Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow     

顾杰  李志伟杨红 詹咏 《中国海洋工程》2007,21(2):305-316

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.  相似文献   

Design of ship's bow form by potential-based panel method     

Jaehoon Yoo   《Ocean Engineering》2007,34(8-9):1089-1095

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.  相似文献   

梭鱼标准代谢、内源氮排泄与体重和温度的关系   总被引：5，自引：0，他引：5  

线薇薇  朱鑫华 《中国海洋大学学报(自然科学版)》2002,32(3):368-374

在 13.5 ,18,2 1.5 ,2 4和 2 7℃ 5个温度条件下测定了梭鱼 (体重范围 1.88～ 14.0 2 g)的标准代谢率和内源氮排泄率。梭鱼标准代谢率随体重的增加而增加 ,二者的关系为幂函数关系 ;随温度的升高而增加 ,二者的关系为指数关系 ;标准代谢率与体重和温度的关系可用如下方程表示 :RS=0 .12 4 6 W0 .9954 e0 .0 84 1T(r2 =0 .92 2 0 )。梭鱼的氨氮、尿素、总氮及能量的排泄率随体重和温度的增加而增加 ,与体重为幂函数关系 ,与温度的关系为多项式形式。梭鱼氨氮和尿素日排泄率的变幅分别为 0 .15～ 0 .88mg N/d和 0 .0 3～ 0 .2 9mg N/d。不同温度下 ,尿素排泄量占总氮比例在 9.9%～2 2 .4 9%之间 ,随温度升高该值有逐渐增大的趋势。  相似文献   

A model of the formation and development of ocean shear wave     

Qiao Fangli  Zhang Qinghua 《海洋学报(英文版)》1994,13(3):345-359

Ａｍｏｄｅｌｏｆｔｈｅｆｏｒｍａｔｉｏｎａｎｄｄｅｖｅｌｏｐｍｅｎｔｏｆｏｃｅａｎｓｈｅａｒｗａｖｅ￥ＱｉａｏＦａｎｇｌｉａｎｄＺｈａｎｇＱｉｎｇｈｕａ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ｓｔａｔｅｏｃｅａｎｉｃＡｄｍｉｎｉｓ...  相似文献   

南海波高熵和风速熵   总被引：4，自引：0，他引：4  

郭佩芳  施平  孙孚  戚建华 《海洋与湖沼》1997,28(2):185-191

根据风速的统计分布，给出了有因次风速熵和无因次风速熵的定义及其计算方法，使用ＧＥＯＳＡＴ高度计１９８６年１１月－１９８９年２月的有效波高和风速的资料，计算，分析了南海海域上的波高熵，风速熵，给出它们的时间变化特征和空间变化特征，并对不同随机量的无因次熵，即随机度进行了比较。  相似文献   

Pitfalls in the estimation of wind wave directional spectra by variational principles     

Jos Ochoa  Oscar E. Delgado-Gonzlez 《Applied Ocean Research》1990,12(4):180-187

  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

晚第四纪冲绳海槽北段CaCO3含量的时空变化及其控制因素     

李军  李凤业  周永青  齐金成  厉玉乐 《海洋地质与第四纪地质》2004,24(2):15-22

对取自冲绳海槽北段的6个沉积岩心进行了CaCO3含量、粒度和铀系同位素分析，结合氧同位素数据和海槽其他钻孔的相应结果，探讨了冲绳海槽北部晚第四纪以来CaCO3含量的垂向与横向变化特征。结果表明，冲绳海槽北段沉积总体上表现为全新世CaCO3含量高、晚更新世CaCO3含量低的“大西洋型”碳酸盐演化特征，但冲绳海槽北段和中部的碳酸盐演化特征并不一致，海槽内西坡、槽底和东坡的不同部位其演化特征也存在较大差异。碳酸盐含量的变化与沉积物粒度特征密切相关，晚第四纪冲绳海槽碳酸盐演化的时空差异是多种因素相互作用的结果。  相似文献   

不同软基处理方法适用性比较   总被引：8，自引：0，他引：8  

熊丛博  于定勇 《海岸工程》2003,22(1):20-26

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。  相似文献   

面向GIS的线状符号开放式多元设计方案   总被引：4，自引：0，他引：4  

吴自银 《海洋通报》2003,22(1):70-76

提出一种跨越专业限制，用于快速绘制任意曲率曲线的开放式线状符号“组合配置法”设计方案，即用主干线、辅助线、辅助圆和点符号等四种子线型的有机组合描述目标线型，并详细论述了其数据结构、文件结构及子线型的实现方法。同时还提出伪码法用于解决满足国标要求的图廓整饰线，并对裁剪法作了简要阐述。上述线型设计方法已成功设计、实现并应用于“海底地形成图系统(MBChar)”，已服务于大陆架海底成图项目。  相似文献