Ships with ventilated cavitation in seaways and active flow control     

《Applied Ocean Research》2015

Bottom ventilated cavitation has been proven as a very effective drag reduction technology for river ships and planning boats. The ability of this technology to withstand the sea wave impact usual for seagoing ships depends on the ship bottom shape and could be enhanced by some active flow control devices. Therefore, there is the need in numerical tools to estimate the effects of bottom changes and to design such devices. The fundamentals of active flow control for the ship bottom ventilated cavitation are considered here on the basis of a special model of cavitating flows. This model takes into account the air compressibility in the cavity, as well as the multi-frequency nature of the incoming flow in wavy seas and of the cavity response on perturbations by incoming flow. The numerical method corresponding to this model was developed and widely manifested with an example of a ship model tested in a towing tank at Froude numbers between 0.4 and 0.7.The impact of waves in head seas and following seas on cavities has been studied in the range of wavelengths from 0.45 to 1.2 of the model (or ship) length. An oscillating cavitator-spoiler was considered as the flow controlling devices in this study. The oscillation magnitude and the phase shift between cavitator oscillation and the incoming waves have been varied to determine the best flow control parameters. The main results of the provided computational analysis include oscillations of cavity surface, of the pressure in cavity and of the moment of hydrodynamic load on the cavitator. The major part of computations has been carried out for the flap oscillating at the frequency coinciding with the wave frequency, but the effect of a frequency shift is also analyzed.  相似文献   

Compliance of Royal Naval ships with nitrogen oxide emissions legislation     

D.J. Blatcher  I. Eames 《Marine pollution bulletin》2013

Nitrogen oxide (NO_x) emissions from marine diesel engines pose a hazard to human health and the environment. From 2021, demanding emissions limits are expected to be applied to sea areas that the Royal Navy (RN) accesses. We analyze how these future constraints affect the choice of NO_x abatement systems for RN ships, which are subject to more design constraints than civilian ships. A weighted matrix approach is used to facilitate a quantitative assessment.  相似文献   

Understanding ship-grounding impacts on a coral reef: potential effects of anti-foulant paint contamination on coral recruitment     

Negri AP  Smith LD  Webster NS  Heyward AJ 《Marine pollution bulletin》2002,44(2):111-117

The 184 m cargo ship Bunga Teratai Satu collided with Sudbury Reef, part of the Great Barrier Reef and remained grounded for 12 days. The ship was re-floated only 3 days prior to the November 2000 mass coral spawning. No cargo or fuel was lost but the impact resulted in significant contamination of the reef with anti-foulant paint containing tributyltin (TBT), copper (Cu) and zinc (Zn). Larvae of the reef-building scleractinian coral Acropora microphthalma were exposed to various concentrations of sediment collected from the grounding site in replicated laboratory experiments. Two experiments were performed, both of which used varying ratios of contaminated and control site sediment in seawater as treatments. In the first experiment, the influence of contaminated sediment on larval competency was examined using metamorphosis bioassays. In the second, the effect of contaminated sediment upon larval recruitment on pre-conditioned terracotta tiles was assessed. In both experiments, sediment containing 8.0 mg kg(-1) TBT, 72 mg kg(-1) Cu and 92 mg kg(-1) Zn significantly inhibited larval settlement and metamorphosis. At this level of contamination larvae survived but contracted to a spherical shape and swimming and searching behaviour ceased. At higher contamination levels, 100% mortality was recorded. These results indicate that the contamination of sediment by anti-fouling paint at Sudbury Reef has the potential to significantly reduce coral recruitment in the immediate vicinity of the site and that this contamination may threaten the recovery of the resident coral community unless the paint is removed.  相似文献   

船舶水雾灭火设计方法探讨     

杨传祖  刘焕牢  李日福 《广东海洋大学学报》1998,(4)

论述了水雾灭火的特点,应用范围。以及国内外在船舶消防方面的应用现状。针对我国实际情况,提出了船舶水雾灭火设计的一般要求,对具体设计基本参数,水力计算,系统的监测与控制等进行了探讨,并用计算实例进行验证。  相似文献   

Theoretical, numerical and experimental study on the problem of ergodicity and ‘practical ergodicity’ with an application to parametric roll in longitudinal long crested irregular sea     

Gabriele Bulian  Alberto Francescutto  Claudio Lugni   《Ocean Engineering》2006,33(8-9):1007-1043

This paper addresses the problem of ergodicity of stochastic processes starting from a theoretical point of view, with the aim of obtaining a deeper understanding for practical applications. The problem is tackled bearing in mind the concept of ‘practical ergodicity’, that is, the possibility of obtaining reliable information about ensemble averages by using temporal averages. Some general analytical tools are given to address the problem of accuracy of temporal averages and an example of their use in a possible design of experiments is given. A series of Monte Carlo numerical simulations are performed by means of an analytical non-linear 1.5-DOF model of parametrically excited roll motion. The outcomes of such simulations are analysed to show the effect of ship speed and sea spectrum shape. The effect of wave grouping phenomenon is discussed with particular attention to the Doppler effect. Qualitative indications given by the numerical simulations are then compared with experimental tests showing a good agreement. Practical ergodicity of generated sea in towing tank is also briefly addressed.  相似文献   

An inverse hull design approach in minimizing the ship wave   总被引：1，自引：0，他引：1  

Po-Fan Chen  Cheng-Hung Huang   《Ocean Engineering》2004,31(13):2782-1712

The Levenberg–Marquardt Method (LMM) and a panel code for solving the wave-making problem are utilized in an inverse hull design problem for minimizing the wave of ships. A typical catamaran is selected as the example ship for the present study. The hull form of the catamaran is described by the B-spline surface method so that the shape of the hull can be completely specified using only a small number of parameters (i.e. control points). The technique of parameter estimation for the inverse design problem is thus chosen. The LMM of parameter estimation, which is the combination of steepest descent and Newton’s methods, has been proven to be a powerful tool for the inverse shape design problem. For this reason it is adopted in the present study.In the present studies, the inverse hull design method can not only be applied to estimate the hull form based on the known wave data of the target ship but can also be applied to estimate the unknown hull form based on the reduced wave height. The optimal hull forms of minimizing wave for a typical catamaran in deep water at service speed and at the critical speed of shallow water are estimated, respectively. Moreover, a new hull form with the combining feature of the optimal hull forms for deep water and shallow water is performing well under both conditions. The numerical simulation indicates that the hull form designed by inverse hull design method can reduce the ship wave significantly in comparison with the original hull form.  相似文献   

3-D geometric modeler for rapid ship safety assessment   总被引：1，自引：0，他引：1  

Dongkon Lee  Soon-Sup Lee  Beom-Jin Park 《Ocean Engineering》2004,31(10):1219-1230

CAD systems are used broadly in the shipbuilding industry. CAD systems for naval architecture are a useful tool for hull form, internal arrangement and the structural design of ships. These systems require high precision and expertise for efficient use. Therefore, these systems are not appropriate in supporting emergency responses, which require rapid modeling even if it generates some errors.This paper describes a geometric modeler for rapid ship safety assessment. The modeler is developed based on the 3-D geometric modeling kernel ACIS. The definition of hull form, internal arrangement and major longitudinal structural members is a fundamental function of the modeler. The developed modeler is interfaced with other applications used for ship safety assessment such as hydrostatic calculation, ship motion analysis in wave condition, longitudinal strength analysis and so on. In addition, it can generate a new ship model by making variations in a previously defined ship model.  相似文献   

Assessment of manoeuvring performance of large tankers in restricted waterways: a real-time simulation approach     

K. Sariz  E. Narli 《Ocean Engineering》2003,30(12):1535-1551

During the past 30 years there has been a steady growth in the size and number of ships that use the Strait of Istanbul (Bosporus) which is one of the most hazardous, crowded, difficult and potentially dangerous waterways in the world. There have been over 200 accidents over the past decade resulting in loss of life and serious damage to the environment. This paper presents the results of a real-time ship manoeuvring simulation study investigating the manoeuvring performance of large tankers in the Bosporus. The study was conducted with a ship manoeuvring simulator which is capable of subjecting a given hull form to any combination of environmental conditions, i.e. wind, current and wave drift forces. The results indicate that when realistic environmental conditions are taken into account the size of ships which can navigate safely in compliance with the traffic separation lanes is limited.  相似文献   

Calculation of a capsizing rate of a ship in stochastic beam seas     

Kim Sung Hoon  Rhee Key-Pyo 《Ocean Engineering》2006,33(3-4):425-438

This study introduces a method of calculating a capsizing rate of a ship. The phenomenon ‘capsizing’ is described as a jump of local equilibrium point from that near the upright position of a ship to what describes the upside-down attitude of the capsized ship; the rate of occurrence of such jumps was calculated. The potential function corresponding to the roll restoring moment have two potential wells located at the roll displacement angle 0 and 180°, respectively. A nonlinear Fokker–Planck equation for the joint probability density function of roll angle and velocity was solved. The excitation to the ship was assumed to be a combination of a regular harmonic wave and a white noise process.  相似文献   

Maneuvering control and trajectory tracking of very large crude carrier     

Witold Gierusz  Nguyen Cong Vinh  Andrzej Rak 《Ocean Engineering》2007,34(7):932-945

This paper presents a complex control system of the ship motions in confined waters. The general structure of this system is based on the two different controllers connected in parallel. They are dedicated to the different tasks and operate in different conditions. One of them is based on the robust control technology while another is based on the fuzzy logic technique. To decide which controller to use depends on the velocity of the vessel. The control system was implemented at the first stage on a nonlinear multi-variable simulation model and at the second stage on a real-time object—floating, autonomous model of the very large crude carrier (VLCC tanker). The whole system was developed in the MATLAB/Simulink platform.  相似文献