The DynaMICCS perspective     

S. Turck-Chièze  P. Lamy  C. Carr  P. H. Carton  A. Chevalier  I. Dandouras  J. M. Defise  S. Dewitte  T. Dudok de Wit  J. P. Halain  S. Hasan  J. F. Hochedez  T. Horbury  P. Levacher  M. Meissonier  N. Murphy  P. Rochus  A. Ruzmaikin  W. Schmutz  G. Thuillier  S. Vivès 《Experimental Astronomy》2009,23(3):1017-1055

The DynaMICCS mission is designed to probe and understand the dynamics of crucial regions of the Sun that determine solar variability, including the previously unexplored inner core, the radiative/convective zone interface layers, the photosphere/chromosphere layers and the low corona. The mission delivers data and knowledge that no other known mission provides for understanding space weather and space climate and for advancing stellar physics (internal dynamics) and fundamental physics (neutrino properties, atomic physics, gravitational moments...). The science objectives are achieved using Doppler and magnetic measurements of the solar surface, helioseismic and coronographic measurements, solar irradiance at different wavelengths and in-situ measurements of plasma/energetic particles/magnetic fields. The DynaMICCS payload uses an original concept studied by Thalès Alenia Space in the framework of the CNES call for formation flying missions: an external occultation of the solar light is obtained by putting an occulter spacecraft 150 m (or more) in front of a second spacecraft. The occulter spacecraft, a LEO platform of the mini sat class, e.g. PROTEUS, type carries the helioseismic and irradiance instruments and the formation flying technologies. The latter spacecraft of the same type carries a visible and infrared coronagraph for a unique observation of the solar corona and instrumentation for the study of the solar wind and imagers. This mission must guarantee long (one 11-year solar cycle) and continuous observations (duty cycle > 94%) of signals that can be very weak (the gravity mode detection supposes the measurement of velocity smaller than 1 mm/s). This assumes no interruption in observation and very stable thermal conditions. The preferred orbit therefore is the L1 orbit, which fits these requirements very well and is also an attractive environment for the spacecraft due to its low radiation and low perturbation (solar pressure) environment. This mission is secured by instrumental R and D activities during the present and coming years. Some prototypes of different instruments are already built (GOLFNG, SDM) and the performances will be checked before launch on the ground or in space through planned missions of CNES and PROBA ESA missions (PICARD, LYRA, maybe ASPIICS).  相似文献   

松辽盆地朝阳沟阶地扶余-杨大城子油层油源分析与油气运移模式   总被引：2，自引：0，他引：2       下载免费PDF全文

张雷  卢双舫  王伟明 《地质科学》2009,44(2):560-570

基于生物标志化合物参数,系统对比分析了朝阳沟阶地扶余-杨大城子油层原油与三肇凹陷及朝阳沟阶地青山口组-段源岩的关系,表明朝阳沟阶地扶余油层有两个主要油源,即三肇凹陷青-段源岩与朝阳沟本地区青-段源岩,且两者对扶余油层的贡献量可能基本相同.朝阳沟地区杨大城子油层原油与三肇凹陷青-段源岩有密切的亲缘关系,与朝阳沟青-段源岩亲缘关系不明显.这与朝阳沟阶地源岩超压值相对较小、导致油气下排距离浅、进入杨大城子油层的油气量较小相符.在油源对比的基础上,结合断裂和砂体分布等各种地质条件,将朝阳沟阶地油气运移模式分为远源长距离侧向运移和近源短距离侧向运移两种类型.  相似文献   

地球自由振荡弹性简正模研究进展与展望     

栾威  申文斌  丁浩 《地球与行星物理论评》2021,(3):308-325

在构建现代地球模型时,地球内部分层结构主要是根据地震波资料确定的;而地球内部密度及弹性参数,特别是地幔以下大尺度结构的密度分布,则主要是根据地球自由振荡的弹性简正模观测资料确定的.本文概述了地球自由振荡简正模本征值的求解理论和方法,介绍了球型和环型模态位移场表达式,讨论了地球自由振荡模态的衰减、分裂与耦合效应;总结了多线态分裂谱线探测和分裂参数估计的方法,综述了利用弹性简正模开展地震矩张量、地球三维非均匀性结构和内核超速旋转约束与反演研究的主要进展和存在的问题.最后作为展望,本文还讨论了地球自由振荡简正模的未来研究趋势.  相似文献   

老厂矿区煤中汞的成因类型和赋存状态   总被引：9，自引：2，他引：7  

周义平 《煤田地质与勘探》1994,22(3):17-22

老厂矿区无烟煤中的汞有两种成因类型:陆源沉积型和后期矿化叠加型,后者的含汞丰度显著高于前者。低硫煤中汞的主要载体为粘土矿物,高硫煤中为黄铁矿;有机汞含量较低并随煤中黄铁矿含量及其含汞性的增高而增高。根据实测数据计算了不同类型煤中各物质成分的汞丰度;对煤中汞的可造性作了初步评价;预测了燃煤电站排气中汞的平均浓度。   相似文献   

煤中常量元素的赋存特征与研究意义   总被引：11，自引：0，他引：11  

代世峰  任德贻  唐跃刚 《煤田地质与勘探》2005,33(2):1-5

煤中常量元素 (包括Na、Mg、Al、Si、K、Ca、Ti、P和Fe)是煤的重要无机组成,也是影响煤物理化学性质及加工利用的主要影响因素。本文结合华北鄂尔多斯盆地、开滦矿区和峰峰矿区晚古生代煤、贵州西部晚二叠世煤的具体实例,对煤中常量元素的赋存状态、地质成因和指相意义进行了总结,并对煤中常量元素在煤加工利用过程中的影响做了简要陈述。   相似文献   

中、低纬太平洋ARGO测站Rossby内波垂直模态的数值计算     

叶志敏  张铭 《海洋通报》2004,23(6):1-7

针对中、低纬太平洋ARGO测站的4个实际层结个例,计算了无背景流下准地转海洋Rossby内波的垂直模态。结果表明,海水层结垂直方向的不均匀和跃层的存在,使该垂直模态的波型发生了歪曲变形,致使其偏离了余弦波：跃层越强,这种变形也越大：层结最强的层次对应着最大的波动振幅,多极值的层结对应着多个极大振幅：该内波垂直结构函数的零点随模态序数依次递增,且其零点在海水层结较强的层次要比较弱的层次密集。  相似文献   

胶东焦家断裂带3000 m深部矿化特征及金矿物赋存状态     

孙雨沁  于学峰  单伟  熊玉新  张岩  迟乃杰  舒磊  李敏  程伟 《地球学报》2020,41(6):919-937

胶东是我国黄金的主要产地, 前人已开展大量矿床学研究, 但主要集中在浅部, 其深部的成矿研究仍然薄弱。本文以目前最深的见矿钻孔为研究对象, 在宏观观察描述的基础上, 以电子探针为主要研究方法, 在微观上系统开展深部金矿的矿相学和元素地球化学研究, 为深部金矿成矿特征提供了第一手的基础资料, 研究结果对于深入认识焦家金矿带矿床的成因以及进一步的深部找矿预测都具有重要意义。超深科研钻ZK01井位于莱州吴一村地区, 是目前焦家断裂带最深的见矿钻孔, 也是我国岩金最深见矿孔。深钻蚀变类型主要有钾化、硅化、黄铁矿化、绢英岩化、黄铁绢英岩化、绿泥石化和碳酸盐化, 矿石类型为黄铁绢英岩化碎裂岩和黄铁绢英岩化花岗质碎裂岩, 矿体多以脉状、细脉网脉状、细脉浸染状为主。载金矿物主要为黄铁矿, 少数金矿物分布在黄铜矿、石英和钾长石中。焦家带深部矿石金矿物成色较高, 主要为含银自然金, 其次为银金矿, 说明该深钻深部金矿形成于高温、较深的成矿环境; 成矿时代相对较老。Au主要有两种赋存形式: 独立的金矿物和不可见金即晶格金。独立金矿物可分为三种赋存状态, 即包体金、裂隙金和晶隙金。初步认为矿石矿物生成顺序从早到晚依次为: (不含Pb黄铁矿、方铅矿、辉铋矿、金矿物)→(黄铜矿)→(含Pb黄铁矿)→(方铅矿、金矿物)→(重晶石)→(闪锌矿)。深钻成矿热液存在多期活动, 碎裂岩带为含金热液运移提供了通道, 多重成矿阶段的叠加和复合导致金矿物多期次结晶。  相似文献   

云南墨江金厂矿床金镍赋存状态及成因关系探讨     

周凯  张洪瑞  柴鹏  张慧超  程先锋  杨澍 《矿床地质》2020,39(1):97-110

墨江金厂金镍矿床位于哀牢山造山带中段,九甲—安定大断裂上盘,是西南三江成矿带内一个独特的金镍矿床。本文在详细野外地质调查基础上,通过显微镜下观察、扫描电镜和能谱分析,结合矿石微量元素分析,对矿石中金、镍赋存状态及成因关系进行了研究。结果显示,金赋存形式主要有可见金和不可见金。可见金又可分为粒间金和包体金;不可见金是以Au~+赋存于硫锑铜银矿、黄铁矿中。镍赋存状态有两种:一是以独立矿物,如辉砷镍矿、锑硫镍矿等存在;二是以离子态赋存于黄铁矿、硫锑铜银矿中。矿石结构构造、矿物共生组合及微量元素含量等显示,金和镍为同期热液成矿,金来自岩浆热液系统远端的低温热液,镍是含金低温热液流经超基性岩体时萃取而来。成矿过程可分为早期富硅质热液和晚期富钙质热液两个阶段,成矿是在幕式构造活动下多期流体运移和沉淀的结果。  相似文献   

Higher-mode force response in multi-story strongback-braced frames     

Barbara G. Simpson Ph.D. 《地震工程与结构动力学》2020,49(14):1406-1427

Strongback-braced frames employ an essentially elastic steel truss, or strongback, that distributes demands more uniformly to delay or prevent story mechanisms. Because inertial forces are no longer limited by the formation of a story mechanism, strongback-braced frames can exhibit large elastic force demands, particularly in the higher modes. This paper characterizes the higher-mode force response of strongback-braced frames. Four-story archetypes were designed using nonlinear dynamic analyses to incorporate higher-mode force demands into the design process. The response of the archetypes was compared with that of reference buckling-restrained braced frames that were allowed to form story mechanisms. The force demands in the strongback were then described using equivalent-static forces to represent the inertial forces induced by the higher modes. Force demands in the strongback arise from a yielding first-mode ‘pivoting’ and elastic higher-mode ‘bending’ response. These higher-mode force demands are elastic, ill-constrained by the strength of the yield mechanism, and depend significantly on the choice of ground motion record used for the analysis. In remaining elastic in the higher modes, the strongback distributes demands more uniformly and mitigates the formation of story mechanisms. Consequently, design and analysis methods for strongback-braced frames need to include estimates for these near-elastic higher-mode force demands.  相似文献   

考虑间歇充填和浓度效应的充填体长期强度试验研究     

曹帅  宋卫东  薛改利 《岩土力学》2018,39(Z1):341-347

为探究不同充填间隔时间(FTS)和料浆浓度对胶结充填体长期强度影响机制,配制70%、72%、75%三个浓度、充填间隔时间为12、24、36、48 h的两分层胶结充填体试件,开展单轴抗压强度(UCS)试验并探究其力学特性及其破坏形式。试验结果表明,（1）胶结充填体峰值抗压强度随充填间隔时间增大而呈递减趋势,充填间隔时间一定时胶结充填体抗压强度随料浆浓度增大而增大,且峰值抗压强度与充填间隔时间呈多项式函数规律;（2）胶结充填体试件加载过程中表现为压密阶段、线弹性阶段、裂纹扩展阶段和破坏发展4个阶段,随充填间隔时间延长,胶结充填体的破坏形式可能表现为张拉破坏–拉剪破坏过渡–拉剪混合破坏的损伤模式。研究结论能够为后期充填体强度设计和稳定性控制提供有益参考。  相似文献