Grid-cell Aerosol Direct Shortwave Radiative Forcing Calculated Using the SBDART Model with MODIS and AERONET Observations:An Application in Winter and Summer in Eastern China     

Yunfei FU  Jiachen ZHU  Yuanjian YANG  Renmin YUAN  Guosheng LIU  Tao XIAN  Peng LIU 《大气科学进展》2017,34(8):952-964

Taking winter and summer in eastern China as an example application, a grid-cell method of aerosol direct radiative forcing(ADRF) calculation is examined using the Santa Barbara DISORT Atmospheric Radiative Transfer(SBDART) model with inputs from MODIS and AERONET observations and reanalysis data. Results show that there are significant seasonal and regional differences in climatological mean aerosol optical parameters and ADRF. Higher aerosol optical depth(AOD)occurs in summer and two prominent high aerosol loading centers are observed. Higher single scattering albedo(SSA) in summer is likely associated with the weak absorbing secondary aerosols. SSA is higher in North China during summer but higher in South China during winter. Aerosols induce negative forcing at the top of the atmosphere(TOA) and surface during both winter and summer, which may be responsible for the decrease in temperature and the increase in relative humidity.Values of ADRF at the surface are four times stronger than those at the TOA. Both AOD and ADRF present strong interannual variations; however, their amplitudes are larger in summer. Moreover, patterns and trends of ADRF do not always correspond well to those of AOD. Differences in the spatial distributions of ADRF between strong and weak monsoon years are captured effectively. Generally, the present results justify that to calculate grid-cell ADRF at a large scale using the SBDART model with observational aerosol optical properties and reanalysis data is an effective approach.  相似文献   

西天山气象因子对融雪期积雪深度影响通径分析     

胡淑娟  雷晓云  邢坤 《气象与环境科学》2017,40(3):33-37

积雪深度的变化受到多种气象因子共同影响。基于天山积雪雪崩站观测的水文气象资料,通过数理统计、标准化处理、通径分析等方法探索气象因子之间的相互作用对积雪深度变化的影响。研究结果表明:融雪期大气温度、净辐射、相对湿度等6个气象因子对积雪深度变化的影响程度不同,净辐射与积雪深度相关程度最高。气象因子之间有着不同程度的相互联系,相对湿度与降水之间的相关系数高达0.854,相对湿度与降水之间有着密切的联系。直接通径系数反映独立气象因子对积雪深度的直接影响程度,间接通径系数反映独立气象因子在其他气象因子的影响下对积雪深度的间接影响程度。根据积雪深度决定系数绝对值的大小可以得到,对积雪深度变化贡献力由大到小的气象因子依次为:净辐射、地表温度、大气温度、降水、相对湿度、风速;积雪深度的剩余系数为0.353,说明除了本研究的6个气象因子以外还存在着其他影响积雪深度变化的因素。  相似文献   

中国东南沿海地区PWV直接转换模型研究     

韦云  王迅  王浩  李黎  陈国栋  赵伟 《大地测量与地球动力学》2022,42(7):750-754

针对东南沿海地区GNSS大气可降水量(PWV)计算过程参数多、数据量大、效率不高且易产生累积误差等问题,本文基于中国东南沿海地区2017~2018年18个CORS站的GNSS数据,分析GNSS-PWV与对流层延迟(ZTD)、地面气温(T_s)和地面大气压(P_s)之间的线性关系,并利用多元线性拟合方法建立多因子GNSS-PWV直接转换模型,为研究区提供简捷高效的PWV计算方法。结果表明,GNSS-PWV与ZTD、P_s和T_s之间具有良好的相关性,相关系数分别为0.98、－0.65和0.78;基于ZTD、P_s和T_s的多因子PWV模型RMS为0.33 mm,精度最高,明显优于基于ZTD的单因子PWV模型（4.66 mm）,而基于ZTD和P_s的双因子PWV模型RMS为0.50 mm。  相似文献   

主动与被动状态下墙体侧向位移近似计算     

谢涛  罗强  张良  连继峰  于曰明 《岩土力学》2018,39(5):1682-1690

极限状态下墙体侧向位移对土压力计算和支挡结构设计影响显著。根据Rankine变形体和Coulomb刚塑体模型,将墙后土体变形分别当作单剪和直剪试验中试样的剪切过程,以达到极限剪切变形（剪应变或单位长度剪切位移）作为进入主被动状态标准,构建了土体变形与墙体位移的几何关系,提出了反映土体变形与强度特性,同时考虑静止时初始应力状态影响的墙体极限侧向位移近似计算模型。分析表明：土体极限剪切变形、滑移区范围、初始应力状态是影响墙体极限位移的核心要素,其中极限剪切变形占据主导作用,是导致不同颗粒组成及密实程度土体进入极限状态所需墙体位移差异显著的主要原因,而主被动区范围不同和因静止土压力系数 1引起的初始剪切变形,则是被动状态墙体位移远大于主动的关键因素;算例中主动与被动状态下墙体位移与墙高之比分别介于0.5‰～13.2‰和?0.4%～?5.2%,且主动状态下细粒土墙体位移大于粗粒土,计算结果与工程经验及相关文献模型试验基本一致。  相似文献   

基于冻融交界面直剪试验的冻土斜坡失稳过程研究   总被引：1，自引：0，他引：1  

高樯  温智  王大雁  牛富俊  谢艳丽  苟廷韬 《岩土力学》2018,39(8):2814-2822

为了探讨多年冻土区自然斜坡失稳机制,开展了不同含水率黏土、粉土、砂土的土-冰交界面直接剪切试验和相应融土的直接剪切试验。结果表明,砂土和砂土-冰冻融交界面剪切应力-变形特性主要表现为弹性变形,且剪应力存在明显峰值;粉土、黏土及相应的冻融交界面在很小的变形范围内表现为塑性变形,且剪应力无峰值。水分对砂土活动层抗剪强度影响较弱,表现为水分增高,内摩擦角小幅降低。水分对粉黏土活动层抗剪强度影响剧烈,表现为水分增高,粉黏土黏聚力急剧减小。研究发现,冻土区斜坡失稳更易发生于细颗粒粉黏土中。相对于粉土,粉土-冰冻融交界面抵抗剪切变形的能力更强,粉土斜坡潜在滑动面更易发育在冻融交界面上层附近;相对于黏土,黏土-冰冻融交界面抵抗剪切变形的能力更弱,黏土斜坡更易在冻融交界面处发生滑动。同时,细粒土斜坡极易在达到最大融化深度前提前失稳,斜坡坡度越高,失稳时间越提前。融化期活动层水分增多导致潜在滑动面黏聚力降低是细粒土冻土斜坡失稳的最主要原因,孔隙水压对冻土斜坡具有一定影响,在稳定性评价时要考虑活动层水位的影响。  相似文献   

修正剑桥模型在DPC桩—土结构层中的应用分析     

胡贺松  廖湘英  陈晓斌 《地质力学学报》2018,24(6):849-854

针对DPC桩-土结构层开展大型直剪试验,基于试验分析,在考虑DPC桩-土结构层注浆影响上引入临界应力比,构建了可描述应变软化的修正剑桥模型应力应变方程。直剪试验表明DPC桩-土结构层剪切特性表现为剪切软化,具有明显的峰值强度和残余强度,呈现出明显的结构性,其特征与超固结的黏土的剪切应力应变曲线特性类似。推导出的修正剑桥模型能较好的解释实验结果,所得出的结论对DPC桩的设计有一定的指导意义。   相似文献   

双向直驱式潮流能发电轮机性能实验研究     

王世明  杨志乾  田卡  吕超 《海洋工程》2017,35(3):119-124

针对潮流能双向来流的特点及当前潮流能发电轮机的研究现状和存在的问题,提出了一种新型的双向直驱式发电轮机。叶片基本翼型为S型,并对其进行受力分析,得到相应的计算公式,结合叶片翼型厚度和形状约束,求解出各个截面的形状,并三维建模形成一种新型"S"翼型轮机。轮机两端安装具有防水性能的永磁发电机,外侧增设双向导流罩,构成双向直驱式发电轮机装置模型。在水槽实验中,首先找出不同的模拟流速下获取功率的最佳负载阻值,在此基础上收集了转速及功率数据,绘制尖速比-获能系数关系曲线图和流速—获能系数关系曲线图,可以论证尖速比的取值对获取最佳功率的重要性,同时该翼型轮机具有良好的空载启动性能及双向吸收来流的能力,2 m/s流速下获能效率最大值接近40%。  相似文献   

Direct CPT and CPTu methods for determining bearing capacity of helical piles     

Amir Mansour Askari Fateh  Ahmad Fahimifar 《Marine Georesources & Geotechnology》2017,35(2):193-207

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.  相似文献   

Response to ‘Discussion of paper “Development of a family of unconditionally stable explicit direct integration algorithms with controllable numerical energy dissipation” by Chinmoy Kolay and James M. Ricles’ in Earthquake Engineering and Structural Dynamics 2014; 43:1361–1380          下载免费PDF全文

Chinmoy Kolay  James M. Ricles 《地震工程与结构动力学》2015,44(2):329-332

  相似文献   

一种控制直剪蠕变试验剪应力的简易装置     

滕超  王卫  谢鲁钧  王伟  闫东洋 《岩土力学》2014,35(10):3035-3040

土的蠕变是指土在保持应力不变的条件下,应变随时间延长而增加的现象。研究土的蠕变性质对于确定土的长期强度有重要意义,土的蠕变研究也是近几年的研究热点。然而,土的蠕变试验周期特别长,因此简便、易行又有一定可信度的蠕变试验仪器,对于土蠕变性质的研究有较大的推动意义。直剪蠕变试验是研究确定土的蠕变性质的一种最简单、最直观的试验方法。但由于该试验只是控制剪切力不变,剪切过程中,试样受剪面积逐渐减小,剪应力持续增大,整个过程并不是蠕变。通过在传统仪器上附加一个简单装置,利用液体的浮力来控制试验剪切力,从而使得试样在剪切过程中的剪应力不变。在对仪器进行相应改进后,做了对比试验,检验该装置对剪应力的控制效果,试验结果表明,该简易装置可在一定程度上控制剪应力。  相似文献