Establishment and application of an intelligent treating method for oil spill identification     

TAN Liju  ZHAO Ruxiang  YIN Xiaonan  ZHANG Haijiang  WANG Jiangtao 《海洋学报(英文版)》2018,37(11):116-122

In the identifying process of an oil spill accident, manual integral and artificial visual comparison are commonly used at present to determine the oil spill sources, these methods are time-consuming and easily affected by human factors. Therefore, it is difficult to achieve the purpose of rapid identification of an oil spill accident. In this paper, an intelligent method of automatic recognition, integration and calculation of diagnostic ratio of Gas Chromatography-Mass Spectrometer (GC/MS) spectrum are established. Firstly, four hundreds of samples collected around the world were analyzed using a standard method and Retention time locking technology (RTL) was applied to reduce the change of retention time of GC/MS spectrum. Secondly, the automatic identification, integration of n-alkanes, biomarker compounds, polycyclic aromatic hydrocarbons and calculation of the diagnostic ratios were realized by MATLAB software. Finally, a database of oil fingerprints were established and applied successfully in a spill oil accident. Based on the new method and database, we could acquire the diagnostic ratios of an oil sample and find out the suspected oil within a few minutes. This method and database can improve the efficiency in spilled oil identification.  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献   

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates     

J. Mertens  H. Madsen  M. Kristensen  D. Jacques  J. Feyen 《水文研究》2005,19(8):1611-1633

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

FBX三维模型自动转换为OBJ三维模型方法研究     

闻平  王冲  吴小东  桂林 《测绘与空间地理信息》2016,(1):113-115

本文研究实现了一种FBX三维模型自动转换为OBJ三维模型的方法,包括几何信息和材质信息的自动转换,所述方法包括获取数据、几何信息处理、材质信息处理、OBJ格式输出和材质库文件输出等步骤。  相似文献   

关于制作像控电子点之记方法与流程的探讨     

何云贵  茅琦  王智峰 《测绘与空间地理信息》2016,(9)

主要介绍电子点之记的制作流程及方法,以及所涉及的一些计算机软件和工序中可以自动化处理的程序,对于实现难点也进行了分析及说明,使像片控制测量点之记制作的流程更为简便,成果更为可靠。  相似文献   

国产机载LiDAR系统安置角误差检校方案研究   总被引：1，自引：0，他引：1  

谢劭峰  刘田龙 《测绘与空间地理信息》2016,(6):50-55

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。  相似文献   

迁移学习支持下的高分影像山地滑坡灾害解译模型     

郭加伟  李永树  李政  刘锟铭  张帅毅 《测绘科学技术学报》2016,(5):496-501

无人机低空遥感是近年来新兴的一种快速获取灾情信息的手段,如何利用无人机高分影像构建滑坡灾害解译模型是实现快速自动解译滑坡的关键。针对该问题,对比了多种影像特征提取方法,将迁移学习(TL)特征和支持向量机(SVM)引入到构建滑坡灾害自动解译模型中,提出了一种TL支持下的高分影像滑坡灾害解译模型。选取5·12汶川地震及4·20芦山地震系列无人机影像构建了滑坡灾害样本库并进行了实验,TL特征方法整体分类准确度ACC为95%,ROC达到0.98,识别准确率达到97%。结果表明,所提方法可用于高分影像滑坡自动解译,同时可用于大面积高分影像中快速山地滑坡灾害定位及检测。  相似文献   

FDR土壤水分传感器原状土壤标定方法研究     

王黎明  张雪芬  周旭辉  王建波  陈晨  王爱珍 《气象科技》2016,44(3):347-353

为获得测站准确的土壤水分传感器标定参数,利用自动土壤水分站点的大型原状土壤为样本,在实验室同时进行人工称重观测和仪器自动对比观测,得到一系列的人工自动测量数据,以人工称重数据为准对自动土壤水分传感器进行订正。由于采用原状土壤,样本土壤的质地、密度、土壤颗粒和结合紧密度基本没有受到破坏,订正后的自动土壤体积含水量值能更加真实反映台站实际土壤墒情,能够修订人工对比观测期间由于样本空间不足导致的不合理的田间标定方程。  相似文献   

FDR自动土壤水分数据标定问题及解决方法   总被引：4，自引：0，他引：4  

周旭辉  王黎明  王建波  陈晨  王爱珍  刘焕乾  廖华 《气象科技》2016,44(4):535-541

针对目前FDR自动土壤水分数据可用性低的实际情况,本文从FDR自动土壤水分站传感器原理出发,结合数据处理流程与方法对湖南60个站点不同层次的标定参数及部分站点的相关观测数据进行了分析,指出目前田间标定法在自然条件下几乎无法得到覆盖土壤各个湿度区间的均匀样本数据,导致二次标定参数不合理是造成FDR自动土壤水分站数据可用性差的根本原因。二次标定方程参数不合理主要表现为方程斜率过大、过小、负值3种情况,导致观测数据增幅过大、常年不变、与实际土壤湿度变化趋势完全相反等问题。最后针对该问题提出了大样本原状取土,实验室标定的解决方法,并对方法进行了初步验证,结果表明该方法能从源头上有效改善土壤水分站观测数据质量。  相似文献