大桥桥基工程,采用建筑抗震设计规范的砂土液化判别方法、国内外有代表性的液化判别方法、有限元数值分析法等多种方法逐一对该工程场地砂性土层进行液化判别,并结合室内动三轴液化试验结果,对主桥墩不考虑冲刷条件和考虑一般冲刷深度5m条件时的砂性土层进行了液化势的综合评价,并将各土层的液化势分为液化、可能液化和不液化3个等级,得到了较为合理可靠的判别结果。  相似文献   

Mapping and initial dilution estimation of an ocean outfall plume using an autonomous underwater vehicle     

P.A. Ramos  M.V. Neves  F.L. Pereira 《Continental Shelf Research》2007

A monitoring mission to study the shape and estimate initial dilution of the S. Jacinto outfall plume using an autonomous underwater vehicle (AUV) was performed on July 30, 2002. In order to reduce the uncertainty about plume location and to concentrate the vehicle mission only in the hydrodynamic mixing zone, outputs of a near-field prediction model, based on effective real-time in situ measurements of current speed and direction and density stratification, were opportunistically used to specify in real time the mission transects. The surface characteristics of the outfall plume were found to be influenced strongly by the relatively weak stratification and low current velocities. Dilution was estimated using a temperature–salinity (TS-) diagram with initial mixing lines between wastewater and ambient waters. Effluent dilutions were at least 30:1 in this study. In order to efficiently map the plume dispersion we applied the least-squares collocation method technique. Our results demonstrate that AUVs can provide high-quality measurements of physical properties of effluent plumes in a quite effective manner and valuable considerations about the initial mixing processes under real oceanic conditions can be further investigated.  相似文献   

Comments on “Steady- and transient-state inversion in hydrogeology by successive flux estimation” by P. Pasquier and D. Marcotte     

Giansilvio Ponzini  Mauro GiudiciChiara Vassena 《Advances in water resources》2007

Pasquier and Marcotte [Pasquier P, Marcotte D. Steady- and transient-state inversion in hydrogeology by successive flux estimation. Adv Wat Res 2006;29:1934–52] propose some modifications to the Comparison Model Method (CMM), in order to apply it to transient 3D ground water flow data for conductivity identification. We present some remarks on that paper to improve the comprehension of the basic features of the CMM and of the real value of the novelties introduced by Pasquier and Marcotte.  相似文献   

Seismic,petrologic, and geodetic analyses of the 1999 dome-forming eruption of Guagua Pichincha volcano,Ecuador     

Alexander Garcia-Aristizabal  Hiroyuki Kumagai  Pablo Samaniego  Patricia Mothes  Hugo Yepes  Michel Monzier 《Journal of Volcanology and Geothermal Research》2007

Guagua Pichincha, located 14 km west of Quito, Ecuador, is a stratovolcano bisected by a horseshoe-shaped caldera. In 1999, after some months of phreatic activity, Guagua Pichincha entered into an eruptive period characterized by the extrusion of several dacitic domes, vulcanian eruptions, and pyroclastic flows. We estimated the three-dimensional (3-D) P-wave velocity structure beneath Guagua Pichincha using a tomographic inversion method based on finite-difference calculations of first-arrival times. Hypocenters of volcano-tectonic (VT) earthquakes and long-period (LP) events were relocated using the 3-D P-wave velocity model. A low-velocity anomaly exists beneath the caldera and may represent an active volcanic conduit. Petrologic analysis of eruptive products indicates a magma storage region beneath the caldera, having a vertical extent of 7–8 km with the upper boundary at about sea level. This zone coincides with the source region of deeper VT earthquakes, indicating that a primary magma body exists in this region. LP swarms occurred in a cyclic pattern synchronous with ground deformation during magma extrusions. The correlation between seismicity and ground deformation suggests that both respond to pressure changes caused by the cyclic eruptive behavior of lava domes.  相似文献   

Shear waves at a corrugated interface between anisotropic elastic and visco-elastic solid half-spaces     

S. K. Tomar  Jatinder Kaur 《Journal of Seismology》2007,11(3):235-258

Rayleigh’s method of approximation is employed to find out the reflection and transmission coefficients due to an incident plane SH wave at a corrugated interface between a laterally and vertically inhomogeneous anisotropic elastic solid half-space and a laterally and vertically inhomogeneous isotropic visco-elastic solid half-space. The lateral and vertical inhomogeneities are described by the exponential variations of elastic parameters. The formulae of reflection and transmission coefficients are derived in closed form for the first-order approximation of the corrugation. The effects of the corrugation of the interface, the inhomogeneity, the anisotropy, the visco-elasticity and the frequency of the incident wave on these coefficients are studied analytically and numerically for a specific model containing a periodic interface. The results of earlier workers have been reduced as particular cases from the present formulation.  相似文献   

A Least-squares Window Curves Method for Interpretation of Magnetic Anomalies Caused by Dipping Dikes   总被引：1，自引：0，他引：1  

E. M. Abdelrahman  E. R. Abo-Ezz  K. S. Soliman  T. M. El-Araby  K. S. Essa 《Pure and Applied Geophysics》2007,164(5):1027-1044

We have developed a least-squares method to determine simultaneously the depth and the width of a buried thick dipping dike from residualized magnetic data using filters of successive window lengths. The method involves using a relationship between the depth and the half-width of the source and a combination of windowed observations. The relationship represents a family of curves (window curves). For a fixed window length, the depth is determined for each half-width value by solving one nonlinear equation of the form f (z) = 0 using the least-squares method. The computed depths are plotted against the width values representing a continuous curve. The solution for the depth and the width of the buried dike is read at the common intersection of the window curves. The method involves using a dike model convolved with the same moving average filter as applied to the observed data. As a result, this method can be applied to residuals as well as to measured magnetic data. Procedures are also formulated to estimate the amplitude coefficient and the index parameter. The method is applied to theoretical data with and without random errors. The validity of the method is tested on airborne magnetic data from Canada and on a vertical component magnetic anomaly from Turkey. In all cases examined, the model parameters obtained are in good agreement with the actual ones and with those given in the published literature.  相似文献