鄂尔多斯西缘北段大型陆缘逆冲推覆体系   总被引：5，自引：0，他引：5       下载免费PDF全文

张家声  何自新  费安琪  李天斌  黄雄南 《地质科学》2008,43(2):251-281

鄂尔多斯西缘北段是一个自中生代末以来形成的、结晶基底和早古生代大陆边缘沉积盖层同时卷入的巨型陆缘逆冲推覆构造体系。根据区域地层发育、变形岩石属性、冲断层几何学以及它们与联冲断层的关系,大体上可以分为不同形成阶段的3个冲断层构造组合,包括9个次级构造单元(B₁—B₇,B_N,B_S)。受冲断层运动自西向东的一致推进,整体呈现一个局部被近东西走向联冲断层切错、向东凸出的弧形:前端为陆缘褶皱冲断带;中部表现为一系列"原地"或"异地"推覆体和冲断席,发育低角度滑脱层和双冲构造;后部又被最晚期的冲断体叠置。侏罗-白垩纪为逆冲推覆构造的主要发展阶段,经历了3期主要的冲断层作用。第Ⅰ期发生在侏罗纪末,沿阿拉善—华北两类不同性质结晶基底之间的主滑脱面发生大规模冲断层作用,形成桌子山—岗德尔山褶皱冲断带。第Ⅱ期冲断层作用的持续位移,形成了具有上、下两个构造层的石嘴山—尖山大型异地推覆体,主滑脱面为石炭纪煤系地层,其中发育典型的双冲构造。新生代(距今65Ma)以来,印度—欧亚板块挤压碰撞和青藏高原早期向北推挤,加剧了鄂尔多斯西缘逆冲推覆构造的进一步发育,第Ⅲ期冲断层作用在东部陆缘褶皱冲断带形成了苏海图反冲构造的同时,在西部将异地推覆体下部的奥陶系再次推至地表。第Ⅰ期和第Ⅱ期冲断层作用累计位移幅度可能达到60~80km,第Ⅲ期冲断层作用的位移幅度为8km。相邻冲断席之间位移矢量的差异,通过近东西走向的联冲断层得到了调整。  相似文献   

Deciphering thrust fault nucleation and propagation and the importance of footwall synclines     

《Journal of Structural Geology》2016

In this paper, we analyze small scale examples of thrust faults and related folding in outcrops of the Cretaceous Boquillas Formation within Big Bend National Park in west Texas to develop detailed understanding of the fault nucleation and propagation that may aid in the interpretation of larger thrust system structure. Thrust faults in the outcrop have maximum displacements ranging from 0.5 cm to 9 cm within competent limestone beds, and these displacements diminish both upward into anticlines and downward into synclines within the interbedded and weaker mudrock layers. We interpret the faults as having nucleated within the competent units and partially propagated into the less competent units without developing floor or roof thrusts. Faults that continued to propagate resulted in hanging wall anticlines above upwardly propagating fault tips, and footwall synclines beneath downwardly propagating fault tips. The observed structural style may provide insights in the nucleation of faults at the formation scale and the structural development at the mountain-range scale. Décollement or detachment layers may be a consequence rather than cause of thrust ramps through competent units and could be over interpreted from seismic data.  相似文献   

Aspects of the structural and late thermal evolution of the Redbank Thrust system,central Australia: Constraints from the Speares Metamorphics     

《Australian Journal of Earth Sciences》2013,60(6):983-999

We present new data on the field geology and late thermal evolution of the Redbank Thrust system in the Arunta Block of central Australia. Geochronological and field data from the Speares Metamorphics are also used to relate the thermal evolution of the Redbank Thrust system to the structural evolution of the region. We show that several stages in the evolution might be discerned. An originally sedimentary sequence was intruded by mafic intrusions and then deformed during partial melting to form the principal foliation observed in the region (D1). This sequence was then folded during D2 into upright folds with north‐ to northeast‐plunging fold axes. These events are likely to correlate with the Strangways and/or Argilke and Chewings Orogenies known from previous studies. Subsequently, the Redbank Thrust was initiated during D3. This event is recognised by deflection of the host rocks into the shear zone and might therefore have been associated with a component of strike‐slip motion. It occurred probably at or before 1500–1400 Ma. Subsequent north‐over‐south thrust motion in the Redbank Thrust formed the intense mylonitic fabric and folded the mylonitic fabric during D4 into asymmetric folds with shallow fold axes. New ⁴⁰Ar/³⁹Ar K‐feldspar ages from three samples collected from variably deformed branches of the Redbank Thrust and undeformed rocks in the Speares Metamorphics suggest that most parts of the Redbank Thrust system cooled relatively slowly after metamorphism and deformation in the Mesoproterozoic so that the D4 thrusting might have been very long‐lived. Minimum ages of the K‐feldspar age spectra show that the entire region cooled below 200°C by approximately 300 Ma. Apatite fission track ages from nine samples show that cooling through the apatite partial annealing zone occurred during Cretaceous time (ca 150–70 Ma) and modelled cooling histories are consistent with the cooling rates obtained from the K‐feldspar data. They indicate that final exhumation of the Redbank Thrust system occurred probably in response to erosion, possibly driven by rifting around the margins of Australia.  相似文献   

云南丽江-剑川断裂带活动性研究   总被引：1，自引：0，他引：1  

许晶莉  刘顺  张燕 《云南地质》2012,(1):113-116,92

断裂带左旋运动起始于新构造运动。早更新世丽江盆地形成之后,斜向穿过丽江盆地的丽江-剑川断裂带对丽江盆地形成现今形态有很强的改造作用。丽江-剑川断裂带最新的一次活动应在早更新世后,以脆性变形为主,韧性变形为辅的断裂带,近期活动深度不很大。  相似文献   

云南普洱萝卜山铅锌矿隐伏矿找矿思路     

李章雄  刘丽华  纪辉 《云南地质》2012,(1):39-42

以区内发育大型逆冲推覆构造及已控制矿体为基础,根据逆冲推覆构造成矿理论,经野外实地调查和对已有地质资料的综合分析,提出在本区寻找隐伏矿体找矿思路。  相似文献   

兰坪盆地连城Cu-Mo多金属矿床流体包裹体和稳定同位素地球化学研究   总被引：3，自引：3，他引：0  

张锦让  温汉捷  秦朝建  王加昇 《岩石学报》2012,28(5):1373-1386

兰坪盆地贱金属矿床是一套独特的受逆冲推覆构造系统控制的矿床类型,连城Cu-Mo多金属矿床是其重要组成部分。成矿过程包括早、中、晚三个阶段,分别以石英-辉钼矿、石英-多金属硫化物和石英-碳酸盐组合为标志。矿区不同阶段石英中广泛发育流体包裹体,可分为水溶液包裹体(A型)、纯CO2包裹体(C型)、CO2-H2O包裹体(B型)三类。早、中阶段主要发育B型和A型包裹体,均一温度集中在177～346℃,流体盐度介于1%～22%NaCleqv之间,密度介于0.67～1.04g/cm3;晚阶段主要发育A型包裹体,均一温度为121～185℃,流体盐度介于1%～9%NaCleqv之间。发育在早、中阶段的B型和C型流体包裹体气相成分主要为CO2,含有少量的CH4。成矿压力为50～160MPa,成矿深度为5～5.9km。矿区不同阶段矿石氧同位素组成总体变化较小(5.5‰～8.6‰),氢同位素变化较大(-56‰～-109‰),碳同位素组成变化为-3.4‰～-8.1‰,表明成矿流体可能以岩浆源为主,并伴有大气降水的参与。综合对比研究认为,65Ma左右印度-亚洲大陆发生对接碰撞,由此诱发的岩浆热液作用可能导致了连城Cu-Mo多金属矿床形成。温度的降低和流体的不混溶是导致钼等成矿元素沉淀和富集的重要机制。  相似文献   

长江中下游燕山期逆冲推覆构造及成因机制   总被引：8，自引：5，他引：3  

王鹏程  李三忠  刘鑫  余珊  刘博  索艳慧  薛友辰  安慧婷 《岩石学报》2012,28(10):3418-3430

长江中下游地区为我国著名铜、铁多金属成矿带之一.本文根据长江中下游及邻近地区构造等特征,将该区构造单元自北向南划分为华北地块、大别造山带、长江中下游前陆构造带、扬子地块、华夏地块;并进一步将长江中下游前陆构造带细分为保康-武汉-宿松-巢湖褶冲带、长江中下游中生代坳陷带、通山-瑞昌-石台-宁国褶冲带三个次级构造带.在燕山早期,长江以北的保康-武汉-宿松-巢湖褶冲带逆冲构造极性指向SE,而长江以南的通山-瑞昌-石台-宁国褶冲带逆冲构造极性指向NW.长江以南褶皱样式在岳阳-通山-瑞昌一线以南由隔挡式变为隔槽式,叠瓦式逆冲断裂更发育.在九岭-幕阜山隆起及南部的白垩纪红色盆地基底中逆冲断裂多为高角度,褶皱多为隔槽式,元古宇的浅变质岩卷入逆冲作用,为典型的厚皮构造.长江以北的紧闭同斜褶皱主体形成在印支期,随后被早燕山期的逆冲推覆作用改造.结合野外地质调查,通过对已有跨长江中下游地区的深地震剖面重新解释,发现以长江为界,长江中下游地区北侧深部、浅部构造处于耦合状态;而南侧深部、浅部构造已经脱藕,形成上下地壳的“鱼骨刺”结构,深部构造可能是是印支期扬子地块向华北地块下俯冲的残余结构.长江中下游地区浅部从北向南的逆冲作用应该与大别造山带超高压变质岩挤出有关,而从东南向北西的逆冲推覆作用可能同中侏罗世古太平洋板块向亚洲大陆俯冲有关.  相似文献   

西昆仑山前冲断带断裂特征及构造单元划分   总被引：3，自引：1，他引：2  

程晓敢  黄智斌  陈汉林  杜治利  李康  师骏 《岩石学报》2012,28(8):2591-2601

受新生代帕米尔构造结大幅度向北推移、旋转的影响,形成了弧形的西昆仑山前冲断带.本文主要通过野外地质调查、地震反射剖面的精细解释,对西昆仑山前冲断带最基本的组成部分-断裂进行系统研究.西昆仑山前冲断带内以发育与其弧形形态一致的逆冲断裂为主,但弧形冲断带中段的断裂具有挤压逆冲的同时兼有右行走滑性质.冲断带内还发育了NE 向和近EW向的走滑断裂,它们的发育时间和成因不尽相同,它们控制了冲断带内的变形,调节和改造了早期形成的构造.在对断裂系统研究的基础上,结合冲断带各个部位的结构特征和变形时间,将冲断带划分为9个次级构造单元.西昆仑山前冲断带开始发育于中新世中晚期,此后经历了上新世早期、上新世中晚期、早更新世早中期以及早更新世晚期四个演化阶段.  相似文献   

广东省大埔县赤羌坪滑坡稳定性评价及防治对策     

廖武坚 《中国地质灾害与防治学报》2010,21(4):39-43

由于赤羌坪地质环境条件及不利气象因素影响,致使古滑坡复活,直接威胁当地群众生命财产及道路交通安全。本文在滑坡地质灾害勘查的基础上,分析了影响滑坡稳定性的因素,采用剩余推力传递法进行滑坡稳定性定量评价,得出:天然状态下,滑坡处于不稳定状态,在持续降雨及强降雨作用下,稳定程度进一步降低,随时有大规模滑动破坏的危险。为此,提出了"排水+锚索抗滑桩支挡"工程治理方案对滑坡进行工程治理。  相似文献   

雪峰山西侧贵州地区中生代构造特征及其演化     

刘丽萍  李三忠  戴黎明  王岳军刘博  金宠  张国伟 《地质科学》2010,45(1):228-242

贵州中生代变形主要发生在燕山期,发育三幕褶皱变形、两幕逆冲和三幕走滑。根据区域对比、卷入褶皱的地层和褶皱间的叠加关系,判断三期褶皱的形成顺序依次为近东西向、北东向和南北向,时限在J3—K2之间。逆冲推覆构造主要由向北西或西逆冲的近南北向逆冲断层组成,大体与南北向褶皱同时形成; 自雪峰构造带西缘向西,依次划分出根部带、中部带和前锋带。但是,在根部带识别出两幕逆冲推覆,其它两带各识别出一幕。走滑断层也有3个方向：东西向、北东向和近南北向。东西向走滑断层呈现出右行压扭的运动学特征,而大多数北东向走滑断层是左行张扭性质的。依据各个方向断层间的切割和限制关系,推测东西向走滑断层最早形成,其次是南北向逆冲断层,北东向走滑断层最晚活动。这些断裂和褶皱特征,总体表现出贵州多重多种复合联合的构造特征,最后,探讨了本区的构造成因模式。  相似文献