“雅安天漏”研究 III：特征、物理量结构及其形成机制   总被引：9，自引：5，他引：4  

曾庆存  宇如聪  彭贵康 《大气科学》1994,18(6):649-659

本文的这一部分首先进一步分析了第二部分的预报结果,结果发现,在本文第二部分所建立的模式,不仅较好地预报出了24小时总降水量,而且也较好地预报出了“雅安天漏”的降水特征和降水中的物理结构。模式基本上抓住了形成雅安降水的主要影响因子。然后通过一系列精心设计的数值模拟试验得到了形成雅安降水的可能机制。  相似文献   

勘查油气田化探新方法——土壤相态烃测量法     

李生郁  徐丰孚 《物探与化探》1993,17(6):441-448

烃气测量是油气化探最主要的方法。目前应用的烃气测量方法有两类:一类是测量土壤中游离烃气如K—V指纹法、吸附丝法、物上气法及直接取土壤气测量法等。此类方法由于需特殊设备及壤气测量方法本身固有的缺陷,目前还未得到普遍应用,另一类为土壤吸附烃气法即国内外目前普遍使用的酸解烃气法、此法在多数油气田上取得好效果,但也有相当多的地区如黄土、荒漠及水网发育等特殊景观区效果不好或不显著。本文介绍一种新的烃气测量法──土壤相态烃测量法。这是用一种特殊的技术,只选择性提取由油气藏渗漏过程中保存在运移通道围岩及近地表土壤各种次生矿物结构中以"穴居"态存在的轻烃组分。"穴居"态烃为累积性的指标,不受外界温度、修水等的影响,保存较牢固,测定结果稳定。相态烃法避免了酸解烃法存在的生物成因烃、矿物同生烃及碳酸盐的干扰影响,提高了测量指标的信噪比,突出了应有的异常。本方法已在黄土厚覆盖区两个已知油气田和一个风成沙覆盖的断裂发育油田上试验获得成功,结果表明相态烃法优于酸解烃法。  相似文献   

重视和加强岩矿物性的测量研究     

蒋宏耀  张立敏 《地球物理学进展》1995,10(3):118-123

本文从物探科学技术的进步,勘查任务的发展变化、物探方法应用范畴的扩大和物性勘探等几个方面,论述了岩石和矿物物理性质测量、研究的重要性,指出：物性工作不可能毕其功于一役,并提出了五点建议：１．深入研究各类矿藏及其围岩（直至地面）物性的空间变化规律,为选择、研究合适的物探方法,提高物探效果,进一步探讨“直接”找矿问题,提供依据;２．这项工作可专门进行,但最好尽可能利用为其他目的而设计的钻井进行;３．物  相似文献   

Possible creep-related tilt precursors obtained in the Central Apennines (Italy) and in the Southern Caucasus (Georgia)     

F. Bella  P. F. Biagi  M. Caputo  G. Della Monica  A. Ermini  P. V. Manjgaladze  V. Sgrigna  D. O. Zilpimiani 《Pure and Applied Geophysics》1995,144(2):277-300

Daily averaged tilt component data from two sites of the Central Apennines (Italy) and of the Southern Caucasus (Georgia), respectively, revealed intermediate-term tilts as possible precursors to earthquakes (M=3.0÷4.7) which occurred in the above-mentioned seismic areas within a distance of 50 km from the sites. A good temporal correlation as well as a fair spatial correspondence between these residual tilts (with amplitude and duration of some microradians and months, respectively) and main shocks were pointed out, by removing both secular trends and seasonal thermoelastic effects from the raw tilts. An attempt was made to justify the above-mentioned results, based on the assumption that the observed intermediate-term preseismic tilts are the manifestation of aseismic creep episodes of comparable duration in the fault materials of thrust faults close to the tilt sites. The mechanism refers to a strain field slowly propagating from the preparation focal area to the tilt site, through crustal blocks separated by weak transition zones. This propagation is thought to be the cause of the local aseismic fault slip recorded by the tiltmeters. Previously, both discrete structures and strain propagation effects were revealed in the Central Apennines and are thought also to exist in the Southern Caucasus. As in the past, the rheological properties of fault materials are revealed as viscoelastic ones. In fact, creep equations obtained by applying several viscoelastic models on our data, proved to fit quite well some of the observed tilt precursors, producing viscosity and rigidity values very similar to those reported in literature.Professor Petr Viktorovich Manjgaladze died during the writing of this paper  相似文献   

Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)   总被引：1，自引：0，他引：1  

Axel Vollbrecht  Jan Pawlowski  Bernd Leiss  Till Heinrichs  Madlen Seidel  Andreas Kronz 《Tectonophysics》2006,427(1-4):153

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.  相似文献   

Analysis of the effect of geology, soil properties, and land use on groundwater quality using multivariate statistical and GIS methods     

Jin-Soo Lee Kyung-Seok Ko Tong-Kwon Kim Jae Gon Kim Seong-Hyun Cho In-Suk Oh 《中国地球化学学报》2006,25(B08):152-152

The regional survey of groundwater used as a small water supply system was performed to know the effect of geology, soil properties and land use on groundwater quality at Nonsan City, Korea. A total of 126 groundwater samples were collected and analyzed at the study area. The multivariate statistical methods, principal components analysis and discriminant analysis, and GIS technique were used for the quantitative interpretation of groundwater quality. The study area is mainly composed of Precambrian gneiss, Jurassic granite, and Cretaceous volcanics, and metasedimentary rocks of the Ogcheon zone. The land use was grouped as paddy, upland, grassland, resident, point source, industrial area, and water system. The soil properties were classified as 4 major groups, Entisols, Alfisols, Inceptisols, and Ultisols, by the degree of development, and reclassified as 11 subgroups. The modified and simplified geologic map, soil map, and land use map were made by using ARCGIS soft-ware. The area of geology, soil property, and land use affecting the groundwater quality for each well were also calculated by ARCGIS soft-ware to acquire the quantitative parameters for multivariate statistical analysis. The monitoring results of groundwater in the study area showed that 13%-21% of the groundwater samples exceeded the portable water guideline and the main causes were turbidity, bacteria, arsenic and nitrate-N. The spatial distribution of each component showed the close relationship between groundwater quality and geology reflecting the topography, land use.  相似文献   

Factors controlling the spatial and temporal variability of dust emissions     

John A. Gillies William G. Nickling Vicken Etyemezian James King Mark Sweeney 《中国地球化学学报》2006,25(B08):219-220

New field measurement techniques are allowing researchers to better understand how surficial properties affect the temporal and spatial variability of dust emissions. In this paper we review the current understanding of the dust emission process and present new field measurements that examine how three surface properties： roughness, crust strength, and temporal changes of surface properties affect dust emissions. These data were collected using three unique measurement systems developed by our team. Roughness exerts considerable control on the entrainment threshold and emissions of dust from a surface. We have carried out a series of experiments designed to quantify roughness effects on aeolian sediment entrainment and transport in a shear stress partitioning framework. Our results show that the model of Raupach et al. （1993） provides very good agreement with available data to predict the amount of shearing stress on the intervening surface among roughness elements, relatively independent of their size and distribution. However, element size affects the aeolian sediment transport process beyond that attributable only to the reduction of surface shear stress caused by the roughness. Additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency and potentially dust emissions as well. The effect of crust strength on dust emissions was assessed using a newly-developed pin penetrometer, which can measure crust strength in-situ. Previous researchers suggested that variation in crust strength even within a small area could lead to considerable spatial variability in dust emissions. Our measurements showed that crust strength is highly variable over a scale of centimeters. This variability may help to explain some of the observed scatter in field measurements of dust emissions for what appear to be homogeneous surfaces. Variability of dust emissions in time and space was also evaluated using a new instrument, the Portable In-Situ Wind Erosion Lab （PI-SWERL） developed to measure dust emissions from soil surfaces.  相似文献   

Experimental and numerical studies of rock salt strain hardening     

M. Hamami 《Geotechnical and Geological Engineering》2006,24(5):1271-1292

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.  相似文献   

A Connectivity Index for Discrete Fracture Networks     

C. Xu  P. A. Dowd  K. V. Mardia  R. J. Fowell 《Mathematical Geology》2006,38(5):611-634

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.  相似文献   

Influence of sedimentary environments on mechanical properties of clastic rocks     

Zhaoping Meng  Jincai Zhang  Suping Peng 《Environmental Geology》2006,51(1):113-120

The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress–strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.  相似文献