The initiation and development of metamorphic foliation in the Otago Schist, Part 2: evidence from quartz grain-shape data   总被引：1，自引：0，他引：1  

A. STALLARD  D. SHELLEY  S. REDDY 《Journal of Metamorphic Geology》2005,23(6):443-459

Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.  相似文献   

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction   总被引：1，自引：0，他引：1  

T.I. Ivankina  H.M. Kern  A.N. Nikitin 《Tectonophysics》2005,407(1-2):25-42

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.  相似文献   

大学城的另类定位--广州旅游的"太阳"   总被引：1，自引：0，他引：1  

张立建  周礼坤 《云南地理环境研究》2005,17(3):62-64

从旅游的角度,运用定性分析和比较分析的方法,分析广州大学城,发现它在广州所有景区中,最有资格和条件担当广州旅游的“太阳”。它位于广州市番禺区新造镇小谷围岛,投资规模、大学数量、占地面积和规划人口容量皆为中国之最,是世界最大的人造景区,具有浓浓的文化氛围、时代气息,能够体现与闪烁广州的灵魂与精神。为此,广州应在大学城的建设中为未来角色创造更好的条件。  相似文献   

多角度倾斜摄影技术在自动纹理映射上的应用     

王卿 《测绘与空间地理信息》2016,(10):198-200

利用多角度倾斜摄影技术获取的倾斜影像成果来更新和构建城市三维实景纹理映射成为数字城市建设中的一个重要应用。本文采用基于DLG和3Dmax生成的建筑物模型,结合SWDC-5的多角度倾斜影像,通过自动选择纹理、自动编辑纹理、自动纹理映射等一系列步骤,自动生成大区域建筑物三维实景数字城市。并通过实验数据对该计算方法的可靠性进行验证,结果表明:该系统的数字化程度远远高于传统方法。  相似文献   

以SRTM-DEM为控制的光学卫星遥感立体影像正射纠正   总被引：3，自引：1，他引：2  

张浩  张过  蒋永华  汪韬阳 《测绘学报》2016,45(3):326-331

针对全球测图缺少统一的控制基准的问题,提出了利用SRTM-DEM作为控制基准,对光学卫星遥感影像进行正射纠正的方法。首先,对光学卫星影像构建的立体影像对进行自由网平差并制作DEM;然后,以SRTM-DEM作为控制,将DEM作为单元模型,进行独立模型法DEM区域网平差,获得单元模型的定向参数;最后,改正立体影像的成像几何模型参数,进行正射纠正。选取湖北咸宁和江西某地两个测区的资源三号数据进行试验,试验结果表明,资源三号正视全色影像的平面定向精度由12.93像素提高到6.85像素。  相似文献   

Reflex ACT岩心定向设备及其工程应用          下载免费PDF全文

凌振武  刘亚斌  董树伟  王成立  骆建诗 《探矿工程》2016,43(3):60-64

岩心定向技术是一种可直接准确获得岩矿层原始产状的工程技术。本文介绍了澳大利亚Reflex公司生产的Reflex ACT系列岩心定向设备的结构组成、技术参数、工作原理以及该设备岩心定向工艺的操作过程。Reflex ACT系列岩心定向设备在青海滩涧山金矿的应用取得了很好的效果,达到了矿区的要求。结合该矿区90个钻孔的应用数据,分析了影响定向效果的因素,总结了使用该设备的经验和体会。  相似文献   

MORPHOMETRIC ANALYSIS OF KARST DEPRESSIONS ON A MEDITERRANEAN KARST MASSIF          下载免费PDF全文

EULOGIO PARDO‐IGÚZQUIZA  ANTONIO PULIDO‐BOSCH  MANUEL LÓPEZ‐CHICANO  JUAN J. DURÁN 《Geografiska Annaler: Series A, Physical Geography》2016,98(3):247-263

Dolines are the most typical landform in karst landscapes. They play an important role in karst hydrogeology; they are effective sediment traps that provide information about past climates and karst evolution, and can also be indicators of tectonic activity. The morphometic analysis of those depressions can help in their study and interpretation. However, detailed identification and delineation of dolines becomes increasingly difficult when the study area is very large, of limited access or covered by vegetation. Here, we have used a method developed by the authors for automatic identification and delineation of karst depressions based on the use of a pit removal algorithm. Next a complete morphometric analysis of the karst depressions has been carried out. The main advantage of the methodology is that by delineating and identifying the depth of each doline from its rim, many morphometric statistics can be obtained, including the relation of doline depth and area with respect to altitude, the main doline orientations, doline density, the fractal dimension of doline area and frequency, and point field analysis, among others. The results are interpreted from a geomorphological point of view and the mapped dolines can be easily integrated into geomorphological mapping. A case study is presented from the large Sierra Gorda karst massif in southern Spain, where 3100 depressions have been identified. A strong structural control of doline shape and orientation is demonstrated; the main areas of doline density are highlighted and doline size is shown to follow a fractal law.  相似文献   

Inter‐laboratory Characterisation of Apatite Reference Materials for Chlorine Isotope Analysis     

Alicja Wudarska  Ewa S&#x;aby  Michael Wiedenbeck  Jaime D. Barnes  Magali Bonifacie  Neil C. Sturchio  Grard Bardoux  Frdric Couffignal  Johannes Glodny  Linnea Heraty  Timm John  Christof Kusebauch  Sathish Mayanna  Franziska D. H. Wilke  Ewa Deput 《Geostandards and Geoanalytical Research》2021,45(1):121-142

Here we report on a set of six apatite reference materials (chlorapatites MGMH#133648, TUBAF#38 and fluorapatites MGMH#128441A, TUBAF#37, 40, 50) which we have characterised for their chlorine isotope ratios; these RMs span a range of Cl mass fractions within the apatite Ca₁₀(PO₄)₆(F,Cl,OH)₂ solid solution series. Numerous apatite specimens, obtained from mineralogical collections, were initially screened for ³⁷Cl/³⁵Cl homogeneity using SIMS followed by δ³⁷Cl characterisation by gas source mass spectrometry using both dual‐inlet and continuous‐flow modes. We also report major and key trace element compositions as determined by EPMA. The repeatability of our SIMS results was better than ± 0.10‰ (1s) for the five samples with > 0.5 % m/m Cl and ± 0.19‰ (1s) for the low Cl abundance material (0.27% m/m). We also observed a small, but significant crystal orientation effect of 0.38‰ between the mean ³⁷Cl/³⁵Cl ratios measured on three oriented apatite fragments. Furthermore, the results of GS‐IRMS analyses show small but systematic offset of δ³⁷Cl_SMOC values between the three laboratories. Nonetheless, all studied samples have comparable chlorine isotope compositions, with mean 10³δ³⁷Cl_SMOC values between +0.09 and +0.42 and in all cases with 1s ≤ ± 0.25.  相似文献   

Magnetostriction of Fe₈₁Ga₁₉ oriented crystals     

王智彬  刘敬华  蒋成保 《海洋学报(英文版)》2010,29(11)

The effect of the orientation on the magnetostriction in Fe₈₁Ga₁₉ alloy has been investigated experimentally and theoretically. The Fe₈₁Ga₁₉ [001] and [110] oriented crystals were prepared and the magnetostriction was measured under different pre-stress. The saturation magnetostriction of the [001] oriented crystal increases from 170×10^-6 to 330×10^-6 under the pre-stress from 0 to 50 MPa. The [110] oriented crystal has a saturation magnetostriction from 20×10^-6 to 140×10^-6 with the compressive pre-stress from 0 to 40 MPa. The magnetostriction of [001] and [110] oriented crystals has been simulated based on the phenomenological theory. The domain rotation path has been determined and the resultant magnetostriction calculated under different pre-stress. The experimental and simulated results both show that the [001] oriented crystal exhibits better magnetostriction than [110] oriented crystal. The enhancement of the saturation magnetostriction by the compressive pre-stress in the [110] oriented crystal is higher than that in the [001] oriented crystal.  相似文献   

南极地区小象幅航测内业成图          下载免费PDF全文

肖应华  王茜 《极地研究》1995,7(3):95-100

本文阐述了用１２０型非量测相机对南极中山站地区所摄制的１４００００小象幅航片制作１５０００地形图、正射像片图及１１００００地形图的原理、方法和精度。在外定向中适当增加控制点及考虑到加入适当的权的情况下，其外定向最大对点误差平面为２．２ｍ，高程为１．２ｍ。所制作的正射像片图和相应的地形图套合中误差为０．１４ｍｍ。其结果完全可满足南极科研、考察的要求  相似文献