Geoprobe直推式土壤钻机在涌砂层中的应用          下载免费PDF全文

彭新明  周国庆  李安  佟雪健  郭永岩  薛洪林  白江伟 《探矿工程》2020,47(5):60-64

本文介绍了Geoprobe7822DT、Geoprobe 8040DT、Geoprobe 3230DT三种型号直推式土壤钻机的结构、主要特点和应用情况,并与其他类型功能相近的取样钻机的使用效果进行了对比,分析了Geoprobe直推式土壤钻机在涌砂层钻进中存在护壁功能不足、整体稳定性较差、钻杆易损等主要问题,并对直推式土壤钻机后续的改进和使用提出了建议。  相似文献   

筋土界面特性宏细观分析试验仪器研制与应用     

易富  杜常博  王政宇  于犇 《煤田地质与勘探》2020,48(1):174-182

为了更全面地分析筋土界面相互作用特性,改制了一台可视加筋土界面特性宏细观分析的试验仪器,可开展不同土工合成材料与填料的直剪和拉拔试验;该仪器改进了试验箱的尺寸,可方便两种试验的对比分析,增加了图像摄录系统,可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验,试验结果表明:两种试验条件下,土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大;直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响,拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著,对似摩擦角的影响较小。随着宏观变量法向应力的增加,细观参数孔隙率减小,平均接触数增加,反映在宏观上的现象就是填料颗粒被压密,筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性,获得关键技术指标以用于加筋结构的设计。   相似文献   

Effects of the improper modeling of viscous damping on the first-mode and higher-mode dominated responses of base-isolated buildings     

Hamidreza Anajafi  Ricardo A. Medina  Erin Santini-Bell 《地震工程与结构动力学》2020,49(1):51-73

In many finite element platforms, a classical global damping matrix based on the elastic stiffness of the system (including isolators) is usually developed as part of the solution to the equations of motion of base-isolated buildings. The conducted analytical and numerical investigations illustrate that this approach can lead to the introduction of unintended damping to the first and higher vibration modes and the spurious suppression of the respective structural responses. A similar shortcoming might be observed even when a nonclassical damping model (ie, an assembly of the superstructure and isolation system damping sub-matrices) is used. For example, the use of Rayleigh damping approach to develop the superstructure damping sub-matrix can lead to the undesired addition of damping to the isolated mode arising from the mass-proportional component of the superstructure damping. On the other hand, the improper use of nonclassical stiffness-proportional damping (eg, determining the proportional damping coefficient, β_k , based on the first mode) can result in assigning significant damping to the higher-modes and the unintended mitigation of the higher-mode responses. Results show that a nonclassical stiffness-proportional model in which β_k is determined based on the second modal period of a base-isolated building can reasonably specify the intended damping to the higher modes without imparting undesirable damping to the first mode. The nonclassical stiffness-proportional damping can be introduced to the numerical model through explicit viscous damper elements attached between adjacent floors. In structural analysis software such as SAP2000®, the desired nonclassical damping can be also modeled through specifying damping solely to the superstructure material.  相似文献   

拉斯曼丘陵辐射平衡分量的观测研究          下载免费PDF全文

卞林根  陆龙骅  贾朋群 《极地研究》1991,3(4):42-53

本文对东南极拉斯曼丘陵地区1990年2年—1991年1月近地面辐射平衡的观测资料进行了初步研究。结果表明,该地区辐射平衡各分量有明显的日变化和年变化。夏季辐射强度大,寒季小。大气透明度全年都很好,透明度系数大多在0.8以上,寒季的透明度系数略大于暖季。年平均总辐射强度为119.2W/m~2,10—3月的总辐射累积量约占全年辐射总量的90％。年平均反射率0.42,夏季裸地平均反射率为0.27,寒季雪面平均反射率为0.51。年平均净辐射强度为11.7W/m~2,地表相对大气而言是热源。10—3月净辐射强度为64.1W/m~2,4—9年净辐射强度为-40.6W/m~2,前者说明地表在该段时间内吸收热量,后者为损失热量。  相似文献   

Simulation of the direct runoff hydrograph at basin outlet     

Florisa Melone  Corrado Corradini  Vijay P. Singh 《水文研究》1998,12(5):769-779

A simple model describing the transformation of effective rainfall to direct runoff through the overland flow mechanism is presented. The model is based on the classical representation of a watershed by a combination of planes and channels. The dynamics of overland flow in each plane is simulated by the non-linear kinematic wave, but the outflow from a given plane is concentrated in the middle of the corresponding drainage channel. The water routing in the channels is carried out by a piece-wise linearized formulation in space of the kinematic wave approximation. Using synthetic events on 10 watersheds, the model was tested by comparing it with results obtained by applying the non-linear kinematic wave to all the elements of the watershed. The model was found to be adequate, even in a form that simplifies the geometric features of the planes through an averaging procedure based on the Horton–Strahler ordering scheme of the watershed. © 1998 John Wiley & Sons, Ltd.  相似文献   

主动与被动状态下墙体侧向位移近似计算     

谢涛  罗强  张良  连继峰  于曰明 《岩土力学》2018,39(5):1682-1690

极限状态下墙体侧向位移对土压力计算和支挡结构设计影响显著。根据Rankine变形体和Coulomb刚塑体模型,将墙后土体变形分别当作单剪和直剪试验中试样的剪切过程,以达到极限剪切变形（剪应变或单位长度剪切位移）作为进入主被动状态标准,构建了土体变形与墙体位移的几何关系,提出了反映土体变形与强度特性,同时考虑静止时初始应力状态影响的墙体极限侧向位移近似计算模型。分析表明：土体极限剪切变形、滑移区范围、初始应力状态是影响墙体极限位移的核心要素,其中极限剪切变形占据主导作用,是导致不同颗粒组成及密实程度土体进入极限状态所需墙体位移差异显著的主要原因,而主被动区范围不同和因静止土压力系数 1引起的初始剪切变形,则是被动状态墙体位移远大于主动的关键因素;算例中主动与被动状态下墙体位移与墙高之比分别介于0.5‰～13.2‰和?0.4%～?5.2%,且主动状态下细粒土墙体位移大于粗粒土,计算结果与工程经验及相关文献模型试验基本一致。  相似文献   

基于冻融交界面直剪试验的冻土斜坡失稳过程研究   总被引：1，自引：0，他引：1  

高樯  温智  王大雁  牛富俊  谢艳丽  苟廷韬 《岩土力学》2018,39(8):2814-2822

为了探讨多年冻土区自然斜坡失稳机制,开展了不同含水率黏土、粉土、砂土的土-冰交界面直接剪切试验和相应融土的直接剪切试验。结果表明,砂土和砂土-冰冻融交界面剪切应力-变形特性主要表现为弹性变形,且剪应力存在明显峰值;粉土、黏土及相应的冻融交界面在很小的变形范围内表现为塑性变形,且剪应力无峰值。水分对砂土活动层抗剪强度影响较弱,表现为水分增高,内摩擦角小幅降低。水分对粉黏土活动层抗剪强度影响剧烈,表现为水分增高,粉黏土黏聚力急剧减小。研究发现,冻土区斜坡失稳更易发生于细颗粒粉黏土中。相对于粉土,粉土-冰冻融交界面抵抗剪切变形的能力更强,粉土斜坡潜在滑动面更易发育在冻融交界面上层附近;相对于黏土,黏土-冰冻融交界面抵抗剪切变形的能力更弱,黏土斜坡更易在冻融交界面处发生滑动。同时,细粒土斜坡极易在达到最大融化深度前提前失稳,斜坡坡度越高,失稳时间越提前。融化期活动层水分增多导致潜在滑动面黏聚力降低是细粒土冻土斜坡失稳的最主要原因,孔隙水压对冻土斜坡具有一定影响,在稳定性评价时要考虑活动层水位的影响。  相似文献   

修正剑桥模型在DPC桩—土结构层中的应用分析     

胡贺松  廖湘英  陈晓斌 《地质力学学报》2018,24(6):849-854

针对DPC桩-土结构层开展大型直剪试验,基于试验分析,在考虑DPC桩-土结构层注浆影响上引入临界应力比,构建了可描述应变软化的修正剑桥模型应力应变方程。直剪试验表明DPC桩-土结构层剪切特性表现为剪切软化,具有明显的峰值强度和残余强度,呈现出明显的结构性,其特征与超固结的黏土的剪切应力应变曲线特性类似。推导出的修正剑桥模型能较好的解释实验结果,所得出的结论对DPC桩的设计有一定的指导意义。   相似文献   

双向直驱式潮流能发电轮机性能实验研究     

王世明  杨志乾  田卡  吕超 《海洋工程》2017,35(3):119-124

针对潮流能双向来流的特点及当前潮流能发电轮机的研究现状和存在的问题,提出了一种新型的双向直驱式发电轮机。叶片基本翼型为S型,并对其进行受力分析,得到相应的计算公式,结合叶片翼型厚度和形状约束,求解出各个截面的形状,并三维建模形成一种新型"S"翼型轮机。轮机两端安装具有防水性能的永磁发电机,外侧增设双向导流罩,构成双向直驱式发电轮机装置模型。在水槽实验中,首先找出不同的模拟流速下获取功率的最佳负载阻值,在此基础上收集了转速及功率数据,绘制尖速比-获能系数关系曲线图和流速—获能系数关系曲线图,可以论证尖速比的取值对获取最佳功率的重要性,同时该翼型轮机具有良好的空载启动性能及双向吸收来流的能力,2 m/s流速下获能效率最大值接近40%。  相似文献   

Direct CPT and CPTu methods for determining bearing capacity of helical piles     

Amir Mansour Askari Fateh  Ahmad Fahimifar 《Marine Georesources & Geotechnology》2017,35(2):193-207

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.  相似文献