Experimental characterization of the impact of temperature and humidity on the breakdown of soil water repellency in sandy soils and composts          下载免费PDF全文

Amii Whelan  Cedric Kechavarzi  Frederic Coulon  Stefan H. Doerr 《水文研究》2015,29(8):2065-2073

Soil water repellency is a widespread phenomenon with the capacity to alter hydrological and geomorphological processes. Water repellency decays with time, and the consequences are only of concern during the timescale at which the water repellency persists. This study aimed to characterize the influence of temperature and humidity on the breakdown of water repellency. Apparent contact angle measurements were carried out on samples consisting of sand treated with stearic acid as well as naturally repellent dune sands and composts. Temperature and humidity were controlled using a cooled incubator and a purpose designed enclosed box in which humidity could be raised or lowered. Results showed the contact angle of the stearic‐acid‐treated sands decayed with time and that there was a significant increase with stearic acid concentration. For all samples, the decay in apparent contact angle could be described with a continuous breakdown model. The stearic‐acid‐treated sands showed a significant increase in contact angle with relative humidity at a temperature of 10 and 20 °C. These differences diminished with increasing temperature. Similar results were seen for the dune sands and composts. Despite the influence of temperature and humidity on contact angles, there was no significant change in the rate at which the contact angle decayed in any sample. Absolute humidity was found to provide a more relevant indicator than relative humidity when assessing the influence of humidity on repellency over a range of temperatures. The contact angle initially increased with absolute humidity before plateauing owing to the confounding effect of temperature. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Estimation of near surface soil moisture in a sloping terrain of a Himalayan watershed using ENVISAT ASAR multi‐incidence angle alternate polarisation data          下载免费PDF全文

Sameer Saran  Geert Sterk  Rajiv Nair  R. S. Chatterjee 《水文研究》2014,28(3):895-904

Soil moisture is one of the important input variables in hydrological and water erosion models. The extraction of information on near surface soil moisture from synthetic aperture radar (SAR) is well established mostly for flat terrain and using low incidence angle single polarisation data. The ENVISAT advanced SAR (ASAR) data available in multiple incidence angles and alternate polarisation modes were investigated in this study for soil moisture estimation in sloping terrain. The test site was Sitla Rao watershed in the Lesser Himalayas of northern India. Empirical models were developed to estimate near surface soil moisture in bare agricultural fields using alternate polarisation ASAR data. Both soil moisture and surface roughness field measurements were performed during the satellite passes. Backscatter from medium incidence angle (IS‐4) and vertical‐vertical (VV) polarisation signal is correlated better with volumetric soil moisture content compared to other incidence angles. The model parameters were further improved, and soil moisture estimation was refined by combining medium incidence angle (IS4) vertical‐horizontal polarisation response as another variable along with VV polarisation response. The effect of slope on the radar backscatter was minimized by incorporating local incidence angles derived from an ASTER DEM. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

基于光谱角匹配算法的水体信息提取研究     

齐庆超  张小磊  金江峰  金玉玲 《测绘与空间地理信息》2016,(2):93-96

针对水体信息提取时,传统算法不能较好地解决山体阴影被误提为水体的问题,引入多用于高光谱数据处理的光谱角匹配算法,以Land-sat8 OLI(band1-band7)为数据源,以黄河小浪底水库周边区域为实验区,开展水体信息提取研究,结果显示:水体指数法和波段关系提取的结果中有大量的山体阴影信息,提取精度不超过30%,而光谱角匹配法提取结果受阴影的影响较小,提取精度在99%以上。  相似文献   

基于NGM(1,1,k,c)模型和改进切线角的危岩变形预测     

刘富有  陈鹏宇  余宏明 《测绘与空间地理信息》2016,(6):8-10

针对危岩变形预测问题,本文以非齐次指数序列的灰色模型(NGM)作为危岩变形预测的基本模型,通过对望霞危岩变形的分析结果显示,NGM(1,1,k,c)模型拟合效果明显优于GM(1,1)模型,说明危岩变形趋势更接近于非齐次指数序列。利用NGM(1,1,k,c)模型结合改进切线角可对危岩变形趋势进行分析预测,可作为危岩稳定性和发展趋势的评估依据。  相似文献   

国产机载LiDAR系统安置角误差检校方案研究   总被引：1，自引：0，他引：1  

谢劭峰  刘田龙 《测绘与空间地理信息》2016,(6):50-55

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。  相似文献   

城市点云的区域生长三角网构建方法     

李晶晶  范大昭  耿弘毅  纪松 《测绘科学技术学报》2016,(1):65-70

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。  相似文献   

Response of low‐angle dunes to variable flow          下载免费PDF全文

Megan L. Hendershot  Jeremy G. Venditti  Ryan W. Bradley  Ray A. Kostaschuk  Michael Church  Mead A. Allison 《Sedimentology》2016,63(3):743-760

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.  相似文献   

Smoothing and re-roughening processes: The geometric evolution of a single fault zone     

《Journal of Structural Geology》2016

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.  相似文献   

乌南油田滨浅湖砂体储层构型及其油气意义          下载免费PDF全文

石金华  韩登林  于炳松  李仕远  王宝  陈景华 《地质科学》2016,(4):1310-1323

基于Miall储层构型研究思想,结合岩心、测井、测试等资料,对乌南油田砂坝砂体储层构型界面特征进行了研究,确定了储层构型界面识别标志;在此基础上,将砂坝内部构型分为坝主体和坝侧缘,同时通过动、静态结合,明确砂坝外部构型存在孤立、视连通、左侧向叠置和右侧向叠置4种模式;纵向上发育湖退（进积）和湖进（退积）两种砂体发育模式。坝主体是主力储层,具有良好油气显示;坝主体分布面积大、出现频率高为油气有利区域。  相似文献   

三位一体找矿预测模型的表达式     

何进忠 《地质论评》2016,62(S1):31-32

三位一体找矿预测模型是勘查区找矿预测理论遵循的原则。三位是指成矿地质体、成矿结构面、成矿作用标志,一体是指矿体、矿床或矿田。可以理解为成矿地质体、成矿结构面、成矿作用标志决定矿体、矿床或矿田产出的空间位置,反映的是成矿要素与成矿产物之间的空间关系,或者空间结构模型,是由某一个成矿地质体决定的矿床成矿系统的最小单元,如某斑岩体决定的次火山热液成矿系统和同生断裂决定的热水沉积成矿系统。 根据中国地质调查局(2016)颁发的1:50 000 矿产地质调查工作指南(试行),成矿地质体是指与矿床形成在时间、空间和成因上有密切联系的地质体。成矿结构面是指赋存矿体的显性或隐性存在的岩石物理及化学性质不连续面,也就是赋存矿体的各类界面。成矿作用标志是指能够直接指示矿体赋存位置的、对找矿预测具有特殊意义的标志(中国地质调查局,2016)。矿床成岩成矿年代学及成矿作用产物与成矿地质体的空间关系表明,成矿地质体在成矿过程中,仍然主要起导矿构造的作用,尽管部分成矿现象类似于侧分泌成矿,但规模热液矿床的形成必然伴随着大规模流体沿构造通道持续或间歇性运移。完整的成矿系统必然包含源、运、储三个基本环节(翟裕生,2005),所以成矿地质体也可以表述为导矿构造,进而将三位一体找矿预测模型定性地表述为导矿构造、成矿结构面和成矿作用标志决定成矿作用产物产出的空间位置。模型的定量表示则需要研究导矿构造、成矿结构面和成矿作用标志的响应范围及其耦合关系。  相似文献