陕西农村房屋抗震设防现状及对策          下载免费PDF全文

王哲  张艳 《地震工程学报》2005,27(4):354-356

陕西省近年来发生的泾阳和石泉两次地震造成了农村房屋不同程度地破坏。通过对这两次地震的现场考察,分析总结了陕西农村房屋抗震设防现状及存在的主要问题,并提出了相应的改进措施及对策建议。  相似文献   

The effect of bed mobility on resistance to overland flow     

Shixiong Hu  Athol D. Abrahams 《地球表面变化过程与地形》2005,30(11):1461-1470

When sediment grains are transported as bed load in overland flow, there is a net transfer of momentum from the flow to the grains. When these grains collide with other grains, whether on the bed or in the flow, streamwise flow velocity decreases and resistance to flow increases. Resistance to flow generated in this manner is termed bed‐load transport resistance. Resistance to flow f over a plane bed may be partitioned into grain resistance f_g and bed‐load transport resistance f_bt. We use the symbols f_btf and f_btm to denote f_bt for flows over fixed beds and over mobile beds, respectively, and we compute the effect of bed mobility on flow resistance f_mob by subtracting f_btf from f_btm. The data for this study come from 54 flume experiments with fixed beds and 38 with mobile beds. On average f_mob is approximately equal to half of f_btm, which is about one‐quarter of f. Hence, f_mob is about one‐tenth of f. Predictive equations are developed for f_btf, f_btm and f_mob using dimensional analysis to identify the relevant independent variables and regression analysis to evaluate the coefficients associated with these variables. Values of f_mob are always positive which implies that mobile beds offer greater resistance to flow than do fixed beds. Evidently bed‐load grains colliding with mobile beds lose more momentum to the bed than do grains colliding with fixed beds. In other words, grain collisions with mobile beds are less elastic than those with fixed beds. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

嵌岩桩嵌岩段侧摩阻力浅析          下载免费PDF全文

王勇刚  李镜培 《探矿工程》2005,32(10):6-9

为求出嵌岩桩嵌岩段侧摩阻力的表达式，假定嵌岩桩桩侧破坏由桩岩接触面上的滑动引起，桩岩接触面的压力由加载前岩土层自重产生的侧压力和由剪切膨胀产生的应力增量组成。用弹性力学的方法求解出桩侧正应力，引入了岩石破坏的Hoek-Brown强度准则，由此求出了嵌岩段桩侧阻力的表达式，并指出了此公式的适用范围。最后结合工程实际进行了对比分析，表明本文方法具有一定的实用性。  相似文献   

Temporal variation of soil erosion resistance on sloping farmland during the growth stages of maize (Zea mays L.)     

Rui Ma  Zicheng Zheng  Tingxuan Li  Shuqin He  Xizhou Zhang  Yongdong Wang  Huagang Huang  Daihua Ye 《水文研究》2021,35(9):e14353

Maize growth has great effects on soil properties and thus likely induces the changes in soil erosion resistance on sloping farmland. However, temporal variation of soil erosion resistance during the growth stages of maize is still unclear in the mountainous yellow soil area where maize is the dominant crop. In this study, four maize plots (MP) and four bare land plots (CK) were conducted to investigate soil erosion resistance, and multiple indicators of soil erosion resistance were measured including the total soil anti-scourability (TAS), mean weight diameter (MWD), soil erodibility K factor and soil shear strength (SH). A comprehensive soil erosion resistance index (CSERI) was employed to quantify the temporal variation of soil erosion resistance during the growth stages of maize (seedling stage, SS; jointing stage, JS; tasselling stage, TS; maturing stage, MS). The results showed that TAS, MWD, SH increased significantly with maize growth and SH decreased when at MS. But K factor decreased significantly over time. CSERI increased significantly during the growth stages of maize and the CSERI of JS, TS, MS increased on average by 74.72, 180.68 and 234.57% than that of SS. Compared to CK, CSERI of MP increased by 49.90, 66.82, 55.60 and 38.61% during the growth stages of maize. The temporal variation of soil erosion resistance was closely related to the changes in maize cover, maize roots and soil organic carbon. The findings demonstrated that it is necessary to consider the temporal variation of soil erosion resistance in the mountainous yellow soil area.  相似文献   

仿生高效切削齿试验研究          下载免费PDF全文

高科  唐琼琼  孙阳  谢晓波 《探矿工程》2016,43(8):69-71

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。  相似文献   

新型抗高温二次交联凝胶堵漏材料的研制          下载免费PDF全文

胡子乔  刘四海  张金成  李大奇  褚奇 《探矿工程》2016,43(7):103-106

针对普通凝胶抗温能力较差难以适用于高温地层堵漏作业的问题,通过设计合成抗高温凝胶主剂GN-1并运用二次交联技术,研发了新型抗高温凝胶堵漏材料。优选配方为：淡水+1.5%GN-1+0.15%地面交联剂+1%井下交联剂+0.2%抗氧化剂。通过热滚老化与高温流变测试相结合的手段对凝胶抗温能力进行评价。结果表明,该凝胶材料具有良好的热稳定性,在180 ℃下老化24 h后,7.34 s-1下剪切粘度＞10000 mPa?s。大幅加重后180 ℃老化24 h仍能保持较好的粘弹性。此外还考察了不同温度和pH值下的成胶性能以及与聚磺钻井液体系的配伍性,为抗高温凝胶堵漏材料在现场的应用奠定基础。  相似文献   

沟岸侧蚀对泥石流不稳定动力过程的影响          下载免费PDF全文

吕立群  王兆印  崔鹏  徐梦珍 《水科学进展》2018,29(2):213-220

泥石流作为非牛顿体,屈服应力大,运动过程通常不稳定。前人建立了许多模型来研究沟床揭底和堰塞体溃决对泥石流不稳定动力过程的影响,沟岸侧蚀对泥石流不稳定动力过程的影响研究较少。通过侧蚀为主的模型和完全底蚀的模型两种水槽实验的对比,针对泥石流的动力过程展开研究。实验发现两种工况条件下泥石流正应力和孔隙水压力随着龙头高度沿程波动性的增长而相应地波动性增大,但侧蚀作用使得这种波动特征更加明显。通过力学分析,证明侧蚀作用导致泥石流龙头的阻力更大,但是龙身颗粒和龙头颗粒的速度差更大,使得龙头附加坡降更大,因此,侧蚀作用使得泥石流龙头的平均速度更快。泥石流龙头浓度和容重的不断增大,使得阻力不断增大,阻力和动力的动态平衡关系是泥石流不稳定运动的原因之一。  相似文献   

六种成膜封堵剂的室内实验优选与评价          下载免费PDF全文

王建伟 《探矿工程》2021,48(3):73-77

为更好地服务深部钻探工程,准确了解冲洗液封堵性能,对6种成膜封堵剂开展了砂床实验、API静失水量实验、流变性能实验及抗温实验等室内实验进行优选与评价。实验结果表明,2号和4号成膜封堵剂在6种成膜封堵剂中封堵性能最好,它们在基浆中的最优加量均为2%,100 ℃温度条件下加入这2种封堵剂的冲洗液具有较好的抗温性能;冲洗液中膨润土含量和处理剂是影响冲洗液封堵性能的2个重要因素：膨润土含量越高,冲洗液封堵性能越好,加入聚合物、降滤失剂等处理剂可以提高冲洗液的封堵性能。砂床实验是评价冲洗液封堵性能好坏的重要依据。  相似文献   

成层软土地基预固结处理后桩基水平承载力估算方法     

黄朝煊  袁文喜  胡国杰 《岩土力学》2021,(1):113-124,134

目前通过对软土地基预加固处理来提高桩基水平承载力已被工程界认可,但如何在工程前期设计过程中估算软土地基预处理后桩基水平承载力提高值仍是技术难点。基于此,参考Bowles[1]的地基土水平抗力计算式,同时考虑成层软土地基预排水固结处理影响,通过数学推导,推求出根据原状软土室内土工试验抗剪强度指标及预加固处理时间,估算软土地基预处理后桩基水平承载力提高值的实用计算方法。考虑桩侧土弹塑性屈服影响,推导出成层软土中水平受荷桩弹塑性解析解及塑性区深度的计算式,给出了桩顶水平位移、桩身最大弯矩的无量纲计算式及相关计算源代码。依托于浙江省某水闸桩基工程案例,根据提出的计算方法对桩基水平承载力、桩顶水平位移及桩身最大弯矩等性状进行预估计算,并与地基预处理前、后现场试桩检测值进行验证对比,认为桩基水平承载力、桩顶水平位移及桩身最大弯矩等预估计算成果与工程现场试桩的检测值较接近,对类似工程设计具有较好的参考价值。  相似文献   

井筒电加热改善水平井蒸汽吞吐效果机理实验     

吴永彬  吕柏林  杜宣  卢迎波  蒋有伟  邢向荣 《现代地质》2021,35(4):1136-1146

针对稠油水平井蒸汽吞吐面临入井渗流阻力大、产量水平低、吞吐递减率高、采收率偏低等问题,提出了电加热辅助水平井蒸汽吞吐方法。首先根据水平井蒸汽吞吐过程中的电加热与蒸汽复合传热特征,建立了电加热辅助蒸汽吞吐三个阶段的(注汽阶段、焖井阶段、生产阶段)储层升温解析模型,在此基础上,设计并开展了电加热辅助蒸汽吞吐和常规水平井吞吐的宏观比例物理模拟对比实验,通过实验验证了解析公式,揭示电加热改善水平井吞吐效果关键机理,并利用实际典型井模型进行了潜力预测。结果表明:电加热协同蒸汽吞吐,具有注蒸汽阶段实现水平段均匀加热升温、焖井阶段持续热补偿加热近井地带、生产阶段降低原油入井渗流阻力并提高吞吐产量的关键机理。典型井组预测电加热辅助水平井吞吐可提高吞吐采收率9.4%,油汽比从0.14提高到0.23,在水平井蒸汽吞吐油藏具有重要应用潜力。  相似文献