滑坡治理中格构锚固结构的解析解分析   总被引：17，自引：0，他引：17  

许英姿  唐辉明 《地质科技情报》2002,21(3):89-93

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中  相似文献   

大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示   总被引：3，自引：0，他引：3  

李英康  董树文等 《地质论评》2002,48(1):15-23

综合宽角反射、近垂直反射的探测结果和有关地质资料，对大别造山带地壳结构和超高压变质带研究显示：大别造山带地壳具有层块结构特征。沿安义－庄墓剖面，上地壳有7个弹性块体，中地壳有5个，下地壳有4个。扬子与华北地块的主缝合带是超高压变质带，扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖－马庙断裂，磨子潭－晓天断裂是大别造山带的北界，北淮阳构造带呈楔状向下插入，它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立，下地壳向西倾斜。超高压变质带的厚度为5－7km，产状向北插入到北大别块体之下，折返过程是构造就位，不是大别山的均匀抬升，折返的主运动面是水吼－五河高温剪切带。  相似文献   

Numerical evaluation of the damping‐solvent extraction method in the frequency domain     

Ushnish Basu  Anil K. Chopra 《地震工程与结构动力学》2002,31(6):1231-1250

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

裂隙型单斜介质中弹性系数的计算及波的传播特性研究   总被引：3，自引：1，他引：3  

王德利  何樵登 《吉林大学学报(地球科学版)》2002,32(2):181-186

根据Hudson等关于裂隙介质弹性系数计算的扰动理论及Bond变换矩阵原理，给出了各向同性介质中含多组垂直裂隙时等效弹性系数的计算方法。计算了含两组斜交的垂直裂隙形成的单斜各向异性介质中的等效弹性系数，并根据Christoffel方程推导、得出水平面内平面波传播的相速度和群速度随方位变化的特性。  相似文献   

冲击压实技术在路基工程中的应用研究     

吴家祥  苏传福 《安徽地质》2002,12(4):323-326

通过介绍冲击压实机基本原理,分析冲击压实技术特点,结合工程实例,表明冲击压实技术具有减少路基工后沉降、提高路基整体强度及加固软弱地基作用效果显著,同时填石路堤施工工艺的改进和压实标准进行了研究.  相似文献   

A non-linear stress-stiffness model for geomaterials at small to intermediate strains     

S. Shibuya 《Geotechnical and Geological Engineering》2002,20(4):333-369

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.  相似文献   

Static deformation of two welded monoclinic elastic half-spaces due to a long inclined strike-slip fault     

Anil Kumar  Sarvajit Singh  Jagdish Singh 《Journal of Earth System Science》2002,111(2):125-131

Static deformation of two monoclinic elastic half-spaces in welded contact due to a long inclined strike-slip fault situated in one of the half-spaces is studied analytically and numerically. Closed-form algebraic expressions for the displacement at any point of the medium are obtained. The variation of the displacement at the interface with the horizontal distance from the fault is studied. The effect of anisotropy on the displacement field is examined. It is found that while the anisotropy of the source half-space has a significant effect on the displacement at the interface, the anisotropy of the other half-space has only a marginal effect.  相似文献   

大陆岩石圈有效弹性厚度的计算及其地质意义   总被引：4，自引：1，他引：4  

袁炳强  Yvette H.Poudjom Djomani  程顺有  陆关祥 《地球学报》2002,23(3):269-272

大陆范围内Te值有很大的范围，不同构造单元有不同的Te值。Te值的大小与岩石圈的热结构（热年龄）、壳幔耦合等因素有关。同时Te值和地壳厚度、地表有关矿产的分布、岩石圈地幔的物质组成等也有一定关系。  相似文献   

软基上高速铁路路桥过渡段的技术措施研究   总被引：2，自引：0，他引：2       下载免费PDF全文

杨广庆  彭华  刘建坤 《探矿工程》2002,(5):13-15

通过对高速铁路路基与桥梁过渡段动力特性分析，指出结构物沉降差是导致轨面不平顺的主要因素。分析了沉降差产生的原因，提出了软基上路桥过渡段的结构设计方案，并对其施工方法及质量检测标准进行了探索。  相似文献   

半无限空间中圆形孔洞周围SH波的散射   总被引：14，自引：5，他引：14  

林宏  刘殿魁 《地震工程与工程振动》2002,22(2):9-16

建立了求解在含有圆形孔洞的弹性半空间中SH波散射与圆形孔洞附近动应力集中问题的解析方法。利用SH波散射的对称性和多极坐标的方法，构造了一个可以预先满足半空间自由表面上应力自由边界条件的圆形孔洞对SH波散射的波函数。利用这一波函数，则可将该问题转化成对一个圆形孔洞散射的求解问题。该问题的解答最终又可归结为对一组无究代数方程组的求解问题，并可利用截断有限项的方法对其进行计算，最后给出了有关圆形也洞附近动应力集中问题的算例和数值结果，并讨论了波数与圆孔至自由边界距离变化对动应力集中的影响。  相似文献